Re: 2.6.31-rc5 regression: hd don't show up
From: Tim Blechmann
Date: Tue Sep 08 2009 - 16:59:33 EST
On 09/05/2009 02:12 AM, Tejun Heo wrote:
> Tim Blechmann wrote:
>>>>>>>> booting the machine today, one hd is missing again ... bootlog attached
>>>>>>> Hmmm... strange. I don't really see how it could be escaping. Can
>>>>>>> you please apply the attached patch? It still won't change the
>>>>>>> behavior but should be able to catch where it's escaping.
>>>>>> attached you find two bootlogs, for a correct boot, and with one hd
>>>>>> missing ...
>>>>> Heh heh, this is getting a bit embarrassing. Seems like I wasn't
>>>>> looking at the right path. Can you please try this one too? If it
>>>>> says "XXX D7 pulldown quick exit path" and then succeed to probe,
>>>>> that's the previous failure case so you don't need to keep trying to
>>>>> reproduce the problem.
>>>> i've attached the two boot logs again ...
>>> Okay, it was another wrong guess. Can you please try this one?
>>
>> unfortunately, i haven't been able to get a bootlog of a failure the
>> issue after rebooting like 20 times with yesterday's linus/master.
>> once i couldn't boot, since the root hd wasn't found, so i don't think,
>> the issue is solved, it just doesn't show very frequently ...
>>
>> the bootlog of a working system is attached, if i experience another
>> issue, i will send you another bootlog. since i am out of town for a few
>> days, it may take some time, though ...
>
> Alright, please keep me posted. Another possibility is that it's
> timing related and the PHY goes down briefly post-reset. I think I've
> found the code path but not sure yet and given how many times my hunch
> has been wrong on this case, not too confident either. Anyways, if
> it's timing related, too many printks could have thrown it off. If
> you can't reproduce the failure with the previous patch, please try
> this one and see whether it prints out "XXX: clearing to
> ATA_DEV_NONE" on failure.
with this patch, i could reproduce it again on the first boot. bootlog
attached.
cheers, tim
--
tim@xxxxxxxxxx
http://tim.klingt.org
/"\ ASCII Ribbon Campaign
\ / no HTML in email & vCards
X no proprietary attachments
/ \ use open standards
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc8 (tim@moka) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1~jaunty1) ) #22 SMP PREEMPT Sat Sep 5 10:20:57 CEST 2009
[ 0.000000] Command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] modified: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] modified: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf680000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf680000 page 4k
[ 0.000000] kernel direct mapping tables up to bf680000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 2M
[ 0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000
[ 0.000000] RAMDISK: 3783b000 - 37fef761
[ 0.000000] ACPI: RSDP 00000000000fabd0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf680100 0005C (v01 022609 XSDT1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf680290 000F4 (v03 022609 FACP1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf6804b0 0C3DD (v01 A1146 A1146001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf698000 00040
[ 0.000000] ACPI: APIC 00000000bf680390 000D8 (v01 022609 APIC1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf680470 0003C (v01 022609 OEMMCFG 20090226 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf698040 00072 (v01 022609 OEMB1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf68f4b0 00038 (v01 022609 OEMHPET 20090226 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf68f4f0 000B0 (v01 022609 OEMOSFR 20090226 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf69a8f0 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0002171520] TEXT DATA BSS ==> [0001000000 - 0002171520]
[ 0.000000] #3 [003783b000 - 0037fef761] RAMDISK ==> [003783b000 - 0037fef761]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0002172000 - 0002172288] BRK ==> [0002172000 - 0002172288]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 000001c000] PGTABLE ==> [0000013000 - 000001c000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800377fffff] on node 0
[ 0.000000] [ffffea0010800000-ffffea0011dfffff] PMD -> [ffff880038000000-ffff8800395fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf680
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143183
[ 0.000000] DMA zone: 88 pages used for memmap
[ 0.000000] DMA zone: 111 pages reserved
[ 0.000000] DMA zone: 3784 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 22440 pages used for memmap
[ 0.000000] DMA32 zone: 757464 pages, LIFO batch:31
[ 0.000000] Normal zone: 50688 pages used for memmap
[ 0.000000] Normal zone: 2308608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf680000 - 00000000bf698000
[ 0.000000] PM: Registered nosave memory: 00000000bf698000 - 00000000bf6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bf6dc000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages at ffff880028084000, static data 87684 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3069856
[ 0.000000] Kernel command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 12183548k/13631488k available (5211k kernel code, 1058756k absent, 388196k reserved, 2999k data, 516k init)
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2672.940 MHz processor.
[ 0.001532] Console: colour VGA+ 80x25
[ 0.001545] console [tty0] enabled
[ 0.001569] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.001571] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.001572] ... MAX_LOCK_DEPTH: 48
[ 0.001573] ... MAX_LOCKDEP_KEYS: 8191
[ 0.001574] ... CLASSHASH_SIZE: 4096
[ 0.001575] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.001576] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.001578] ... CHAINHASH_SIZE: 16384
[ 0.001579] memory used by lock dependency info: 5695 kB
[ 0.001580] per task-struct memory footprint: 1920 bytes
[ 0.021951] allocated 125829120 bytes of page_cgroup
[ 0.021954] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.022156] hpet clockevent registered
[ 0.022159] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.022171] Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.88 BogoMIPS (lpj=2672940)
[ 0.022291] Security Framework initialized
[ 0.022295] SELinux: Disabled at boot.
[ 0.022345] Mount-cache hash table entries: 256
[ 0.023270] Initializing cgroup subsys ns
[ 0.023273] Initializing cgroup subsys cpuacct
[ 0.023278] Initializing cgroup subsys memory
[ 0.023312] Initializing cgroup subsys freezer
[ 0.023329] CPU: Physical Processor ID: 0
[ 0.023331] CPU: Processor Core ID: 0
[ 0.023334] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.023335] CPU: L2 cache: 256K
[ 0.023337] CPU: L3 cache: 8192K
[ 0.023339] using mwait in idle threads.
[ 0.023340] Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
[ 0.023350] ... version: 3
[ 0.023351] ... bit width: 48
[ 0.023352] ... generic counters: 4
[ 0.023353] ... value mask: 0000ffffffffffff
[ 0.023354] ... max period: 000000007fffffff
[ 0.023356] ... fixed-purpose counters: 3
[ 0.023357] ... counter mask: 000000070000000f
[ 0.024183] ACPI: Core revision 20090521
[ 0.062658] Setting APIC routing to flat
[ 0.063136] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073137] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.178181] lockdep: fixing up alternatives.
[ 0.178304] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.188566] Initializing CPU#1
[ 0.249083] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336)
[ 0.249089] CPU: Physical Processor ID: 0
[ 0.249090] CPU: Processor Core ID: 1
[ 0.249092] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.249094] CPU: L2 cache: 256K
[ 0.249095] CPU: L3 cache: 8192K
[ 0.249556] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.249563] Skipping synchronization checks as TSC is reliable.
[ 0.250106] lockdep: fixing up alternatives.
[ 0.250131] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.260391] Initializing CPU#2
[ 0.322053] Calibrating delay using timer specific routine.. 5451.57 BogoMIPS (lpj=2725785)
[ 0.322061] CPU: Physical Processor ID: 0
[ 0.322062] CPU: Processor Core ID: 2
[ 0.322065] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.322066] CPU: L2 cache: 256K
[ 0.322067] CPU: L3 cache: 8192K
[ 0.322560] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.322567] Skipping synchronization checks as TSC is reliable.
[ 0.323072] lockdep: fixing up alternatives.
[ 0.323102] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.333361] Initializing CPU#3
[ 0.394021] Calibrating delay using timer specific routine.. 5344.66 BogoMIPS (lpj=2672334)
[ 0.394027] CPU: Physical Processor ID: 0
[ 0.394028] CPU: Processor Core ID: 3
[ 0.394030] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.394031] CPU: L2 cache: 256K
[ 0.394032] CPU: L3 cache: 8192K
[ 0.394442] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.394450] Skipping synchronization checks as TSC is reliable.
[ 0.395041] lockdep: fixing up alternatives.
[ 0.395068] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.405328] Initializing CPU#4
[ 0.465990] Calibrating delay using timer specific routine.. 5344.66 BogoMIPS (lpj=2672334)
[ 0.465998] CPU: Physical Processor ID: 0
[ 0.465999] CPU: Processor Core ID: 0
[ 0.466002] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.466004] CPU: L2 cache: 256K
[ 0.466005] CPU: L3 cache: 8192K
[ 0.466522] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.466530] Skipping synchronization checks as TSC is reliable.
[ 0.467010] lockdep: fixing up alternatives.
[ 0.467038] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.477298] Initializing CPU#5
[ 0.538959] Calibrating delay using timer specific routine.. 5451.57 BogoMIPS (lpj=2725785)
[ 0.538967] CPU: Physical Processor ID: 0
[ 0.538968] CPU: Processor Core ID: 1
[ 0.538970] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.538971] CPU: L2 cache: 256K
[ 0.538972] CPU: L3 cache: 8192K
[ 0.539453] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.539460] Skipping synchronization checks as TSC is reliable.
[ 0.539978] lockdep: fixing up alternatives.
[ 0.540007] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.550267] Initializing CPU#6
[ 0.610927] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
[ 0.610933] CPU: Physical Processor ID: 0
[ 0.610934] CPU: Processor Core ID: 2
[ 0.610935] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.610937] CPU: L2 cache: 256K
[ 0.610938] CPU: L3 cache: 8192K
[ 0.611446] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.611453] Skipping synchronization checks as TSC is reliable.
[ 0.611947] lockdep: fixing up alternatives.
[ 0.611974] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.622234] Initializing CPU#7
[ 0.682896] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
[ 0.682902] CPU: Physical Processor ID: 0
[ 0.682903] CPU: Processor Core ID: 3
[ 0.682904] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.682906] CPU: L2 cache: 256K
[ 0.682907] CPU: L3 cache: 8192K
[ 0.683413] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.683420] Skipping synchronization checks as TSC is reliable.
[ 0.683440] Brought up 8 CPUs
[ 0.683442] Total of 8 processors activated (42972.37 BogoMIPS).
[ 0.683551] CPU0 attaching sched-domain:
[ 0.683554] domain 0: span 0,4 level SIBLING
[ 0.683556] groups: 0 4
[ 0.683559] domain 1: span 0-7 level MC
[ 0.683561] groups: 0,4 1,5 2,6 3,7
[ 0.683579] CPU1 attaching sched-domain:
[ 0.683580] domain 0: span 1,5 level SIBLING
[ 0.683582] groups: 1 5
[ 0.683585] domain 1: span 0-7 level MC
[ 0.683586] groups: 1,5 2,6 3,7 0,4
[ 0.683592] CPU2 attaching sched-domain:
[ 0.683594] domain 0: span 2,6 level SIBLING
[ 0.683596] groups: 2 6
[ 0.683599] domain 1: span 0-7 level MC
[ 0.683600] groups: 2,6 3,7 0,4 1,5
[ 0.683606] CPU3 attaching sched-domain:
[ 0.683607] domain 0: span 3,7 level SIBLING
[ 0.683609] groups: 3 7
[ 0.683612] domain 1: span 0-7 level MC
[ 0.683614] groups: 3,7 0,4 1,5 2,6
[ 0.683619] CPU4 attaching sched-domain:
[ 0.683621] domain 0: span 0,4 level SIBLING
[ 0.683623] groups: 4 0
[ 0.683625] domain 1: span 0-7 level MC
[ 0.683627] groups: 0,4 1,5 2,6 3,7
[ 0.683633] CPU5 attaching sched-domain:
[ 0.683634] domain 0: span 1,5 level SIBLING
[ 0.683636] groups: 5 1
[ 0.683639] domain 1: span 0-7 level MC
[ 0.683641] groups: 1,5 2,6 3,7 0,4
[ 0.683646] CPU6 attaching sched-domain:
[ 0.683648] domain 0: span 2,6 level SIBLING
[ 0.683649] groups: 6 2
[ 0.683652] domain 1: span 0-7 level MC
[ 0.683654] groups: 2,6 3,7 0,4 1,5
[ 0.683660] CPU7 attaching sched-domain:
[ 0.683661] domain 0: span 3,7 level SIBLING
[ 0.683663] groups: 7 3
[ 0.683666] domain 1: span 0-7 level MC
[ 0.683667] groups: 3,7 0,4 1,5 2,6
[ 0.684425] Booting paravirtualized kernel on bare hardware
[ 0.684684] regulator: core version 0.5
[ 0.684709] Time: 20:41:59 Date: 09/08/09
[ 0.684891] NET: Registered protocol family 16
[ 0.685320] ACPI: bus type pci registered
[ 0.685426] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.685429] PCI: Not using MMCONFIG.
[ 0.685430] PCI: Using configuration type 1 for base access
[ 0.687037] bio: create slab <bio-0> at 0
[ 0.689703] ACPI: EC: Look up EC in DSDT
[ 0.728679] ACPI: Interpreter enabled
[ 0.728683] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.728730] ACPI: Using IOAPIC for interrupt routing
[ 0.728794] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.731561] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.733074] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.745261] ACPI Warning: Incorrect checksum in table [OEMB] - 8B, should be 83 20090521 tbutils-246
[ 0.745521] ACPI: No dock devices found.
[ 0.745679] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.745903] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.745907] pci 0000:00:00.0: PME# disabled
[ 0.745977] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.745981] pci 0000:00:01.0: PME# disabled
[ 0.746052] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.746056] pci 0000:00:03.0: PME# disabled
[ 0.746129] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.746132] pci 0000:00:07.0: PME# disabled
[ 0.746543] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
[ 0.746622] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[ 0.746701] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
[ 0.746785] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff]
[ 0.746846] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.746851] pci 0000:00:1a.7: PME# disabled
[ 0.746900] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff]
[ 0.746948] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.746952] pci 0000:00:1b.0: PME# disabled
[ 0.747017] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.747020] pci 0000:00:1c.0: PME# disabled
[ 0.747092] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.747096] pci 0000:00:1c.2: PME# disabled
[ 0.747162] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
[ 0.747242] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.747322] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
[ 0.747409] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff]
[ 0.747470] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.747475] pci 0000:00:1d.7: PME# disabled
[ 0.747611] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.747614] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.747618] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.747623] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 0.747683] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
[ 0.747688] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
[ 0.747694] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
[ 0.747700] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[ 0.747706] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
[ 0.747712] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
[ 0.747766] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff]
[ 0.747781] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.747831] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
[ 0.747837] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
[ 0.747843] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
[ 0.747849] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
[ 0.747855] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[ 0.747860] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[ 0.747986] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.747996] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.748006] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.748012] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.748017] pci 0000:02:00.0: reg 30 32bit mmio: [0xfb480000-0xfb4fffff]
[ 0.748095] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[ 0.748098] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb4fffff]
[ 0.748104] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.748221] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff]
[ 0.748273] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.748294] pci 0000:04:00.0: reg 18 64bit mmio: [0xfb5ff000-0xfb5fffff]
[ 0.748309] pci 0000:04:00.0: reg 20 64bit mmio: [0xf4ef0000-0xf4efffff]
[ 0.748317] pci 0000:04:00.0: reg 30 32bit mmio: [0xfb5c0000-0xfb5dffff]
[ 0.748361] pci 0000:04:00.0: supports D1 D2
[ 0.748363] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.748367] pci 0000:04:00.0: PME# disabled
[ 0.748444] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.748448] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb500000-0xfb5fffff]
[ 0.748454] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4e00000-0xf4efffff]
[ 0.748494] pci 0000:06:00.0: reg 10 32bit mmio: [0xfb6f8000-0xfb6fffff]
[ 0.748584] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.748605] pci 0000:06:01.0: supports D1 D2
[ 0.748607] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.748611] pci 0000:06:01.0: PME# disabled
[ 0.748674] pci 0000:00:1e.0: transparent bridge
[ 0.748678] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.748682] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb600000-0xfbefffff]
[ 0.748688] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf5000000-0xf6ffffff]
[ 0.748737] pci_bus 0000:00: on NUMA node 0
[ 0.748743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.749172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.749323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.749399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.749482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 0.749548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 0.749614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 0.784338] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.784480] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.784611] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.784745] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.784883] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.785032] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.785165] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.785298] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.785630] SCSI subsystem initialized
[ 0.785823] libata version 3.00 loaded.
[ 0.785926] usbcore: registered new interface driver usbfs
[ 0.785947] usbcore: registered new interface driver hub
[ 0.785978] usbcore: registered new device driver usb
[ 0.786162] ACPI: WMI: Mapper loaded
[ 0.786163] PCI: Using ACPI for IRQ routing
[ 0.795418] Bluetooth: Core ver 2.15
[ 0.795453] NET: Registered protocol family 31
[ 0.795455] Bluetooth: HCI device and connection manager initialized
[ 0.795474] Bluetooth: HCI socket layer initialized
[ 0.795476] NET: Registered protocol family 8
[ 0.795477] NET: Registered protocol family 20
[ 0.795494] NetLabel: Initializing
[ 0.795496] NetLabel: domain hash size = 128
[ 0.795497] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.795537] NetLabel: unlabeled traffic allowed by default
[ 0.795792] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.795797] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.803927] Switched to high resolution mode on CPU 0
[ 0.804316] Switched to high resolution mode on CPU 3
[ 0.804321] Switched to high resolution mode on CPU 2
[ 0.804328] Switched to high resolution mode on CPU 1
[ 0.804386] Switched to high resolution mode on CPU 7
[ 0.804387] Switched to high resolution mode on CPU 6
[ 0.804388] Switched to high resolution mode on CPU 5
[ 0.804396] Switched to high resolution mode on CPU 4
[ 0.818153] pnp: PnP ACPI init
[ 0.818190] ACPI: bus type pnp registered
[ 0.821858] pnp: PnP ACPI: found 15 devices
[ 0.821861] ACPI: ACPI bus type pnp unregistered
[ 0.821874] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 0.821876] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 0.821879] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 0.821881] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 0.821884] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
[ 0.821888] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 0.821899] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.821906] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.821908] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.821911] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.821913] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.821916] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.821918] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.821926] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.821933] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.821935] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.821942] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.821950] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.821953] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.821955] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.821958] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved
[ 0.821960] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.826782] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.826784] pci 0000:00:01.0: IO window: disabled
[ 0.826788] pci 0000:00:01.0: MEM window: disabled
[ 0.826792] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.826795] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.826798] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 0.826802] pci 0000:00:03.0: MEM window: 0xf8000000-0xfb4fffff
[ 0.826806] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.826812] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.826813] pci 0000:00:07.0: IO window: disabled
[ 0.826817] pci 0000:00:07.0: MEM window: disabled
[ 0.826820] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.826824] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.826825] pci 0000:00:1c.0: IO window: disabled
[ 0.826829] pci 0000:00:1c.0: MEM window: disabled
[ 0.826833] pci 0000:00:1c.0: PREFETCH window: 0x000000f4f00000-0x000000f4ffffff
[ 0.826839] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.826842] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.826846] pci 0000:00:1c.2: MEM window: 0xfb500000-0xfb5fffff
[ 0.826850] pci 0000:00:1c.2: PREFETCH window: 0x000000f4e00000-0x000000f4efffff
[ 0.826864] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07
[ 0.826865] pci 0000:06:01.0: IO window: 0x00e000-0x00e0ff
[ 0.826870] pci 0000:06:01.0: IO window: 0x00e400-0x00e4ff
[ 0.826874] pci 0000:06:01.0: PREFETCH window: 0xc0000000-0xc3ffffff
[ 0.826878] pci 0000:06:01.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.826883] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.826887] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.826892] pci 0000:00:1e.0: MEM window: 0xfb600000-0xfbefffff
[ 0.826896] pci 0000:00:1e.0: PREFETCH window: 0x000000f5000000-0x000000f6ffffff
[ 0.826909] pci 0000:00:01.0: setting latency timer to 64
[ 0.826917] pci 0000:00:03.0: setting latency timer to 64
[ 0.826924] pci 0000:00:07.0: setting latency timer to 64
[ 0.826936] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.826940] pci 0000:00:1c.0: setting latency timer to 64
[ 0.826949] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.826953] pci 0000:00:1c.2: setting latency timer to 64
[ 0.826959] pci 0000:00:1e.0: setting latency timer to 64
[ 0.826967] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.826973] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.826975] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.826977] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.826979] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb4fffff]
[ 0.826980] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.826982] pci_bus 0000:05: resource 2 pref mem [0xf4f00000-0xf4ffffff]
[ 0.826984] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.826986] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff]
[ 0.826988] pci_bus 0000:04: resource 2 pref mem [0xf4e00000-0xf4efffff]
[ 0.826990] pci_bus 0000:06: resource 0 io: [0xe000-0xefff]
[ 0.826991] pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfbefffff]
[ 0.826993] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf6ffffff]
[ 0.826995] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.826996] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.826998] pci_bus 0000:07: resource 0 io: [0xe000-0xe0ff]
[ 0.827000] pci_bus 0000:07: resource 1 io: [0xe400-0xe4ff]
[ 0.827002] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.827003] pci_bus 0000:07: resource 3 mem: [0xc4000000-0xc7ffffff]
[ 0.827119] NET: Registered protocol family 2
[ 0.827347] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.828397] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.829023] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.833029] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.833052] TCP reno registered
[ 0.833278] NET: Registered protocol family 1
[ 0.833480] Trying to unpack rootfs image as initramfs...
[ 0.973211] Freeing initrd memory: 7889k freed
[ 0.975091] Scanning for low memory corruption every 60 seconds
[ 0.975352] audit: initializing netlink socket (disabled)
[ 0.975387] type=2000 audit(1252442518.817:1): initialized
[ 0.979309] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.979703] VFS: Disk quotas dquot_6.5.2
[ 0.979769] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.980705] fuse init (API version 7.12)
[ 0.980770] msgmni has been set to 23813
[ 0.981370] alg: No test for stdrng (krng)
[ 0.981417] io scheduler noop registered
[ 0.981419] io scheduler anticipatory registered
[ 0.981421] io scheduler deadline registered
[ 0.981459] io scheduler cfq registered (default)
[ 0.981618] pci 0000:02:00.0: Boot video device
[ 0.981833] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X
[ 0.981842] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.981982] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
[ 0.981990] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.982131] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X
[ 0.982139] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 0.982272] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 0.982280] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.982426] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 0.982434] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.982542] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.982561] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.982571] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.982583] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.982725] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.982965] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.982969] ACPI: Power Button [PWRF]
[ 0.983051] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.983054] ACPI: Power Button [PWRB]
[ 0.984113] ACPI: SSDT 00000000bf6980c0 00403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.984966] ACPI: SSDT 00000000bf69a140 003B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.987889] Monitor-Mwait will be used to enter C-1 state
[ 0.987929] Monitor-Mwait will be used to enter C-2 state
[ 0.987971] Monitor-Mwait will be used to enter C-3 state
[ 0.988113] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.988245] processor LNXCPU:00: registered as cooling_device0
[ 0.988789] ACPI: SSDT 00000000bf6984d0 00403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.989592] ACPI: SSDT 00000000bf69a500 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
[ 0.992547] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.992580] processor LNXCPU:01: registered as cooling_device1
[ 0.993131] ACPI: SSDT 00000000bf6988e0 00403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.993933] ACPI: SSDT 00000000bf69a590 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
[ 0.996892] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 0.996926] processor LNXCPU:02: registered as cooling_device2
[ 0.997475] ACPI: SSDT 00000000bf698cf0 00403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.998287] ACPI: SSDT 00000000bf69a620 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
[ 1.001245] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 1.001286] processor LNXCPU:03: registered as cooling_device3
[ 1.001831] ACPI: SSDT 00000000bf699100 00403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
[ 1.002641] ACPI: SSDT 00000000bf69a6b0 00085 (v01 PmRef P005Cst 00003000 INTL 20060113)
[ 1.005613] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[ 1.005647] processor LNXCPU:04: registered as cooling_device4
[ 1.006200] ACPI: SSDT 00000000bf699510 00403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
[ 1.007014] ACPI: SSDT 00000000bf69a740 00085 (v01 PmRef P006Cst 00003000 INTL 20060113)
[ 1.009964] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[ 1.009999] processor LNXCPU:05: registered as cooling_device5
[ 1.010553] ACPI: SSDT 00000000bf699920 00403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
[ 1.011370] ACPI: SSDT 00000000bf69a7d0 00085 (v01 PmRef P007Cst 00003000 INTL 20060113)
[ 1.014327] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[ 1.014366] processor LNXCPU:06: registered as cooling_device6
[ 1.014916] ACPI: SSDT 00000000bf699d30 00403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
[ 1.015738] ACPI: SSDT 00000000bf69a860 00085 (v01 PmRef P008Cst 00003000 INTL 20060113)
[ 1.018693] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[ 1.018729] processor LNXCPU:07: registered as cooling_device7
[ 1.021919] XENFS: not registering filesystem on non-xen platform
[ 1.023665] Linux agpgart interface v0.103
[ 1.023669] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.025725] brd: module loaded
[ 1.026436] loop: module loaded
[ 1.026530] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.026714] ata_piix 0000:00:1f.2: version 2.13
[ 1.026732] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.026737] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.026789] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.026869] scsi0 : ata_piix
[ 1.027171] scsi1 : ata_piix
[ 1.028987] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20
[ 1.028992] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20
[ 1.029016] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.029020] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.029060] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.029117] scsi2 : ata_piix
[ 1.029189] scsi3 : ata_piix
[ 1.030950] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20
[ 1.030954] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20
[ 1.032066] Fixed MDIO Bus: probed
[ 1.032070] PPP generic driver version 2.4.2
[ 1.032298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.032322] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.032334] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.032337] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.033140] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.037067] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.037073] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.037092] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
[ 1.045864] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.046302] usb usb1: configuration #1 chosen from 1 choice
[ 1.046495] hub 1-0:1.0: USB hub found
[ 1.046521] hub 1-0:1.0: 6 ports detected
[ 1.046823] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.046835] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.046839] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.046945] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.050855] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.050860] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.050875] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
[ 1.059839] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.059961] usb usb2: configuration #1 chosen from 1 choice
[ 1.059999] hub 2-0:1.0: USB hub found
[ 1.060007] hub 2-0:1.0: 6 ports detected
[ 1.060115] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.060140] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.060179] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.060185] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.060188] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.060261] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.060294] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 1.060413] usb usb3: configuration #1 chosen from 1 choice
[ 1.060452] hub 3-0:1.0: USB hub found
[ 1.060496] hub 3-0:1.0: 2 ports detected
[ 1.060596] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.060602] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.060604] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.060657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.060690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.060794] usb usb4: configuration #1 chosen from 1 choice
[ 1.060837] hub 4-0:1.0: USB hub found
[ 1.060845] hub 4-0:1.0: 2 ports detected
[ 1.060928] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.060934] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.060937] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.060991] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.061024] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[ 1.061132] usb usb5: configuration #1 chosen from 1 choice
[ 1.061170] hub 5-0:1.0: USB hub found
[ 1.061177] hub 5-0:1.0: 2 ports detected
[ 1.061255] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.061261] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.061264] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.061317] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.061342] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.061443] usb usb6: configuration #1 chosen from 1 choice
[ 1.061480] hub 6-0:1.0: USB hub found
[ 1.061487] hub 6-0:1.0: 2 ports detected
[ 1.061561] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.061566] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.061569] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.061624] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.061647] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.061771] usb usb7: configuration #1 chosen from 1 choice
[ 1.061809] hub 7-0:1.0: USB hub found
[ 1.061844] hub 7-0:1.0: 2 ports detected
[ 1.061923] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.061929] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.061932] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.061984] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.062008] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.062116] usb usb8: configuration #1 chosen from 1 choice
[ 1.062155] hub 8-0:1.0: USB hub found
[ 1.062162] hub 8-0:1.0: 2 ports detected
[ 1.062305] PNP: No PS/2 controller found. Probing ports directly.
[ 1.064850] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.064879] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.065258] mice: PS/2 mouse device common for all mice
[ 1.065385] rtc_cmos 00:03: RTC can wake from S4
[ 1.065594] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.065621] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.065762] device-mapper: uevent: version 1.0.3
[ 1.065867] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 1.066074] device-mapper: multipath: version 1.1.0 loaded
[ 1.066103] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.066952] cpuidle: using governor ladder
[ 1.067675] cpuidle: using governor menu
[ 1.068364] TCP cubic registered
[ 1.068725] NET: Registered protocol family 10
[ 1.069901] lo: Disabled Privacy Extensions
[ 1.070571] NET: Registered protocol family 17
[ 1.070635] Bluetooth: L2CAP ver 2.13
[ 1.070637] Bluetooth: L2CAP socket layer initialized
[ 1.070640] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.070641] Bluetooth: SCO socket layer initialized
[ 1.070869] Bluetooth: RFCOMM TTY layer initialized
[ 1.070872] Bluetooth: RFCOMM socket layer initialized
[ 1.070873] Bluetooth: RFCOMM ver 1.11
[ 1.079334] PM: Resume from disk failed.
[ 1.079351] registered taskstats version 1
[ 1.079541] Magic number: 9:872:699
[ 1.079590] processor LNXCPU:0d: hash matches
[ 1.079746] rtc_cmos 00:03: setting system clock to 2009-09-08 20:41:59 UTC (1252442519)
[ 1.079750] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.079752] EDD information not available.
[ 1.345906] ata3.00: XXX clearing to ATA_DEV_NONE
[ 1.357745] ata3: SATA link down (SStatus 0 SControl 301)
[ 1.496892] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.516485] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 1.516489] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.520242] ata4.00: configured for UDMA/133
[ 1.553852] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.720314] usb 3-1: configuration #1 chosen from 1 choice
[ 1.789826] ata2.01: XXX clearing to ATA_DEV_NONE
[ 1.789856] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.789868] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.790119] ata1.01: XXX clearing to ATA_DEV_NONE
[ 1.790148] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.790158] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.793232] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
[ 1.799123] ata1.00: configured for UDMA/100
[ 1.801057] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5
[ 1.805648] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.805653] Uniform CD-ROM driver Revision: 3.20
[ 1.805947] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.806290] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.809351] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[ 1.809356] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.828408] ata2.00: configured for UDMA/133
[ 1.828532] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.828933] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.828970] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.829028] sd 1:0:0:0: [sda] Write Protect is off
[ 1.829030] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.829058] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.829072] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 1.829222] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.829276] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.829278] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.829306] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.829414] sda:
[ 1.829656] sdb:
[ 1.829882] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.839364] sda1 sda2 < sda5 >
[ 1.862279] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.892645] sdb1
[ 1.893000] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.893232] Freeing unused kernel memory: 516k freed
[ 1.893305] Write protecting the kernel read-only data: 7336k
[ 1.972796] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.078526] Floppy drive(s): fd0 is 1.44M
[ 2.093539] FDC 0 is a post-1991 82077
[ 2.094965] usbcore: registered new interface driver hiddev
[ 2.097279] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.097302] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.097342] r8169 0000:04:00.0: setting latency timer to 64
[ 2.097405] r8169 0000:04:00.0: irq 53 for MSI/MSI-X
[ 2.098641] eth0: RTL8168c/8111c at 0xffffc90000022000, 00:24:8c:a7:6e:2d, XID 3c4000c0 IRQ 53
[ 2.115268] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 2.115832] generic-usb 0003:046A:002F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input0
[ 2.135114] usb 3-2: configuration #1 chosen from 1 choice
[ 2.141183] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 2.141322] generic-usb 0003:046A:002F.0002: input,hidraw1: USB HID v1.11 Mouse [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input1
[ 2.153164] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 2.153259] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 2.153281] usbcore: registered new interface driver usbhid
[ 2.153285] usbhid: v2.6:USB HID core driver
[ 2.457977] PM: Starting manual resume from disk
[ 2.457987] PM: Resume from partition 8:5
[ 2.457988] PM: Checking hibernation image.
[ 2.458337] PM: Resume from disk failed.
[ 2.495433] EXT4-fs (sda1): barriers enabled
[ 2.517146] kjournald2 starting: pid 985, dev sda1:8, commit interval 5 seconds
[ 2.517209] EXT4-fs (sda1): delayed allocation enabled
[ 2.517213] EXT4-fs: file extents enabled
[ 2.555747] EXT4-fs: mballoc enabled
[ 2.555803] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.869237] udev: starting version 141
[ 6.710675] nvidia: module license 'NVIDIA' taints kernel.
[ 6.710678] Disabling lock debugging due to kernel taint
[ 6.847071] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.857011] iTCO_vendor_support: vendor-support=0
[ 6.864835] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 6.864935] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 6.865092] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.884367] yenta_cardbus 0000:06:01.0: CardBus bridge found [1524:1410]
[ 6.884387] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI
[ 6.884390] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI
[ 6.884395] yenta_cardbus 0000:06:01.0: TI: mfunc 0x00001002, devctl 0x44
[ 6.933522] cfg80211: Calling CRDA to update world regulatory domain
[ 6.967030] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 6.967037] nvidia 0000:02:00.0: setting latency timer to 64
[ 6.967116] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18.03 Fri Jul 31 21:54:40 PDT 2009
[ 7.014731] cfg80211: World regulatory domain updated:
[ 7.014733] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.014735] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.014737] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.014739] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.014740] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.014742] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.107192] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0000, PCI irq 17
[ 7.107196] yenta_cardbus 0000:06:01.0: Socket status: 30000020
[ 7.107199] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 7.107207] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 7.107210] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff
[ 7.107212] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xf5000000 - 0xf6ffffff
[ 7.156768] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.268506] phy0: Selected rate control algorithm 'minstrel'
[ 7.269218] Registered led device: rt61pci-phy0::radio
[ 7.269334] Registered led device: rt61pci-phy0::assoc
[ 7.313484] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.313511] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.364816] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS...
[ 7.731251] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 7.731284] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 7.731359] yenta_cardbus 0000:06:01.0: EnE: chaning testregister 0xC9, 0e -> 0c
[ 7.764101] RME Hammerfall DSP 0000:07:00.0: enabling device (0000 -> 0002)
[ 7.764115] RME Hammerfall DSP 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.637696] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
[ 10.637802] RME Hammerfall DSP 0000:07:00.0: firmware: requesting multiface_firmware_rev11.bin
[ 10.684999] Hammerfall-DSP: loading firmware
[ 13.985656] Hammerfall-DSP: finished firmware loading
[ 14.112233] lp: driver loaded but no devices found
[ 14.278190] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
[ 14.819448] EXT4-fs (sda1): internal journal on sda1:8
[ 15.894176] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.910490] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 15.910751] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 15.910753] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 15.910754] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 15.980794] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.023839] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.023843] Bluetooth: BNEP filters: protocol multicast
[ 21.054756] Bridge firewalling registered
[ 22.132365] ppdev: user-space parallel port driver
[ 26.572994] r8169: eth0: link down
[ 26.574169] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.574717] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin
[ 26.640856] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 44.998726] wlan0: authenticate with AP 00:24:fe:09:94:18
[ 45.000503] wlan0: authenticated
[ 45.000507] wlan0: associate with AP 00:24:fe:09:94:18
[ 45.003162] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=1)
[ 45.003167] wlan0: associated
[ 45.004620] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 55.788820] wlan0: no IPv6 routers present
Attachment:
signature.asc
Description: OpenPGP digital signature