Re: Linux mdadm superblock question.

From: Justin Piszcz
Date: Tue Feb 16 2010 - 08:14:30 EST




On Tue, 16 Feb 2010, Neil Brown wrote:

On Thu, 11 Feb 2010 18:00:23 -0500 (EST)
Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx> wrote:

Hi,

I may be converting a host to ext4 and was curious, is 0.90 still the only
superblock version for mdadm/raid-1 that you can boot from without having
to create an initrd/etc?

Are there any benefits to using a superblock > 0.90 for a raid-1 boot
volume < 2TB?

The only noticeable differences that I can think of are:
1/ If you reboot during recovery of a spare, then 0.90 will restart the
recovery at the start, while 1.x will restart from where it was up to.
2/ The /sys/class/block/mdXX/md/dev-YYY/errors counter is reset on each
re-assembly with 0.90, but is preserved across stop/start with 1.x
3/ If your partition starts on a multiple of 64K from the start of the
device and is the last partition and contains 0.90 metadata, then
mdadm can get confused by it.
4/ If you move the devices to a host with a different arch and different
byte-ordering, then extra effort will be needed to see the array for
0.90, but not for 1.x

I suspect none of these is a big issue.

It is likely that future extensions will only be supported on 1.x metadata.
For example I hope to add support for storing a bad-block list, so that a
read error during recovery will only be fatal for that block, not the whole
recovery process. This is unlikely ever to be supported on 0.90. However
it may not be possible to hot-enable it on 1.x either, depending on how much
space has been reserved for extra metadata, so there is no guarantee that
using 1.x now makes you future-proof.

And yes, 0.90 is still the only superblock version that supports in-kernel
autodetect, and I have no intention of adding in-kernel autodetect for any
other version.

NeilBrown


Hi Neil,

Thanks for the response, this is exactly what I was looking for and probably should be put in a FAQ.

Justin.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/