Re: sata_mv 0000:03:06.0: PCI ERROR; PCI IRQ cause=0x30000040

[Bernie Innocenti]

El Tue, 06-10-2009 a las 15:25 +0300, Harri Olin escribió:
> Mark Lord wrote:
> > Bernie Innocenti wrote:
> >> The error in the subject appears in the console immediately followed bv
> >> a hard freeze of the machine.  The error occurs reproducibly on two
> >> identical Opteron servers, each one equipped with two identical
> >> controller cards:
> >>
> >> 03:04.0 SCSI storage controller: Marvell Technology Group Ltd. 
> >> MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
> >> 03:06.0 SCSI storage controller: Marvell Technology Group Ltd. 
> >> MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
> >>
> >> We can trigger the problem within a few seconds by starting a
> >> reconstruction on a drive hooked to port 4 (counting from 0) of the
> >> second controller.  Oddly, every other drive works reliably and the
> >> faulty drive works if we connect it to, for example, port 4 of the first
> >> controller.
> >>
> >> Tested with Debian kernels 2.6.26-19 and 2.6.30-8.  Let me know if
> >> further details are needed.
> > ..
> >> 0000:03:06.0: PCI ERROR; PCI IRQ cause=0x30000040..
> > ..
> >
> >  0x30000040 here means "MRdPerr":
> >    "bad data parity detected during PCI master read".
> >
> > Which means there that a data parity error happened
> > during outgoing data transfer on the PCI-X bus.
> > This could happen due to noise on the bus,
> > dying capacitors, or (?) bad RAM (not sure about the last one).
> >
> I have heard same thing happened with same kind of configuration, using 
> Supermicro H8DME-2 motherboard, Opteron 2378 CPU.
>
>Even the controllers were on same slots.

Close.  Mine is a Supermicro H8DM8-2 with 2x Opteron 2374 HE CPU.


> My initial suspicion was that the motherboard does not drop the PCI-X 
> bus frequency to 100MHz and drives the bus at 133MHz even though there 
> are 2 controllers connected. Proposed fix was to move the other 
> controller to other bus, as the H8DME-2 has four PCI-X slots, 2x100MHz 
> and 2x133MHz, but I haven't yet heard back if it helped.

Thanks for this hint, I'll try this tomorrow,


> Even the kernel was same - latest Debian distribution kernel. Might be 
> worthwile to try using vanilla kernel.org kernel if possible.

As a matter of fact, yesterday  I tried booting off an Open Solaris
Nexenta CD and I couldn't reproduce the issue, although I couldn't
reproduce the exact same conditions that trigger the bug systematically
on Linux.


> I have at home two 6081 controllers at same bus but at 100MHz and no 
> problems yet.

Is there a way to find out what the current PCI-X bus frequency is from
Linux?  And from the BIOS?

-- 
   // Bernie Innocenti - http://codewiz.org/
 \X/  Sugar Labs       - http://sugarlabs.org/

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/