[RFC][PATCH] genirq: Introduce IRQF_ALLOW_NESTED flag forrequest_irq()

[Marc Zyngier]

Now that we enjoy threaded interrupts, we're starting to see irq_chip
implementations (wm831x, pca953x) that make use of threaded interrupts
for the controller, and nested interrupts for the client interrupt. It
all works very well, with one drawback:

Drivers requesting an IRQ must know whether the IRQ is configured as
nested or not, and call request_threaded_irq() or request_irq()
accordingly. The problem is that the requesting driver sometimes
doesn't know about the nature of the interrupt, specially when the
interrupt controller is a discrete chip that can be connected to a
wide variety of otherwise perfectly supported hardware. pca953x is an
example of such a case (see the thread starting at
http://lists.infradead.org/pipermail/linux-arm-kernel/2009-December/006651.html).

The following patch introduces the IRQF_ALLOW_NESTED flag, which acts
as a "contract" between the driver and the genirq framework. By using
this flag as part of the request_irq() call, the driver signals that
the handler will happilly run either in hardirq or nested context,
without any ill effect. The benefit of this is a single API for
drivers. It still requires the driver to be audited, and the flag
added to the request_irq() call.

Signed-off-by: Marc Zyngier <maz@xxxxxxxxxxxxxxx>
---
 include/linux/interrupt.h |    3 +++
 kernel/irq/manage.c       |   12 +++++++++---
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 75f3f00..d166e24 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -52,6 +52,8 @@
  * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
  *                Used by threaded interrupts which need to keep the
  *                irq line disabled until the threaded handler has been run.
+ * IRQF_ALLOW_NESTED - Handler can be either run as hardirq or nested
+ *		       interrupt.
  */
 #define IRQF_DISABLED		0x00000020
 #define IRQF_SAMPLE_RANDOM	0x00000040
@@ -62,6 +64,7 @@
 #define IRQF_NOBALANCING	0x00000800
 #define IRQF_IRQPOLL		0x00001000
 #define IRQF_ONESHOT		0x00002000
+#define IRQF_ALLOW_NESTED	0x00004000
 
 /*
  * Bits used by threaded handlers:
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index eb6078c..3635276 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -641,12 +641,18 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 
 	/*
 	 * Check whether the interrupt nests into another interrupt
-	 * thread.
+	 * thread. Nested interrupt must provide a thread function
+	 * unless it raises the IRQF_ALLOW_NESTED flag.
 	 */
 	nested = desc->status & IRQ_NESTED_THREAD;
 	if (nested) {
-		if (!new->thread_fn)
-			return -EINVAL;
+		if (!new->thread_fn) {
+			if (new->flags & IRQF_ALLOW_NESTED)
+				new->thread_fn = new->handler;
+			else
+				return -EINVAL;
+		}
+
 		/*
 		 * Replace the primary handler which was provided from
 		 * the driver for non nested interrupt handling by the
-- 
1.6.5.7

-- 
I'm the slime oozin' out from your TV set...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/