Re: [PATCH 2/2] LIS3LV02D: I2C support

[Ãric Piel]

Op 01-10-09 12:06, Samu Onkalo schreef:
> I2C bus support for lis3lv02d and variant accelerometer chips
> 
Looks very good in general. Just a few comments.

> Signed-off-by: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
> ---
>  drivers/hwmon/Kconfig         |   17 ++++
>  drivers/hwmon/Makefile        |    1 +
>  drivers/hwmon/lis3lv02d_i2c.c |  183 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 201 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/hwmon/lis3lv02d_i2c.c
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 69222bc..3d8e1b7 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -992,6 +992,23 @@ config SENSORS_LIS3_SPI
>  	  will be called lis3lv02d and a specific module for the SPI transport
>  	  is called lis3lv02d_spi.
>  

You put the config just after SPI, but SPI had a "!ACPI" which allowed
it to look no too weird compared to the option for ACPI/HP. In your
case, some people will see both LIS3_I2C and LIS3LV02D and it will start
to look really messy. Ok, not too much a big deal, but I think
eventually it would be better to have an generic option for lis3, and
sub-options for ACPI/HP, SPI, and IÂC. So unless someone complains, I
propose you let it like this, and I'll send later on a patch which merge
the three options together.
> +config SENSORS_LIS3_I2C
> +	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
> +	depends on I2C && INPUT
> +	select INPUT_POLLDEV
> +	default n
> +	help
> +	  This driver provides support for the LIS3LV02Dx accelerometer connected
> +	  via I2C. The accelerometer data is readable via
> +	  /sys/devices/platform/lis3lv02d.
> +
> +	  This driver also provides an absolute input class device, allowing
> +	  the device to act as a pinball machine-esque joystick.
> +
> +	  This driver can also be built as modules.  If so, the core module
> +	  will be called lis3lv02d and a specific module for the I2C transport
> +	  is called lis3lv02d_I2C.
You meant "lis3lv02d_i2c", right?


> +
>  config SENSORS_APPLESMC
>  	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
>  	depends on INPUT && X86
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 4a34375..699e372 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_SENSORS_IT87)	+= it87.o
>  obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
>  obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
>  obj-$(CONFIG_SENSORS_LIS3_SPI)	+= lis3lv02d.o lis3lv02d_spi.o
> +obj-$(CONFIG_SENSORS_LIS3_I2C)	+= lis3lv02d.o lis3lv02d_i2c.o
>  obj-$(CONFIG_SENSORS_LM63)	+= lm63.o
>  obj-$(CONFIG_SENSORS_LM70)	+= lm70.o
>  obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
> diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
> new file mode 100644
> index 0000000..344b240
> --- /dev/null
> +++ b/drivers/hwmon/lis3lv02d_i2c.c
> @@ -0,0 +1,183 @@
> +/*
> + * drivers/hwmon/lis3lv02d_i2c.c
> + *
> + * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer.
> + * Driver is based on corresponding SPI driver written by Daniel Mack
> + * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@xxxxxxxx> ).
> + *
> + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
> + *
> + * Contact: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include "lis3lv02d.h"
> +
> +#define DRV_NAME 	"lis3lv02d_i2c"
> +
> +static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value)
> +{
> +	struct i2c_client *c = lis3->bus_priv;
> +	return i2c_smbus_write_byte_data(c, reg, value);
> +}
> +
> +static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v)
> +{
> +	struct i2c_client *c = lis3->bus_priv;
> +	*v = i2c_smbus_read_byte_data(c, reg);
> +	return 0;
> +}
> +
> +static int lis3_i2c_init(struct lis3lv02d *lis3)
> +{
> +	u8 reg;
> +	int ret;
> +
> +	/* power up the device */
> +	ret = lis3->read(lis3, CTRL_REG1, &reg);
> +	if (ret < 0)
> +		return ret;
> +
> +	reg |= CTRL1_PD0;
> +	return lis3->write(lis3, CTRL_REG1, reg);
> +}
> +
> +static struct axis_conversion lis3lv02d_axis_map = { 1, 2, 3 };
Could you add a comment like:
/* Default axis mapping, but it will be overridden by platform data */


> +
> +static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
> +					const struct i2c_device_id *id)
> +{
> +	int ret = 0;
> +	struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
> +
> +	if (pdata) {
> +		if (pdata->axis_x)
> +			lis3lv02d_axis_map.x = pdata->axis_x;
> +
> +		if (pdata->axis_y)
> +			lis3lv02d_axis_map.y = pdata->axis_y;
> +
> +		if (pdata->axis_z)
> +			lis3lv02d_axis_map.z = pdata->axis_z;
> +
> +		lis3_dev.irq2 = pdata->irq2;
Could you explain what is irq2 used for in the lis3 ship?
And where in your code is it used? If you are not using it in this set
of patches, it would be better to drop it completely. You'll bring it
back when you actually use it :-)

> +
> +		if (pdata->setup_resources)
> +			ret = pdata->setup_resources();
> +
> +		if (ret)
> +			goto fail;
> +	}
> +
> +	lis3_dev.pdata	  = pdata;
> +	lis3_dev.bus_priv = client;
> +	lis3_dev.init	  = lis3_i2c_init;
> +	lis3_dev.read	  = lis3_i2c_read;
> +	lis3_dev.write	  = lis3_i2c_write;
> +	lis3_dev.irq	  = client->irq;
> +	lis3_dev.ac	  = lis3lv02d_axis_map;
> +
> +	i2c_set_clientdata(client, &lis3_dev);
> +	ret = lis3lv02d_init_device(&lis3_dev);
> +fail:
> +	return ret;
> +}
> +
> +static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
> +{
> +	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
> +	struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
> +
> +	if (pdata && pdata->release_resources)
> +		pdata->release_resources();
> +
> +	lis3lv02d_joystick_disable();
> +	lis3lv02d_poweroff(lis3);
> +
> +	return lis3lv02d_remove_fs(&lis3_dev);
> +}
> +
> +#ifdef CONFIG_PM
> +static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
> +{
> +	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
> +
> +	if (!lis3->pdata->wakeup_flags)
> +		lis3lv02d_poweroff(lis3);
> +	return 0;
> +}
> +
> +static int lis3lv02d_i2c_resume(struct i2c_client *client)
> +{
> +	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
> +
> +	if (!lis3->pdata->wakeup_flags)
> +		lis3lv02d_poweron(lis3);
> +	return 0;
> +}
> +
> +static void lis3lv02d_i2c_shutdown(struct i2c_client *client)
> +{
> +	lis3lv02d_i2c_suspend(client, PMSG_SUSPEND);
> +}
> +#else
> +#define lis3lv02d_i2c_suspend	NULL
> +#define lis3lv02d_i2c_resume	NULL
> +#define lis3lv02d_i2c_shutdown	NULL
> +#endif
> +
> +static const struct i2c_device_id lis3lv02d_id[] = {
> +	{"lis3lv02d", 0 },
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
> +
> +static struct i2c_driver lis3lv02d_i2c_driver = {
> +	.driver	 = {
> +		.name   = DRV_NAME,
> +		.owner  = THIS_MODULE,
> +	},
> +	.suspend = lis3lv02d_i2c_suspend,
> +	.shutdown = lis3lv02d_i2c_shutdown,
> +	.resume = lis3lv02d_i2c_resume,
> +	.probe	= lis3lv02d_i2c_probe,
> +	.remove	= __devexit_p(lis3lv02d_i2c_remove),
> +	.id_table = lis3lv02d_id,
> +};
> +
> +static int __init lis3lv02d_init(void)
> +{
> +	return i2c_add_driver(&lis3lv02d_i2c_driver);
> +}
> +
> +static void __exit lis3lv02d_exit(void)
> +{
> +	i2c_del_driver(&lis3lv02d_i2c_driver);
> +}
> +
> +MODULE_AUTHOR("Nokia Corporation");
> +MODULE_DESCRIPTION("lis3lv02d I2C interface");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("i2c:" DRV_NAME);
> +
> +module_init(lis3lv02d_init);
> +module_exit(lis3lv02d_exit);


Eric
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/