Re: [PATCH] sky2: receive dma mapping error handling

[Justin P. Mattock]

On 02/03/10 09:07, Michael Breuer wrote:
> On 02/03/2010 11:56 AM, Stephen Hemminger wrote:
> > On Wed, 03 Feb 2010 11:47:19 -0500
> > Michael Breuer<mbreuer@xxxxxxxxxx> wrote:
> >
> > > Tracked this down. The status being returned is 0x3c0080 - good flow
> > > control packets. Nothing is actually being dropped (confirmed by packet
> > > trace on switch compared with packet trace on server).
> > >
> > > I whipped up a trivial patch to not count these as dropped packets and
> > > will post to netdev.
> > >
> > > I'm not really sure what the driver should be doing in this case, but
> > > resubmit seems to work.
> > Looks like a flow control negotiation issue. You probably turned off
> > flow control on the Linux side, but the switch is still doing flow
> > control.
> According to the driver:
> Feb 3 12:03:02 mail kernel: sky2 eth0: Link is up at 1000 Mbps, full
> duplex, flow control both
>
> So if the rx flow control packet status is due to flow control being
> disabled, then there's a different issue.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


hmm.. after an hour or so I'm not seeing anything.
from what I remember I turned the machine on in the
hotel, then left the system there as I went out for a few hours
(so maybe I need to wait).

Anyways I did keep dmesg of when this occurred, basically
the log was spammed with these:

[  863.294057] sky2 eth0: rx error, status 0x580002 length 88
[  865.646645] sky2 eth0: rx error, status 0x600002 length 96
[ 1286.420471] sky2 eth0: rx error, status 0x600002 length 96
[ 1286.499459] sky2 eth0: rx error, status 0x600002 length 96
[ 1746.903826] sky2 eth0: rx error, status 0x600002 length 96
[ 1754.263692] sky2 eth0: rx error, status 0x600002 length 96
[ 1755.309360] sky2 eth0: rx error, status 0x680002 length 104
[ 2213.256294] sky2 eth0: rx error, status 0x600002 length 96
[ 2219.653342] sky2 eth0: rx error, status 0x580002 length 88
[ 2221.673601] sky2 eth0: rx error, status 0x600002 length 96
[ 2679.654655] sky2 eth0: rx error, status 0x680002 length 104
[ 2692.315058] sky2 eth0: rx error, status 0x500002 length 80
[ 2694.349612] sky2 eth0: rx error, status 0x580002 length 88
[ 2703.676717] sky2 eth0: rx error, status 0x700002 length 112
[ 2703.826375] sky2 eth0: rx error, status 0x600002 length 96
[ 3187.504843] sky2 eth0: rx error, status 0x600002 length 96
[ 3189.560744] sky2 eth0: rx error, status 0x600002 length 96
[ 3672.475719] sky2 eth0: rx error, status 0x680002 length 104
[ 3676.696959] sky2 eth0: rx error, status 0x680002 length 104

but while using the system with this, I didn't notice anything
out of the ordinary.
(if this fires off I can try a bisect for you guys, but right now
since I'm not seeing anything, might be a different story);

Justin P. Mattock
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/