uvcvideo: Finally fix Logitech Quickcam for Notebooks Pro

[Ondrej Zary]

Hello,
I have a Logitech Quickcam for Notebooks Pro camera (046d:08c3) which just 
does not work even with kernel 2.6.31 and has never worked well before.

On http://linux-uvc.berlios.de/, there are two problems listed. I want to 
really fix these two problems so the camera will just work after plugging in 
(and not disconnect). I started with problem no. 2 as this causes the camera 
not to work at all when plugged in:

usb 5-2.4: new high speed USB device using ehci_hcd and address 7
usb 5-2.4: configuration #1 chosen from 1 choice
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c3)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling 
workaround.
uvcvideo: Failed to query (129) UVC probe control : -110 (exp. 26).
uvcvideo: Failed to initialize the device (-5).

When I do "modprobe snd_usb_audio", then "rmmod snd_usb_audio" and 
finally "modprobe uvcvideo", it works. So it looks like snd_usb_audio does 
some initialization that allows uvcvideo to work. It didn't work at all I 
didn't have snd_usb_audio module compiled.

What was the change that supposedly broke this in 2.6.22?

-- 
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/