Re: [PATCH] asus_atk0110: add support for Asus P7P55D
From: Luca Tettamanti
Date: Fri Oct 02 2009 - 08:26:49 EST
On Thu, Oct 01, 2009 at 09:05:36PM +0200, Luca Tettamanti wrote:
> On Thu, Oct 1, 2009 at 6:21 PM, Thomas Backlund <tmb@xxxxxxxxxxxx> wrote:
> > Luca Tettamanti wrote:
> >>
> >> On Thu, Oct 01, 2009 at 08:40:59AM -0600, Robert Hancock wrote:
> >>>
> >>> On Thu, Oct 1, 2009 at 12:50 AM, Jean Delvare <khali@xxxxxxxxxxxx> wrote:
> >>>>
> >>>> On Wed, 30 Sep 2009 17:38:21 -0600, Robert Hancock wrote:
> >>>>>
> >>>>> On Tue, Sep 29, 2009 at 8:49 AM, Thomas Backlund <tmb@xxxxxxxxxxxx>
> >>>>> wrote:
> >>>>>>
> >>>>>> Try this one:
> >>>>>> http://marc.info/?l=linux-kernel&m=125421276407283&w=2
> >>>>>
> >>>>> With that patch it's lasted almost a day with no timeouts, previously
> >>>>> I was getting about one every hour. Has that patch been submitted?
> >>>>
> >>>> Do you mean you're still getting timeouts but they are less frequent,
> >>>> or you did not get any timeout at all so far?
> >>>
> >>> So far no timeout at all (after about 36 hours).
> >>
> >> Good. I have a new patch for you then :P
> >>
> >> This version checks whether the EC is already enabled or not before
> >> touching it
> >> and also restore the state when the module is unloaded.
> >> You should check that the driver keeps working when is unloaded and
> >> reloaded.
> >>
> >
> > I tried your latest patch on a P7P55D Deluxe and get this:
> >>
> >> [ 10.419119] ACPI Error: Field [PR11] at 64 exceeds Buffer [NULL] size
> >> 32 (bits) (20090903/dsopcode-596)
> >> [ 10.419125] ACPI Error (psparse-0537): Method parse/execution failed
> >> [\_SB_.PCI0.SBRG.ASOC.GITM] (Node ffff88023f8147a0), AE_AML_BUFFER_LIMIT
> >> [ 10.419157] ATK0110 ATK0110:00: GITM[0x11060004] ACPI exception:
> >> AE_AML_BUFFER_LIMIT
> >> [ 10.419158] ATK0110 ATK0110:00: Unable to query EC status
> >> [ 10.419161] ATK0110: probe of ATK0110:00 failed with error -5
>
> I see. GITM probably expects the same buffer structure as SITM, though
> in older models the upper bits were never used (hence I never noticed
> the problem). Working on a patch.
Ok, here it is:
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index fe4fa29..6cda109 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -35,18 +35,22 @@
#define METHOD_OLD_ENUM_FAN "FSIF"
#define ATK_MUX_HWMON 0x00000006ULL
+#define ATK_MUX_MGMT 0x00000011ULL
#define ATK_CLASS_MASK 0xff000000ULL
#define ATK_CLASS_FREQ_CTL 0x03000000ULL
#define ATK_CLASS_FAN_CTL 0x04000000ULL
#define ATK_CLASS_HWMON 0x06000000ULL
+#define ATK_CLASS_MGMT 0x11000000ULL
#define ATK_TYPE_MASK 0x00ff0000ULL
#define HWMON_TYPE_VOLT 0x00020000ULL
#define HWMON_TYPE_TEMP 0x00030000ULL
#define HWMON_TYPE_FAN 0x00040000ULL
-#define HWMON_SENSOR_ID_MASK 0x0000ffffULL
+#define ATK_ELEMENT_ID_MASK 0x0000ffffULL
+
+#define ATK_EC_ID 0x11060004ULL
enum atk_pack_member {
HWMON_PACK_FLAGS,
@@ -89,6 +93,9 @@ struct atk_data {
/* new inteface */
acpi_handle enumerate_handle;
acpi_handle read_handle;
+ acpi_handle write_handle;
+
+ bool disable_ec;
int voltage_count;
int temperature_count;
@@ -129,9 +136,22 @@ struct atk_sensor_data {
char const *acpi_name;
};
-struct atk_acpi_buffer_u64 {
- union acpi_object buf;
- u64 value;
+/* Return buffer format:
+ * [0-3] "value" is valid flag
+ * [4-7] value
+ * [8- ] unknown stuff on newer mobos
+ */
+struct atk_acpi_ret_buffer {
+ u32 flags;
+ u32 value;
+ u8 data[];
+};
+
+/* Input buffer used for GITM and SITM methods */
+struct atk_acpi_input_buf {
+ u32 id;
+ u32 param1;
+ u32 param2;
};
static int atk_add(struct acpi_device *device);
@@ -439,52 +459,146 @@ static int atk_read_value_old(struct atk_sensor_data *sensor, u64 *value)
return 0;
}
-static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value)
+static union acpi_object *atk_ggrp(struct atk_data *data, u16 mux)
{
- struct atk_data *data = sensor->data;
struct device *dev = &data->acpi_dev->dev;
+ struct acpi_buffer buf;
+ acpi_status ret;
struct acpi_object_list params;
- struct acpi_buffer ret;
union acpi_object id;
- struct atk_acpi_buffer_u64 tmp;
- acpi_status status;
+ union acpi_object *pack;
id.type = ACPI_TYPE_INTEGER;
- id.integer.value = sensor->id;
-
+ id.integer.value = mux;
params.count = 1;
params.pointer = &id;
- tmp.buf.type = ACPI_TYPE_BUFFER;
- tmp.buf.buffer.pointer = (u8 *)&tmp.value;
- tmp.buf.buffer.length = sizeof(u64);
- ret.length = sizeof(tmp);
- ret.pointer = &tmp;
+ buf.length = ACPI_ALLOCATE_BUFFER;
+ ret = acpi_evaluate_object(data->enumerate_handle, NULL, ¶ms, &buf);
+ if (ret != AE_OK) {
+ dev_err(dev, "GGRP[%#x] ACPI exception: %s\n", mux,
+ acpi_format_exception(ret));
+ return ERR_PTR(-EIO);
+ }
+ pack = buf.pointer;
+ if (pack->type != ACPI_TYPE_PACKAGE) {
+ /* Execution was successful, but the id was not found */
+ ACPI_FREE(pack);
+ return ERR_PTR(-ENOENT);
+ }
+
+ if (pack->package.count < 1) {
+ dev_err(dev, "GGRP[%#x] package is too small\n", mux);
+ ACPI_FREE(pack);
+ return ERR_PTR(-EIO);
+ }
+ return pack;
+}
+
+static union acpi_object *atk_gitm(struct atk_data *data, u64 id)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ struct atk_acpi_input_buf buf;
+ union acpi_object tmp;
+ struct acpi_object_list params;
+ struct acpi_buffer ret;
+ union acpi_object *obj;
+ acpi_status status;
+
+ buf.id = id;
+ buf.param1 = 0;
+ buf.param2 = 0;
+ tmp.type = ACPI_TYPE_BUFFER;
+ tmp.buffer.pointer = (u8 *)&buf;
+ tmp.buffer.length = sizeof(buf);
+
+ params.count = 1;
+ params.pointer = (void *)&tmp;
+
+ ret.length = ACPI_ALLOCATE_BUFFER;
status = acpi_evaluate_object_typed(data->read_handle, NULL, ¶ms,
&ret, ACPI_TYPE_BUFFER);
if (status != AE_OK) {
- dev_warn(dev, "%s: ACPI exception: %s\n", __func__,
+ dev_warn(dev, "GITM[%#llx] ACPI exception: %s\n", id,
acpi_format_exception(status));
- return -EIO;
+ return ERR_PTR(-EIO);
+ }
+ obj = ret.pointer;
+
+ /* Sanity check */
+ if (obj->buffer.length < 8) {
+ dev_warn(dev, "Unexpected ASBF length: %u\n",
+ obj->buffer.length);
+ ACPI_FREE(obj);
+ return ERR_PTR(-EIO);
}
+ return obj;
+}
- /* Return buffer format:
- * [0-3] "value" is valid flag
- * [4-7] value
- */
- if (!(tmp.value & 0xffffffff)) {
+static union acpi_object *atk_sitm(struct atk_data *data,
+ struct atk_acpi_input_buf *buf)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ struct acpi_object_list params;
+ union acpi_object tmp;
+ struct acpi_buffer ret;
+ union acpi_object *obj;
+ acpi_status status;
+
+ tmp.type = ACPI_TYPE_BUFFER;
+ tmp.buffer.pointer = (u8 *)buf;
+ tmp.buffer.length = sizeof(*buf);
+
+ params.count = 1;
+ params.pointer = &tmp;
+
+ status = acpi_evaluate_object_typed(data->write_handle, NULL, ¶ms,
+ &ret, ACPI_TYPE_BUFFER);
+ if (status != AE_OK) {
+ dev_warn(dev, "SITM[%#x] ACPI exception: %s\n", buf->id,
+ acpi_format_exception(status));
+ return ERR_PTR(-EIO);
+ }
+ obj = ret.pointer;
+
+ /* Sanity check */
+ if (obj->buffer.length < 8) {
+ dev_warn(dev, "Unexpected ASBF length: %u\n",
+ obj->buffer.length);
+ ACPI_FREE(obj);
+ return ERR_PTR(-EIO);
+ }
+ return obj;
+}
+
+static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value)
+{
+ struct atk_data *data = sensor->data;
+ struct device *dev = &data->acpi_dev->dev;
+ union acpi_object *obj;
+ struct atk_acpi_ret_buffer *buf;
+ int err = 0;
+
+ obj = atk_gitm(data, sensor->id);
+ if (IS_ERR(obj))
+ return PTR_ERR(obj);
+
+ buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+ if (buf->flags == 0) {
/* The reading is not valid, possible causes:
* - sensor failure
* - enumeration was FUBAR (and we didn't notice)
*/
- dev_info(dev, "Failure: %#llx\n", tmp.value);
- return -EIO;
+ dev_warn(dev, "Read failed, sensor = %#llx\n", sensor->id);
+ err = -EIO;
+ goto out;
}
- *value = (tmp.value & 0xffffffff00000000ULL) >> 32;
-
- return 0;
+ *value = buf->value;
+out:
+ ACPI_FREE(obj);
+ return err;
}
static int atk_read_value(struct atk_sensor_data *sensor, u64 *value)
@@ -713,43 +827,141 @@ cleanup:
return ret;
}
-static int atk_enumerate_new_hwmon(struct atk_data *data)
+static int atk_ec_present(struct atk_data *data)
{
struct device *dev = &data->acpi_dev->dev;
- struct acpi_buffer buf;
- acpi_status ret;
- struct acpi_object_list params;
- union acpi_object id;
union acpi_object *pack;
- int err;
+ union acpi_object *ec;
+ int ret;
int i;
- dev_dbg(dev, "Enumerating hwmon sensors\n");
+ pack = atk_ggrp(data, ATK_MUX_MGMT);
+ if (IS_ERR(pack)) {
+ if (PTR_ERR(pack) == -ENOENT) {
+ /* The MGMT class does not exists - that's ok */
+ dev_dbg(dev, "Class %#llx not found\n", ATK_MUX_MGMT);
+ return 0;
+ }
+ return PTR_ERR(pack);
+ }
- id.type = ACPI_TYPE_INTEGER;
- id.integer.value = ATK_MUX_HWMON;
- params.count = 1;
- params.pointer = &id;
+ /* Search the EC */
+ ec = NULL;
+ for (i = 0; i < pack->package.count; i++) {
+ union acpi_object *obj = &pack->package.elements[i];
+ union acpi_object *id;
- buf.length = ACPI_ALLOCATE_BUFFER;
- ret = acpi_evaluate_object_typed(data->enumerate_handle, NULL, ¶ms,
- &buf, ACPI_TYPE_PACKAGE);
- if (ret != AE_OK) {
- dev_warn(dev, METHOD_ENUMERATE ": ACPI exception: %s\n",
- acpi_format_exception(ret));
- return -ENODEV;
+ if (obj->type != ACPI_TYPE_PACKAGE)
+ continue;
+
+ id = &obj->package.elements[0];
+ if (id->type != ACPI_TYPE_INTEGER)
+ continue;
+
+ if (id->integer.value == ATK_EC_ID) {
+ ec = obj;
+ break;
+ }
}
- /* Result must be a package */
- pack = buf.pointer;
+ ret = (ec != NULL);
+ if (!ret)
+ /* The system has no EC */
+ dev_dbg(dev, "EC not found\n");
- if (pack->package.count < 1) {
- dev_dbg(dev, "%s: hwmon package is too small: %d\n", __func__,
- pack->package.count);
- err = -EINVAL;
- goto out;
+ ACPI_FREE(pack);
+ return ret;
+}
+
+static int atk_ec_enabled(struct atk_data *data)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ union acpi_object *obj;
+ struct atk_acpi_ret_buffer *buf;
+ int err;
+
+ obj = atk_gitm(data, ATK_EC_ID);
+ if (IS_ERR(obj)) {
+ dev_err(dev, "Unable to query EC status\n");
+ return PTR_ERR(obj);
+ }
+ buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+
+ if (buf->flags == 0) {
+ dev_err(dev, "Unable to query EC status\n");
+ err = -EIO;
+ } else {
+ err = (buf->value != 0);
+ dev_dbg(dev, "EC is %sabled\n",
+ err ? "en" : "dis");
+ }
+
+ ACPI_FREE(obj);
+ return err;
+}
+
+static int atk_ec_ctl(struct atk_data *data, int enable)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ union acpi_object *obj;
+ struct atk_acpi_input_buf sitm;
+ struct atk_acpi_ret_buffer *ec_ret;
+ int err = 0;
+
+ sitm.id = ATK_EC_ID;
+ sitm.param1 = enable;
+ sitm.param2 = 0;
+
+ obj = atk_sitm(data, &sitm);
+ if (IS_ERR(obj)) {
+ dev_err(dev, "Failed to %sable the EC\n",
+ enable ? "en" : "dis");
+ return PTR_ERR(obj);
+ }
+ ec_ret = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+ if (ec_ret->flags == 0) {
+ dev_err(dev, "Failed to %sable the EC\n",
+ enable ? "en" : "dis");
+ err = -EIO;
+ } else {
+ dev_info(dev, "EC %sabled\n",
+ enable ? "en" : "dis");
+ }
+
+ ACPI_FREE(obj);
+ return err;
+}
+
+static int atk_enumerate_new_hwmon(struct atk_data *data)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ union acpi_object *pack;
+ int err;
+ int i;
+
+ err = atk_ec_present(data);
+ if (err < 0)
+ return err;
+ if (err) {
+ err = atk_ec_enabled(data);
+ if (err < 0)
+ return err;
+ /* If the EC was disabled we will disable it again on unload */
+ data->disable_ec = err;
+
+ err = atk_ec_ctl(data, 1);
+ if (err) {
+ data->disable_ec = false;
+ return err;
+ }
}
+ dev_dbg(dev, "Enumerating hwmon sensors\n");
+
+ pack = atk_ggrp(data, ATK_MUX_HWMON);
+ if (IS_ERR(pack))
+ return PTR_ERR(pack);
+
for (i = 0; i < pack->package.count; i++) {
union acpi_object *obj = &pack->package.elements[i];
@@ -758,8 +970,7 @@ static int atk_enumerate_new_hwmon(struct atk_data *data)
err = data->voltage_count + data->temperature_count + data->fan_count;
-out:
- ACPI_FREE(buf.pointer);
+ ACPI_FREE(pack);
return err;
}
@@ -895,6 +1106,15 @@ static int atk_check_new_if(struct atk_data *data)
}
data->read_handle = ret;
+ /* De-multiplexer (write) */
+ status = acpi_get_handle(data->atk_handle, METHOD_WRITE, &ret);
+ if (status != AE_OK) {
+ dev_dbg(dev, "method " METHOD_READ " not found: %s\n",
+ acpi_format_exception(status));
+ return -ENODEV;
+ }
+ data->write_handle = ret;
+
return 0;
}
@@ -915,6 +1135,7 @@ static int atk_add(struct acpi_device *device)
data->acpi_dev = device;
data->atk_handle = device->handle;
INIT_LIST_HEAD(&data->sensor_list);
+ data->disable_ec = false;
buf.length = ACPI_ALLOCATE_BUFFER;
ret = acpi_evaluate_object_typed(data->atk_handle, BOARD_ID, NULL,
@@ -973,6 +1194,8 @@ static int atk_add(struct acpi_device *device)
cleanup:
atk_free_sensors(data);
out:
+ if (data->disable_ec)
+ atk_ec_ctl(data, 0);
kfree(data);
return err;
}
@@ -988,6 +1211,11 @@ static int atk_remove(struct acpi_device *device, int type)
atk_free_sensors(data);
hwmon_device_unregister(data->hwmon_dev);
+ if (data->disable_ec) {
+ if (atk_ec_ctl(data, 0))
+ dev_err(&device->dev, "Failed to disable EC\n");
+ }
+
kfree(data);
return 0;
Luca
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/