Re: [PATCH 00/14] pci: update pci bridge resources
From: Patrick Keller
Date: Fri Jan 08 2010 - 16:34:14 EST
On Tue, 2009-12-22 at 23:02 +0000, Yinghai Lu wrote:
> this patchset is trying to update pci bridge BAR when that BAR is big enough.
>
> 1. boot time:
>
> BIOS separate IO range between several IOHs, and on some slots, BIOS assign
> the resource to the bridge, but stop assigning resource to the device under
> that bridge, because the device need big resource.
>
> so patches (first 8) are trying to
> a. pci assign unassign and record the failed device resource.
> b. clear the BIOS assigned resource of the parent bridge of fail device
> c. go back and call pci assign unsigned
> d. if it still fail, will go up more bridges. and clear and try again.
>
> v2: Jesse doesn't like it is in find_free_bus_resource...
> try to move out of pci_bus_size_bridges loop.
> v3: add pci_setup_bridge calling after pci_bridge_release_not_used_res.
> only clear release those res for x86.
> v4: Bjorn want to release use dev instead of bus.
> v5: Kenji pointed out it will have problem with several level bridge.
> so let only handle leaf bridge.
> v6: address Kenji's request (new pci_bus_release...). and change applying order
> move back release to pci_assign_unassigned_resource
> v7: change functions name pci_bus_release_unused_bridge_res according to Jesse
> v8: address Eric's concern, only overwrite leaf bridge resource that is not big
> enough need to do it in two steps, and first step recore the failed res,
> and don't touch bridge res that programmed by firmware. second step will
> try to release bridge resource that is too small at first.
> v9: refresh to be applied after bjorn's patch, and remove trick about save
> size and restore resource second try.
> v11:add pci=try=5, about more try to change more bridge
> v12:not shrink pci bridge resource
>
> 2. hotplug:
> BIOS separate IO range between several IOHs, and on some slots, BIOS assign
> the resource to every bridge. (8M) but when insert one card that big resource,
> the card can not get resource. because kernel will not touch the bridge
> resource.
>
> so patches (9-11) are trying to
> a. assign resource to devices with that slot. and record fail devices
> b. if there is some failed, will clear sepcifically io port of bridge, or mmio of bridge, or mmio pref of bridge.
> c. try to assign the parent bridge of the slot.
>
> v2: address Alex's concern about pci remove/rescan feature about
> pci_setup_bridge changes.
> v3: Kenji pointed out that pci_config_slot need to be called before
> pci_bus_add_devices()
> v4: move out pci_is_enabled checkout of pci_setup_bridge()
> v5: change the applying sequence.
> v6: change the functions name according to Jesse
> v8: address Eric's concern, only overwrite leaf bridge resource that is not
> big enough
> v9: refresh to be applied after bjorn's patch, and remove trick about save
> size and restore resource second try.
> v10:alex found need to have export for pci_assign_unassigned_bridge_resources
> v11: pass check_leaf with pci_bus_release_unused_bridge_res
>
> patches (12-13)
> will try to shrink, the pci hotplug related pcie port, so could save some for
> others.
>
> -v13: change resource_list to resource_list_x, to save size and flags aside,
> otherwise grandchild res will get confused with son's res as could be used
>
> -v14: default it is disabled. could use pci=try=2 to enable it.
> -v15: seperate release_child_resources aside.
>
> Thanks
>
> Yinghai
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
I'm going to work on testing this patch series today with a focus on
hotplug and fakephp functionality.
Pat
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/