Re: Strange EHCI/OHCI IRQ and other PCI errors on boot with 2.6.32(which 2.6.26 did not see) on Geode LX/CS5536.
From: Alan Stern
Date: Wed Jan 20 2010 - 17:07:06 EST
On Wed, 20 Jan 2010, Lennart Sorensen wrote:
> On Wed, Jan 20, 2010 at 03:20:46PM -0500, Alan Stern wrote:
> > Okay, this means that something else is affecting the IRQ line.
> Yep. I went and disabled irq5 on the LPC bus, and that didn't help.
> > > Interestingly the number of interrupts listed in /proc/interrupts is
> > > exactly 300000.
> > That's probably because the kernel disabled the IRQ after 100000
> > unhandled interrupts, and re-enabled it each time a new device was
> > registered for that IRQ.
> Certainly seems to be the case.
> > Or you could just stop using USB on the old box. :-)
> Well I just tried another box, and same thing.
> If I boot with 'irqpoll' then everything seems fine.
> Any idea how I can figure out why irqpoll makes it happy? Does it give
> any reports anywhere about misrouted irqs?
Not that I know of.
Does 2.6.26 fail on the new machine?
Are you using a .config different from the one that used to work with
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/