[PATCH 7/7 RFC] spi-imx: strip down chipselect function to only drive the chipselect

[Uwe Kleine-KÃnig]

spi_imx_chipselect() made things that should be (and mostly are) done by
spi_imx_setupxfer.  Only setting the tx and rx functions was missing.

Signed-off-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
---
 drivers/spi/spi_imx.c |   50 ++++++++++++++++--------------------------------
 1 files changed, 17 insertions(+), 33 deletions(-)

diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 2fec117..89c22ef 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -354,43 +354,14 @@ static int mx1_rx_available(struct spi_imx_data *spi_imx)
 static void spi_imx_chipselect(struct spi_device *spi, int is_active)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
-	unsigned int cs = 0;
 	int gpio = spi_imx->chipselect[spi->chip_select];
-	struct spi_imx_config config;
-
-	if (spi->mode & SPI_CS_HIGH)
-		cs = 1;
+	int active = is_active != BITBANG_CS_INACTIVE;
+	int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
 
-	if (is_active == BITBANG_CS_INACTIVE) {
-		if (gpio >= 0)
-			gpio_set_value(gpio, !cs);
+	if (gpio < 0)
 		return;
-	}
-
-	config.bpw = spi->bits_per_word;
-	config.speed_hz = spi->max_speed_hz;
-	config.mode = spi->mode;
-	config.cs = spi_imx->chipselect[spi->chip_select];
-
-	spi_imx->config(spi_imx, &config);
-
-	/* Initialize the functions for transfer */
-	if (config.bpw <= 8) {
-		spi_imx->rx = spi_imx_buf_rx_u8;
-		spi_imx->tx = spi_imx_buf_tx_u8;
-	} else if (config.bpw <= 16) {
-		spi_imx->rx = spi_imx_buf_rx_u16;
-		spi_imx->tx = spi_imx_buf_tx_u16;
-	} else if (config.bpw <= 32) {
-		spi_imx->rx = spi_imx_buf_rx_u32;
-		spi_imx->tx = spi_imx_buf_tx_u32;
-	} else
-		BUG();
-
-	if (gpio >= 0)
-		gpio_set_value(gpio, cs);
 
-	return;
+	gpio_set_value(gpio, dev_is_lowactive ^ active);
 }
 
 static void spi_imx_push(struct spi_imx_data *spi_imx)
@@ -451,6 +422,19 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	if (!config.speed_hz)
 		config.speed_hz = spi->max_speed_hz;
 
+	/* Initialize the functions for transfer */
+	if (config.bpw <= 8) {
+		spi_imx->rx = spi_imx_buf_rx_u8;
+		spi_imx->tx = spi_imx_buf_tx_u8;
+	} else if (config.bpw <= 16) {
+		spi_imx->rx = spi_imx_buf_rx_u16;
+		spi_imx->tx = spi_imx_buf_tx_u16;
+	} else if (config.bpw <= 32) {
+		spi_imx->rx = spi_imx_buf_rx_u32;
+		spi_imx->tx = spi_imx_buf_tx_u32;
+	} else
+		BUG();
+
 	spi_imx->config(spi_imx, &config);
 
 	return 0;
-- 
1.6.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/