Re: Re: Performance issues with Areca 1680 SAS Controllers

[Drew]

> The problem is while Areca is doing the flushing _all_ IOs are really slow,
> including the other raid-10 array for the OS, which uses totally separate physical disks.
>
> Opening another shell in screen takes at least 30 seconds, starting "top"
> takes forever etc..
>
> While Areca is flushing the caches (and all the IOs are slow), "iostat 1"
> doesn't show any "leftover" IOs from the benchmark. So the benchmark was
> really using direct IO, bypassing kernel caches.
>
> I tried with different io-schedulers (cfq,deadline,noop) but they didn't
> have big effect.. which makes sense, since the OS/kernel is not doing any
> big IO when the 'stalling' happens.
>
> Is there some way to make Areca NOT use all cpu-power for cache flushing?

Is top showing 100% cpu usage?

It wouldn't surprise me if the Areca's internal bus / processor is
getting swamped. With the RAID60 chewing through two PQ calculations
over 14 disks I'd expect the performance of other arrays on the
controller would take a hit

I've seen similar symptoms when moving massive amounts of data between
disks on my servers. IO maxes out the bus, system responsiveness goes
down as evidenced by slowly loading apps, and top still shows minimal
CPU usage.


-- 
Drew

"Nothing in life is to be feared. It is only to be understood."
--Marie Curie
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/