Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine

[fengxiangjun]

Hi, I can not capture the full failing boot log.
The kernel panic, and shift + pageup does not work. 

With output to serial console, the problem goes away.

I think with an initrd, I can reproduce the problem and capture the full 
failing boot log.
But with an initrd, there's no problem. Every thing works fine.

Thanks.

On Thu, 24 Dec 2009, Tejun Heo wrote:

> On 12/23/2009 06:29 PM, fengxiangjun wrote:
> > 
> > Hi,
> > 
> > with this patch, the problem still exists.
> > 
> > ata1.01: XXX debounce start, SStatus=4
> > ata1.01: XXX debounce done, SStatus=4, DET stable for 520 msecs
> > ata1.00: SATA link down (SStatus 0 SControl 301)
> > ata1.01: SATA link down (SStatus 0 Scontrol 300)
> > ...
> > VFS; cannot open root device ...
> > 
> > The kernel just panic, and I can't see what's the messege printing before 
> > that.
> > 
> > So, I tried 'console=ttyS0 console=tty1'ïfull dmesg attachedã
> 
> Can you please capture full failing log?  In the attached log, ata1.00
> is detected successfully.
> 
> Thanks.
> 
> -- 
> tejun
> 
---------------------------------------------------------------------------------------------------
Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) 
is intended only for the use of the intended recipient and may be confidential and/or privileged of 
Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is 
not the intended recipient, unauthorized use, forwarding, printing,  storing, disclosure or copying 
is strictly prohibited, and may be unlawful.If you have received this communication in error,please 
immediately notify the sender by return e-mail, and delete the original message and all copies from 
your system. Thank you. 
---------------------------------------------------------------------------------------------------