Re: sata_mv 0000:03:06.0: PCI ERROR; PCI IRQ cause=0x30000040

[Bernie Innocenti]

El Tue, 06-10-2009 a las 16:06 -0400, Mark Lord escribió:
> If you could also send me the output of "lspci -vv" for the cards
> then I can also have a quick look at chipset errata for possibilities.

See below.

Looking at the Status field, is it correct to say that the cards are
definitely running at 133MHz?  Is there a way to force them to a
different speed from Linux or from the BIOS?


> The early revs of these chips did have a number of errata specific to PCI-X.

I checked the revision (09) against the sata_mv source and I couldn't
spot anything relevant to us.


03:04.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
	Subsystem: Marvell Technology Group Ltd. Device 11ab
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
	Region 2: I/O ports at e800 [size=256]
	Region 3: [virtual] Memory at fdc00000 (32-bit, non-prefetchable) [size=4M]
	[virtual] Expansion ROM at fd800000 [disabled] [size=4M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [60] PCI-X non-bridge device
		Command: DPERE- ERO- RBC=512 OST=4
		Status: Dev=03:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=4 DMCRS=8 RSCEM- 266MHz- 533MHz-
	Kernel driver in use: sata_mv
	Kernel modules: sata_mv

03:06.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
	Subsystem: Marvell Technology Group Ltd. Device 11ab
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
	Region 2: I/O ports at e400 [size=256]
	Region 3: [virtual] Memory at fd400000 (32-bit, non-prefetchable) [size=4M]
	[virtual] Expansion ROM at fd000000 [disabled] [size=4M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [60] PCI-X non-bridge device
		Command: DPERE- ERO- RBC=512 OST=4
		Status: Dev=03:06.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=4 DMCRS=8 RSCEM- 266MHz- 533MHz-
	Kernel driver in use: sata_mv
	Kernel modules: sata_mv


-- 
   // Bernie Innocenti - http://codewiz.org/
 \X/  Sugar Labs       - http://sugarlabs.org/

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/