Re: sky2 panic in 2.6.32.1 under load (new oops)

From: Michael Breuer
Date: Tue Dec 29 2009 - 12:39:47 EST


Ok - I can also try with VT-D disabled for another data point.
On 12/29/2009 12:30 PM, Stephen Hemminger wrote:
There could be DMA problems, either because chip isn't remembering
upper address, or because of lack of wires from chip to memory controller;
there have been problems on motherboards where I/O devices couldn't access
all of memory.

Try this, it forces each transmit to have full 64 bit address. It drops an
optimization that was done to reduce the number of transmit descriptors
used.

--- a/drivers/net/sky2.c 2009-12-29 09:23:37.114074275 -0800
+++ b/drivers/net/sky2.c 2009-12-29 09:26:38.699912035 -0800
@@ -1038,10 +1038,11 @@ static void tx_init(struct sky2_port *sk
sky2->tx_tcpsum = 0;
sky2->tx_last_mss = 0;

- le = get_tx_le(sky2,&sky2->tx_prod);
- le->addr = 0;
- le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->tx_last_upper = 0;
+ if (sizeof(dma_addr_t) == sizeof(u32)) {
+ le = get_tx_le(sky2,&sky2->tx_prod);
+ le->addr = 0;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ }
}

/* Update chip's next pointer */
@@ -1669,10 +1670,9 @@ static netdev_tx_t sky2_xmit_frame(struc

/* Send high bits if needed */
upper = upper_32_bits(mapping);
- if (upper != sky2->tx_last_upper) {
+ if (sizeof(mapping)> sizeof(u32)) {
le = get_tx_le(sky2,&slot);
le->addr = cpu_to_le32(upper);
- sky2->tx_last_upper = upper;
le->opcode = OP_ADDR64 | HW_OWNER;
}

@@ -1762,10 +1762,9 @@ static netdev_tx_t sky2_xmit_frame(struc
goto mapping_unwind;

upper = upper_32_bits(mapping);
- if (upper != sky2->tx_last_upper) {
+ if (sizeof(mapping)> sizeof(u32)) {
le = get_tx_le(sky2,&slot);
le->addr = cpu_to_le32(upper);
- sky2->tx_last_upper = upper;
le->opcode = OP_ADDR64 | HW_OWNER;
}

--- a/drivers/net/sky2.h 2009-12-29 09:23:37.164072886 -0800
+++ b/drivers/net/sky2.h 2009-12-29 09:25:15.302197993 -0800
@@ -2191,7 +2191,6 @@ struct sky2_port {

u16 tx_pending;
u16 tx_last_mss;
- u32 tx_last_upper;
u32 tx_tcpsum;

struct rx_ring_info *rx_ring ____cacheline_aligned_in_smp;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/