[RFC][PATCH] Add interrupt handling capability to pca953x

[Marc Zyngier]

Most of the GPIO expanders controlled by the pca953x driver are
able to report changes on the input pins through an *INT pin.

This patch implements a very basic way for the platform code to
be alerted when some input changes (both edge detection).
It can be seen as a poor man irq_chip.

Alternatively, this could be turned into a full-fledged irq_chip,
though I'm not sure it is worth the complexity.

The driver has been tested on an Arcom Zeus.

Signed-off-by: Marc Zyngier <maz@xxxxxxxxxxxxxxx>
---
 drivers/gpio/pca953x.c      |   96 +++++++++++++++++++++++++++++++++++++------
 include/linux/i2c/pca953x.h |    7 +++-
 2 files changed, 89 insertions(+), 14 deletions(-)

diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 6a2fb3f..528b35f 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #ifdef CONFIG_OF_GPIO
@@ -26,23 +27,27 @@
 #define PCA953X_INVERT         2
 #define PCA953X_DIRECTION      3
 
+#define PCA953X_GPIOS	       0x00FF
+#define PCA953X_INT	       0x0100
+
 static const struct i2c_device_id pca953x_id[] = {
-	{ "pca9534", 8, },
-	{ "pca9535", 16, },
+	{ "pca9534", 8  | PCA953X_INT, },
+	{ "pca9535", 16 | PCA953X_INT, },
 	{ "pca9536", 4, },
-	{ "pca9537", 4, },
-	{ "pca9538", 8, },
-	{ "pca9539", 16, },
-	{ "pca9554", 8, },
-	{ "pca9555", 16, },
+	{ "pca9537", 4  | PCA953X_INT, },
+	{ "pca9538", 8  | PCA953X_INT, },
+	{ "pca9539", 16 | PCA953X_INT, },
+	{ "pca9554", 8  | PCA953X_INT, },
+	{ "pca9555", 16 | PCA953X_INT, },
 	{ "pca9556", 8, },
 	{ "pca9557", 8, },
 
 	{ "max7310", 8, },
-	{ "max7315", 8, },
-	{ "pca6107", 8, },
-	{ "tca6408", 8, },
-	{ "tca6416", 16, },
+	{ "max7313", 16 | PCA953X_INT, },
+	{ "max7315", 8  | PCA953X_INT, },
+	{ "pca6107", 8  | PCA953X_INT, },
+	{ "tca6408", 8  | PCA953X_INT, },
+	{ "tca6416", 16 | PCA953X_INT, },
 	/* NYET:  { "tca6424", 24, }, */
 	{ }
 };
@@ -53,6 +58,11 @@ struct pca953x_chip {
 	uint16_t reg_output;
 	uint16_t reg_direction;
 
+	uint16_t int_mask;
+	uint16_t int_prev_input;
+	void (*interrupt)(uint16_t, uint16_t, void *);
+	void *context;
+
 	struct i2c_client *client;
 	struct pca953x_platform_data *dyn_pdata;
 	struct gpio_chip gpio_chip;
@@ -202,6 +212,34 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
 	gc->names = chip->names;
 }
 
+static irqreturn_t pca953x_irq_quick_handler(int irq, void *devid)
+{
+	/* Always happy to serve... */
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t pca953x_irq_handler(int irq, void *devid)
+{
+	struct pca953x_chip *chip = devid;
+	uint16_t reg_val;
+	uint16_t mask;
+	int ret;
+
+	ret = pca953x_read_reg(chip, PCA953X_INPUT, &reg_val);
+	if (ret)
+		return IRQ_HANDLED;
+
+	reg_val &= (chip->int_mask & chip->reg_direction);
+	mask = reg_val ^ chip->int_prev_input;
+
+	if (mask) {
+		chip->int_prev_input = reg_val;
+		chip->interrupt(reg_val, mask, chip->context);
+	}
+
+	return IRQ_HANDLED;
+}
+
 /*
  * Handlers for alternative sources of platform_data
  */
@@ -286,7 +324,7 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	/* initialize cached registers from their original values.
 	 * we can't share this chip with another i2c master.
 	 */
-	pca953x_setup_gpio(chip, id->driver_data);
+	pca953x_setup_gpio(chip, id->driver_data & PCA953X_GPIOS);
 
 	ret = pca953x_read_reg(chip, PCA953X_OUTPUT, &chip->reg_output);
 	if (ret)
@@ -301,10 +339,39 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	if (ret)
 		goto out_failed;
 
+	if (pdata->interrupt && (id->driver_data & PCA953X_INT)) {
+		ret = pca953x_read_reg(chip, PCA953X_INPUT,
+				       &chip->int_prev_input);
+		if (ret)
+			goto out_failed;
+
+		chip->interrupt = pdata->interrupt;
+		chip->int_mask = pdata->mask;
+
+		/*
+		 * There is no way to know which GPIO line generated the
+		 * interrupt.  We have to rely on the previous read for
+		 * this purpose.
+		 */
+		chip->int_prev_input &= chip->int_mask & chip->reg_direction;
+
+		ret = request_threaded_irq(client->irq,
+					   pca953x_irq_quick_handler,
+					   pca953x_irq_handler, 0,
+					   dev_name(&client->dev), chip);
+		if (ret) {
+			dev_err(&client->dev, "failed to request irq %d\n",
+				client->irq);
+			goto out_failed;
+		}
+	}
 
 	ret = gpiochip_add(&chip->gpio_chip);
-	if (ret)
+	if (ret) {
+		if (pdata->interrupt)
+			free_irq(client->irq, chip);
 		goto out_failed;
+	}
 
 	if (pdata->setup) {
 		ret = pdata->setup(client, chip->gpio_chip.base,
@@ -345,6 +412,9 @@ static int pca953x_remove(struct i2c_client *client)
 		return ret;
 	}
 
+	if (chip->interrupt)
+		free_irq(client->irq, chip);
+
 	kfree(chip->dyn_pdata);
 	kfree(chip);
 	return 0;
diff --git a/include/linux/i2c/pca953x.h b/include/linux/i2c/pca953x.h
index 81736d6..1e787c0 100644
--- a/include/linux/i2c/pca953x.h
+++ b/include/linux/i2c/pca953x.h
@@ -7,7 +7,10 @@ struct pca953x_platform_data {
 	/* initial polarity inversion setting */
 	uint16_t	invert;
 
-	void		*context;	/* param to setup/teardown */
+	/* input bitmask to trigger the interrupt callback */
+	uint16_t	mask;
+
+	void		*context;	/* param to setup/teardown/interrupt */
 
 	int		(*setup)(struct i2c_client *client,
 				unsigned gpio, unsigned ngpio,
@@ -15,5 +18,7 @@ struct pca953x_platform_data {
 	int		(*teardown)(struct i2c_client *client,
 				unsigned gpio, unsigned ngpio,
 				void *context);
+	void		(*interrupt)(uint16_t val, uint16_t mask,
+				void *context);
 	char		**names;
 };
-- 
1.6.0.4



-- 
I'm the slime oozin' out from your TV set...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/