[PATCH] Staging:rtl8192e: fix comments style issue in r8180_93cx6.c This is a patch to the r8180_93cx6.c file that fixes up the comments styling issues found by the checkpatch.pl tool Signed-off-by: Tim Schofield <tim@weberpafrica.com>

[tim]

From: Tim Schofield <tim.schofield1960@xxxxxxxxxxxxxx>

---
 drivers/staging/rtl8192e/r8180_93cx6.c |   22 ++++++++++++++--------
 1 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/rtl8192e/r8180_93cx6.c b/drivers/staging/rtl8192e/r8180_93cx6.c
index 262ed5f..60fba80 100644
--- a/drivers/staging/rtl8192e/r8180_93cx6.c
+++ b/drivers/staging/rtl8192e/r8180_93cx6.c
@@ -23,12 +23,14 @@
 static void eprom_cs(struct net_device *dev, short bit)
 {
 	if (bit)
+		/* enable EPROM */
 		write_nic_byte(dev, EPROM_CMD,
 			       (1<<EPROM_CS_SHIFT) | \
-			       read_nic_byte(dev, EPROM_CMD)); //enable EPROM
+			       read_nic_byte(dev, EPROM_CMD));
 	else
+		/* disable EPROM */
 		write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
-			       &~(1<<EPROM_CS_SHIFT)); //disable EPROM
+			       &~(1<<EPROM_CS_SHIFT));
 
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
@@ -96,7 +98,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
 	u32 ret;
 
 	ret = 0;
-        //enable EPROM programming
+	/* enable EPROM programming */
 	write_nic_byte(dev, EPROM_CMD,
 		       (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
 	force_pci_posting(dev);
@@ -126,13 +128,17 @@ u32 eprom_read(struct net_device *dev, u32 addr)
 	eprom_send_bits_string(dev, read_cmd, 3);
 	eprom_send_bits_string(dev, addr_str, addr_len);
 
-	//keep chip pin D to low state while reading.
-	//I'm unsure if it is necessary, but anyway shouldn't hurt
+	/*
+	 * keep chip pin D to low state while reading.
+	 * I'm unsure if it is necessary, but anyway shouldn't hurt
+	 */
 	eprom_w(dev, 0);
 
 	for (i = 0; i < 16; i++) {
-		//eeprom needs a clk cycle between writing opcode&adr
-		//and reading data. (eeprom outs a dummy 0)
+		/*
+		 * eeprom needs a clk cycle between writing opcode&adr
+		 * and reading data. (eeprom outs a dummy 0)
+		 */
 		eprom_ck_cycle(dev);
 		ret |= (eprom_r(dev)<<(15-i));
 	}
@@ -140,7 +146,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
 	eprom_cs(dev, 0);
 	eprom_ck_cycle(dev);
 
-	//disable EPROM programming
+	/* disable EPROM programming */
 	write_nic_byte(dev, EPROM_CMD,
 		       (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
 	return ret;
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/