linux-next: manual merge of the omap tree with the arm tree
From: Stephen Rothwell
Date: Thu Feb 04 2010 - 18:20:39 EST
Hi all,
Today's linux-next merge of the omap tree got a conflict in
arch/arm/mach-omap1/include/mach/debug-macro.S
arch/arm/mach-omap2/include/mach/debug-macro.S between commit
7f62dc4756eaf761570b96250630d48f80397d64 ("ARM: 5910/1: ARM: Add tmp
register for addruart and loadsp") from the arm tree and commit 209f5d2d2c8e385834d138ac593df86504a28ffe ("omap: Make
uncompress code and DEBUG_LL code generic") from the omap tree.
I fixed it up (see below) and can carry the fix as necessary.
--
Cheers,
Stephen Rothwell sfr@xxxxxxxxxxxxxxxx
diff --cc arch/arm/mach-omap1/include/mach/debug-macro.S
index 8c74cab,0187391..0000000
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@@ -11,7 -11,43 +11,43 @@@
*
*/
+ #include <linux/serial_reg.h>
+
+ #include <plat/serial.h>
+
+ .pushsection .data
+ omap_uart_phys: .word 0x0
+ omap_uart_virt: .word 0x0
+ .popsection
+
+ /*
+ * Note that this code won't work if the bootloader passes
+ * a wrong machine ID number in r1. To debug, just hardcode
+ * the desired UART phys and virt addresses temporarily into
+ * the omap_uart_phys and omap_uart_virt above.
+ */
- .macro addruart,rx
+ .macro addruart, rx, tmp
+
+ /* Use omap_uart_phys/virt if already configured */
+ 9: mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =omap_uart_phys @ physical base address
+ ldrne \rx, =omap_uart_virt @ virtual base
+ ldr \rx, [\rx, #0]
+ cmp \rx, #0 @ is port configured?
+ bne 99f @ already configured
+
+ /* Check 7XX UART1 scratchpad register for uart to use */
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0xff000000 @ physical base address
+ movne \rx, #0xfe000000 @ virtual base
+ orr \rx, \rx, #0x00fb0000 @ OMAP1UART1
+ ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)]
+ cmp \rx, #0 @ anything in 7XX scratchpad?
+ bne 10f @ found 7XX uart
+
+ /* Check 15xx/16xx UART1 scratchpad register for uart to use */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xff000000 @ physical base address
diff --cc arch/arm/mach-omap2/include/mach/debug-macro.S
index 86979d7,eb05a22..0000000
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@@ -11,32 -11,107 +11,107 @@@
*
*/
+ #include <linux/serial_reg.h>
+
+ #include <plat/serial.h>
+
+ #define UART_OFFSET(addr) ((addr) & 0x00ffffff)
+
+ .pushsection .data
+ omap_uart_phys: .word 0
+ omap_uart_virt: .word 0
+ omap_uart_lsr: .word 0
+ .popsection
+
+ /*
+ * Note that this code won't work if the bootloader passes
+ * a wrong machine ID number in r1. To debug, just hardcode
+ * the desired UART phys and virt addresses temporarily into
+ * the omap_uart_phys and omap_uart_virt above.
+ */
- .macro addruart,rx
+ .macro addruart, rx, tmp
+
+ /* Use omap_uart_phys/virt if already configured */
+ 10: mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =omap_uart_phys @ physical base address
+ ldrne \rx, =omap_uart_virt @ virtual base address
+ ldr \rx, [\rx, #0]
+ cmp \rx, #0 @ is port configured?
+ bne 99f @ already configured
+
+ /* Check UART1 scratchpad register for uart to use */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- #ifdef CONFIG_ARCH_OMAP2
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xfa000000 @ virtual base
- orr \rx, \rx, #0x0006a000
- #ifdef CONFIG_OMAP_LL_DEBUG_UART2
- add \rx, \rx, #0x00002000 @ UART 2
- #endif
- #ifdef CONFIG_OMAP_LL_DEBUG_UART3
- add \rx, \rx, #0x00004000 @ UART 3
- #endif
-
- #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
- moveq \rx, #0x48000000 @ physical base address
- movne \rx, #0xfa000000 @ virtual base
- orr \rx, \rx, #0x0006a000
- #ifdef CONFIG_OMAP_LL_DEBUG_UART2
- add \rx, \rx, #0x00002000 @ UART 2
- #endif
- #ifdef CONFIG_OMAP_LL_DEBUG_UART3
- add \rx, \rx, #0x00fb0000 @ UART 3
- add \rx, \rx, #0x00006000
- #endif
- #endif
+ orr \rx, \rx, #0x0006a000 @ uart1 on omap2/3/4
+ ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad
+
+ /* Select the UART to use based on the UART1 scratchpad value */
+ cmp \rx, #0 @ no port configured?
+ beq 21f @ if none, try to use UART1
+ cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1
+ beq 21f @ configure OMAP2/3/4UART1
+ cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2
+ beq 22f @ configure OMAP2/3/4UART2
+ cmp \rx, #OMAP2UART3 @ only on 24xx
+ beq 23f @ configure OMAP2UART3
+ cmp \rx, #OMAP3UART3 @ only on 34xx
+ beq 33f @ configure OMAP3UART3
+ cmp \rx, #OMAP4UART3 @ only on 44xx
+ beq 43f @ configure OMAP4UART3
+ cmp \rx, #OMAP3UART4 @ only on 36xx
+ beq 34f @ configure OMAP3UART4
+ cmp \rx, #OMAP4UART4 @ only on 44xx
+ beq 44f @ configure OMAP4UART4
+ cmp \rx, #ZOOM_UART @ only on zoom2/3
+ beq 95f @ configure ZOOM_UART
+
+ /* Configure the UART offset from the phys/virt base */
+ 21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
+ b 98f
+ 22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
+ b 98f
+ 23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE)
+ b 98f
+ 33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
+ add \rx, \rx, #0x00fb0000
+ add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE
+ b 98f
+ 34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
+ add \rx, \rx, #0x00fb0000
+ add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE
+ b 98f
+ 43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE)
+ b 98f
+ 44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE)
+ b 98f
+ 95: mov \rx, #ZOOM_UART_BASE
+ ldr r1, =omap_uart_phys
+ str \rx, [r1, #0]
+ mov \rx, #ZOOM_UART_VIRT
+ ldr r1, =omap_uart_virt
+ str \rx, [r1, #0]
+ mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT)
+ ldr r1, =omap_uart_lsr
+ str \rx, [r1, #0]
+ b 10b
+
+ /* Store both phys and virt address for the uart */
+ 98: add \rx, \rx, #0x48000000 @ phys base
+ ldr r1, =omap_uart_phys
+ str \rx, [r1, #0]
+ sub \rx, \rx, #0x48000000 @ phys base
+ add \rx, \rx, #0xfa000000 @ virt base
+ ldr r1, =omap_uart_virt
+ str \rx, [r1, #0]
+ mov \rx, #(UART_LSR << OMAP_PORT_SHIFT)
+ ldr r1, =omap_uart_lsr
+ str \rx, [r1, #0]
+
+ b 10b
+ 99:
.endm
.macro senduart,rd,rx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/