Re: [PATCH 1/3] cs5535-gpio: add AMD CS5535/CS5536 GPIO driver support
From: Andres Salomon
Date: Fri Aug 28 2009 - 15:52:07 EST
On Sun, 23 Aug 2009 11:22:14 +0200
Alessandro Zummo <alessandro.zummo@xxxxxxxxxxxx> wrote:
> On Tue, 18 Aug 2009 17:53:14 -0400
> Andres Salomon <dilinger@xxxxxxxxxxxxxxx> wrote:
>
> >
> > This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip
> > backend (allowing GPIO users to use the generic GPIO API if
> > desired) while also allowing architecture-specific users directly
> > (via the cs5535_gpio_* functions).
> >
> > Tested on an OLPC machine. Some Leemotes also use CS5536 (with a
> > mips cpu), which is why this is in drivers/gpio rather than
> > arch/x86. Currently, it conflicts with older geode GPIO support;
> > once MFGPT support is reworked to also be more generic, the older
> > geode code will be removed.
> >
> > Signed-off-by: Andres Salomon <dilinger@xxxxxxxxxxxxxxx>
>
> fwiw,
>
> Reviewed-by: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
>
Thanks!
> > + dev_info(&pdev->dev, "allocated PCI BAR #%d: base
> > 0x%llx\n", GPIO_BAR,
> > + (unsigned long long)
> > cs5535_gpio_chip.base);
>
> shouldn't this be dev_dbg ?
>
I prefer to see it when the driver is loaded (as info).
> >
> > + /* finally, register with the generic GPIO API */
> > + err = gpiochip_add(&cs5535_gpio_chip.chip);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to register gpio
> > chip\n");
>
> gpiochip_add already uses pr_err for error conditions, there's no
> need to report twice.
>
Hm, you're right. Andrew, can you please add/merge the patch below?
> > + goto release_region;
> > + }
> > +
> > + printk(KERN_INFO DRV_NAME ": GPIO support successfully
> > loaded.\n");
>
> I'd use dev_xxx here, maybe it's worth to have a generic one
> in gpiochip_add .
>
>
Noted and changed (along w/ a few other printks). Thanks!
From: Andres Salomon <dilinger@xxxxxxxxxxxxxxx>
Subject: [PATCH] cs5535-gpio: make printk usage consistent
Clean up places where we were using printk()s instead of dev_*.
Signed-off-by: Andres Salomon <dilinger@xxxxxxxxxxxxxxx>
---
drivers/gpio/cs5535-gpio.c | 13 +++++--------
1 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index ec1f0e8..0fdbe94 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -134,8 +134,8 @@ static int chip_gpio_request(struct gpio_chip *c, unsigned offset)
/* check if this pin is available */
if ((mask & (1 << offset)) == 0) {
- printk(KERN_INFO DRV_NAME
- ": pin %u is not available (check mask)\n", offset);
+ dev_info(&chip->pdev->dev,
+ "pin %u is not available (check mask)\n", offset);
spin_unlock_irqrestore(&chip->lock, flags);
return -EINVAL;
}
@@ -265,18 +265,15 @@ static int __init cs5535_gpio_probe(struct pci_dev *pdev,
mask &= ~(1 << 28);
if (mask_orig != mask)
- printk(KERN_INFO DRV_NAME
- ": mask changed from 0x%08lX to 0x%08lX\n",
+ dev_info(&pdev->dev, "mask changed from 0x%08lX to 0x%08lX\n",
mask_orig, mask);
/* finally, register with the generic GPIO API */
err = gpiochip_add(&cs5535_gpio_chip.chip);
- if (err) {
- dev_err(&pdev->dev, "failed to register gpio chip\n");
+ if (err)
goto release_region;
- }
- printk(KERN_INFO DRV_NAME ": GPIO support successfully loaded.\n");
+ dev_info(&pdev->dev, DRV_NAME ": GPIO support successfully loaded.\n");
return 0;
release_region:
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/