[PATCH net-next 05/15] drivers/net/bnx2x: Use (pr|netdev|netif)_<level> macro helpers

From: Joe Perches
Date: Wed Feb 17 2010 - 20:06:46 EST

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert struct bnx2x member msglevel to msg_enable for netif_msg_<foo> macros
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Coalesce long formats

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/net/bnx2x.h | 49 +++++++-----
drivers/net/bnx2x_link.c | 21 ++----
drivers/net/bnx2x_main.c | 185 ++++++++++++++++++++-------------------------
3 files changed, 117 insertions(+), 138 deletions(-)

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 602ab86..9f64f79 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -44,7 +44,6 @@
/* error/debug prints */

#define DRV_MODULE_NAME "bnx2x"
-#define PFX DRV_MODULE_NAME ": "

/* for messages that are currently off */
#define BNX2X_MSG_OFF 0
@@ -58,30 +57,40 @@
#define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */

/* regular debug print */
-#define DP(__mask, __fmt, __args...) do { \
- if (bp->msglevel & (__mask)) \
- printk(DP_LEVEL "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
- bp->dev ? (bp->dev->name) : "?", ##__args); \
- } while (0)
+#define DP(__mask, __fmt, __args...) \
+do { \
+ if (bp->msg_enable & (__mask)) \
+ printk(DP_LEVEL "[%s:%d(%s)]" __fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__args); \
+} while (0)

/* errors debug print */
-#define BNX2X_DBG_ERR(__fmt, __args...) do { \
- if (bp->msglevel & NETIF_MSG_PROBE) \
- printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
- bp->dev ? (bp->dev->name) : "?", ##__args); \
- } while (0)
+#define BNX2X_DBG_ERR(__fmt, __args...) \
+do { \
+ if (netif_msg_probe(bp)) \
+ pr_err("[%s:%d(%s)]" __fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__args); \
+} while (0)

/* for errors (never masked) */
-#define BNX2X_ERR(__fmt, __args...) do { \
- printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
- bp->dev ? (bp->dev->name) : "?", ##__args); \
- } while (0)
+#define BNX2X_ERR(__fmt, __args...) \
+do { \
+ pr_err("[%s:%d(%s)]" __fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__args); \
+} while (0)

/* before we have a dev->name use dev_info() */
-#define BNX2X_DEV_INFO(__fmt, __args...) do { \
- if (bp->msglevel & NETIF_MSG_PROBE) \
- dev_info(&bp->pdev->dev, __fmt, ##__args); \
- } while (0)
+#define BNX2X_DEV_INFO(__fmt, __args...) \
+do { \
+ if (netif_msg_probe(bp)) \
+ dev_info(&bp->pdev->dev, __fmt, ##__args); \
+} while (0)


#ifdef BNX2X_STOP_ON_ERROR
@@ -882,7 +891,7 @@ struct bnx2x {
/* End of fields used in the performance code paths */

int panic;
- int msglevel;
+ int msg_enable;

u32 flags;
#define PCIX_FLAG 1
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index cf57789..32e79c3 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -14,6 +14,8 @@
*
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pci.h>
@@ -2987,11 +2989,8 @@ static u8 bnx2x_verify_sfp_module(struct link_params *params)
else
vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0';

- printk(KERN_INFO PFX "Warning: "
- "Unqualified SFP+ module "
- "detected on %s, Port %d from %s part number %s\n"
- , bp->dev->name, params->port,
- vendor_name, vendor_pn);
+ netdev_info(bp->dev, "Warning: Unqualified SFP+ module detected, Port %d from %s part number %s\n",
+ params->port, vendor_name, vendor_pn);
return -EINVAL;
}

@@ -4846,16 +4845,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
" has been detected on "
"port %d\n",
params->port);
- printk(KERN_ERR PFX "Error: Power"
- " fault on %s Port %d has"
- " been detected and the"
- " power to that SFP+ module"
- " has been removed to prevent"
- " failure of the card. Please"
- " remove the SFP+ module and"
- " restart the system to clear"
- " this error.\n"
- , bp->dev->name, params->port);
+ netdev_err(bp->dev, "Error: Power fault on Port %d has been detected and the power to that SFP+ module has been removed to prevent failure of the card. Please remove the SFP+ module and restart the system to clear this error.\n",
+ params->port);
/*
* Disable all RX_ALARMs except for
* mod_abs
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 6d85590..e01675c 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -514,24 +514,24 @@ static void bnx2x_fw_dump(struct bnx2x *bp)

mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
mark = ((mark + 0x3) & ~0x3);
- printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
+ pr_err("begin fw dump (mark 0x%x)\n", mark);

- printk(KERN_ERR PFX);
+ pr_err("");
for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
offset + 4*word));
data[8] = 0x0;
- printk(KERN_CONT "%s", (char *)data);
+ pr_cont("%s", (char *)data);
}
for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
offset + 4*word));
data[8] = 0x0;
- printk(KERN_CONT "%s", (char *)data);
+ pr_cont("%s", (char *)data);
}
- printk(KERN_ERR PFX "end of fw dump\n");
+ pr_err("end of fw dump\n");
}

static void bnx2x_panic_dump(struct bnx2x *bp)
@@ -2136,7 +2136,7 @@ static void bnx2x_link_report(struct bnx2x *bp)
{
if (bp->flags & MF_FUNC_DIS) {
netif_carrier_off(bp->dev);
- printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+ netdev_err(bp->dev, "NIC Link is Down\n");
return;
}

@@ -2145,7 +2145,7 @@ static void bnx2x_link_report(struct bnx2x *bp)

if (bp->state == BNX2X_STATE_OPEN)
netif_carrier_on(bp->dev);
- printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
+ netdev_info(bp->dev, "NIC Link is Up, ");

line_speed = bp->link_vars.line_speed;
if (IS_E1HMF(bp)) {
@@ -2157,29 +2157,29 @@ static void bnx2x_link_report(struct bnx2x *bp)
if (vn_max_rate < line_speed)
line_speed = vn_max_rate;
}
- printk("%d Mbps ", line_speed);
+ pr_cont("%d Mbps ", line_speed);

if (bp->link_vars.duplex == DUPLEX_FULL)
- printk("full duplex");
+ pr_cont("full duplex");
else
- printk("half duplex");
+ pr_cont("half duplex");

if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) {
if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) {
- printk(", receive ");
+ pr_cont(", receive ");
if (bp->link_vars.flow_ctrl &
BNX2X_FLOW_CTRL_TX)
- printk("& transmit ");
+ pr_cont("& transmit ");
} else {
- printk(", transmit ");
+ pr_cont(", transmit ");
}
- printk("flow control ON");
+ pr_cont("flow control ON");
}
- printk("\n");
+ pr_cont("\n");

} else { /* link_down */
netif_carrier_off(bp->dev);
- printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+ netdev_err(bp->dev, "NIC Link is Down\n");
}
}

@@ -2898,10 +2898,8 @@ static inline void bnx2x_fan_failure(struct bnx2x *bp)
bp->link_params.ext_phy_config);

/* log the failure */
- printk(KERN_ERR PFX "Fan Failure on Network Controller %s has caused"
- " the driver to shutdown the card to prevent permanent"
- " damage. Please contact Dell Support for assistance\n",
- bp->dev->name);
+ netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n"
+ "Please contact Dell Support for assistance.\n");
}

static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
@@ -4296,7 +4294,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
bnx2x_net_stats_update(bp);
bnx2x_drv_stats_update(bp);

- if (bp->msglevel & NETIF_MSG_TIMER) {
+ if (netif_msg_timer(bp)) {
struct bnx2x_fastpath *fp0_rx = bp->fp;
struct bnx2x_fastpath *fp0_tx = bp->fp;
struct tstorm_per_client_stats *old_tclient =
@@ -4306,7 +4304,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
struct net_device_stats *nstats = &bp->dev->stats;
int i;

- printk(KERN_DEBUG "%s:\n", bp->dev->name);
+ netdev_printk(KERN_DEBUG, bp->dev, "\n");
printk(KERN_DEBUG " tx avail (%4x) tx hc idx (%x)"
" tx pkt (%lx)\n",
bnx2x_tx_avail(fp0_tx),
@@ -4464,7 +4462,7 @@ static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event)
/* Make sure the state has been "changed" */
smp_wmb();

- if ((event != STATS_EVENT_UPDATE) || (bp->msglevel & NETIF_MSG_TIMER))
+ if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp))
DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
state, event, bp->stats_state);
}
@@ -5674,8 +5672,7 @@ gunzip_nomem2:
bp->gunzip_buf = NULL;

gunzip_nomem1:
- printk(KERN_ERR PFX "%s: Cannot allocate firmware buffer for"
- " un-compression\n", bp->dev->name);
+ netdev_err(bp->dev, "Cannot allocate firmware buffer for un-compression\n");
return -ENOMEM;
}

@@ -5721,14 +5718,13 @@ static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)

rc = zlib_inflate(bp->strm, Z_FINISH);
if ((rc != Z_OK) && (rc != Z_STREAM_END))
- printk(KERN_ERR PFX "%s: Firmware decompression error: %s\n",
- bp->dev->name, bp->strm->msg);
+ netdev_err(bp->dev, "Firmware decompression error: %s\n",
+ bp->strm->msg);

bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out);
if (bp->gunzip_outlen & 0x3)
- printk(KERN_ERR PFX "%s: Firmware decompression error:"
- " gunzip_outlen (%d) not aligned\n",
- bp->dev->name, bp->gunzip_outlen);
+ netdev_err(bp->dev, "Firmware decompression error: gunzip_outlen (%d) not aligned\n",
+ bp->gunzip_outlen);
bp->gunzip_outlen >>= 2;

zlib_inflateEnd(bp->strm);
@@ -6213,8 +6209,8 @@ static int bnx2x_init_common(struct bnx2x *bp)

if (sizeof(union cdu_context) != 1024)
/* we currently assume that a context is 1024 bytes */
- printk(KERN_ALERT PFX "please adjust the size of"
- " cdu_context(%ld)\n", (long)sizeof(union cdu_context));
+ pr_alert("please adjust the size of cdu_context(%ld)\n",
+ (long)sizeof(union cdu_context));

bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
val = (4 << 24) + (0 << 12) + 1024;
@@ -7018,11 +7014,10 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
}

i = BNX2X_NUM_QUEUES(bp);
- printk(KERN_INFO PFX "%s: using MSI-X IRQs: sp %d fp[%d] %d"
- " ... fp[%d] %d\n",
- bp->dev->name, bp->msix_table[0].vector,
- 0, bp->msix_table[offset].vector,
- i - 1, bp->msix_table[offset + i - 1].vector);
+ netdev_info(bp->dev, "using MSI-X IRQs: sp %d fp[%d] %d ... fp[%d] %d\n",
+ bp->msix_table[0].vector,
+ 0, bp->msix_table[offset].vector,
+ i - 1, bp->msix_table[offset + i - 1].vector);

return 0;
}
@@ -7477,8 +7472,8 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
}
if (bp->flags & USING_MSI_FLAG) {
bp->dev->irq = bp->pdev->irq;
- printk(KERN_INFO PFX "%s: using MSI IRQ %d\n",
- bp->dev->name, bp->pdev->irq);
+ netdev_info(bp->dev, "using MSI IRQ %d\n",
+ bp->pdev->irq);
}
}

@@ -8297,8 +8292,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]);
val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]);

- printk(KERN_INFO PFX "part number %X-%X-%X-%X\n",
- val, val2, val3, val4);
+ pr_info("part number %X-%X-%X-%X\n", val, val2, val3, val4);
}

static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
@@ -8909,17 +8903,15 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
bnx2x_undi_unload(bp);

if (CHIP_REV_IS_FPGA(bp))
- printk(KERN_ERR PFX "FPGA detected\n");
+ pr_err("FPGA detected\n");

if (BP_NOMCP(bp) && (func == 0))
- printk(KERN_ERR PFX
- "MCP disabled, must load devices in order!\n");
+ pr_err("MCP disabled, must load devices in order!\n");

/* Set multi queue mode */
if ((multi_mode != ETH_RSS_MODE_DISABLED) &&
((int_mode == INT_MODE_INTx) || (int_mode == INT_MODE_MSI))) {
- printk(KERN_ERR PFX
- "Multi disabled since int_mode requested is not MSI-X\n");
+ pr_err("Multi disabled since int_mode requested is not MSI-X\n");
multi_mode = ETH_RSS_MODE_DISABLED;
}
bp->multi_mode = multi_mode;
@@ -9345,7 +9337,7 @@ static u32 bnx2x_get_msglevel(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);

- return bp->msglevel;
+ return bp->msg_enable;
}

static void bnx2x_set_msglevel(struct net_device *dev, u32 level)
@@ -9353,7 +9345,7 @@ static void bnx2x_set_msglevel(struct net_device *dev, u32 level)
struct bnx2x *bp = netdev_priv(dev);

if (capable(CAP_NET_ADMIN))
- bp->msglevel = level;
+ bp->msg_enable = level;
}

static int bnx2x_nway_reset(struct net_device *dev)
@@ -10644,7 +10636,7 @@ static const struct {
((bnx2x_stats_arr[i].flags & STATS_FLAGS_BOTH) == STATS_FLAGS_PORT)
#define IS_FUNC_STAT(i) (bnx2x_stats_arr[i].flags & STATS_FLAGS_FUNC)
#define IS_E1HMF_MODE_STAT(bp) \
- (IS_E1HMF(bp) && !(bp->msglevel & BNX2X_MSG_STATS))
+ (IS_E1HMF(bp) && !(bp->msg_enable & BNX2X_MSG_STATS))

static int bnx2x_get_sset_count(struct net_device *dev, int stringset)
{
@@ -11777,20 +11769,18 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,

rc = pci_enable_device(pdev);
if (rc) {
- printk(KERN_ERR PFX "Cannot enable PCI device, aborting\n");
+ pr_err("Cannot enable PCI device, aborting\n");
goto err_out;
}

if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
- printk(KERN_ERR PFX "Cannot find PCI device base address,"
- " aborting\n");
+ pr_err("Cannot find PCI device base address, aborting\n");
rc = -ENODEV;
goto err_out_disable;
}

if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
- printk(KERN_ERR PFX "Cannot find second PCI device"
- " base address, aborting\n");
+ pr_err("Cannot find second PCI device base address, aborting\n");
rc = -ENODEV;
goto err_out_disable;
}
@@ -11798,8 +11788,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
if (atomic_read(&pdev->enable_cnt) == 1) {
rc = pci_request_regions(pdev, DRV_MODULE_NAME);
if (rc) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources,"
- " aborting\n");
+ pr_err("Cannot obtain PCI resources, aborting\n");
goto err_out_disable;
}

@@ -11809,16 +11798,14 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,

bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (bp->pm_cap == 0) {
- printk(KERN_ERR PFX "Cannot find power management"
- " capability, aborting\n");
+ pr_err("Cannot find power management capability, aborting\n");
rc = -EIO;
goto err_out_release;
}

bp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (bp->pcie_cap == 0) {
- printk(KERN_ERR PFX "Cannot find PCI Express capability,"
- " aborting\n");
+ pr_err("Cannot find PCI Express capability, aborting\n");
rc = -EIO;
goto err_out_release;
}
@@ -11826,15 +11813,13 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
bp->flags |= USING_DAC_FLAG;
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
- printk(KERN_ERR PFX "pci_set_consistent_dma_mask"
- " failed, aborting\n");
+ pr_err("pci_set_consistent_dma_mask failed, aborting\n");
rc = -EIO;
goto err_out_release;
}

} else if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
- printk(KERN_ERR PFX "System does not support DMA,"
- " aborting\n");
+ pr_err("System does not support DMA, aborting\n");
rc = -EIO;
goto err_out_release;
}
@@ -11847,7 +11832,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,

bp->regview = pci_ioremap_bar(pdev, 0);
if (!bp->regview) {
- printk(KERN_ERR PFX "Cannot map register space, aborting\n");
+ pr_err("Cannot map register space, aborting\n");
rc = -ENOMEM;
goto err_out_release;
}
@@ -11856,7 +11841,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
min_t(u64, BNX2X_DB_SIZE,
pci_resource_len(pdev, 2)));
if (!bp->doorbells) {
- printk(KERN_ERR PFX "Cannot map doorbell space, aborting\n");
+ pr_err("Cannot map doorbell space, aborting\n");
rc = -ENOMEM;
goto err_out_unmap;
}
@@ -11958,8 +11943,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
offset = be32_to_cpu(sections[i].offset);
len = be32_to_cpu(sections[i].len);
if (offset + len > firmware->size) {
- printk(KERN_ERR PFX "Section %d length is out of "
- "bounds\n", i);
+ pr_err("Section %d length is out of bounds\n", i);
return -EINVAL;
}
}
@@ -11971,8 +11955,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp)

for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
if (be16_to_cpu(ops_offsets[i]) > num_ops) {
- printk(KERN_ERR PFX "Section offset %d is out of "
- "bounds\n", i);
+ pr_err("Section offset %d is out of bounds\n", i);
return -EINVAL;
}
}
@@ -11984,8 +11967,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
(fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
(fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
(fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
- printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d."
- " Should be %d.%d.%d.%d\n",
+ pr_err("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
fw_ver[0], fw_ver[1], fw_ver[2],
fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
BCM_5710_FW_MINOR_VERSION,
@@ -12035,18 +12017,17 @@ static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
target[i] = be16_to_cpu(source[i]);
}

-#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
- do { \
- u32 len = be32_to_cpu(fw_hdr->arr.len); \
- bp->arr = kmalloc(len, GFP_KERNEL); \
- if (!bp->arr) { \
- printk(KERN_ERR PFX "Failed to allocate %d bytes " \
- "for "#arr"\n", len); \
- goto lbl; \
- } \
- func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
- (u8 *)bp->arr, len); \
- } while (0)
+#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
+do { \
+ u32 len = be32_to_cpu(fw_hdr->arr.len); \
+ bp->arr = kmalloc(len, GFP_KERNEL); \
+ if (!bp->arr) { \
+ pr_err("Failed to allocate %d bytes for "#arr"\n", len); \
+ goto lbl; \
+ } \
+ func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
+ (u8 *)bp->arr, len); \
+} while (0)

static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
{
@@ -12059,18 +12040,17 @@ static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
else
fw_file_name = FW_FILE_NAME_E1H;

- printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
+ pr_info("Loading %s\n", fw_file_name);

rc = request_firmware(&bp->firmware, fw_file_name, dev);
if (rc) {
- printk(KERN_ERR PFX "Can't load firmware file %s\n",
- fw_file_name);
+ pr_err("Can't load firmware file %s\n", fw_file_name);
goto request_firmware_exit;
}

rc = bnx2x_check_firmware(bp);
if (rc) {
- printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name);
+ pr_err("Corrupt firmware file %s\n", fw_file_name);
goto request_firmware_exit;
}

@@ -12129,12 +12109,12 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
/* dev zeroed in init_etherdev */
dev = alloc_etherdev_mq(sizeof(*bp), MAX_CONTEXT);
if (!dev) {
- printk(KERN_ERR PFX "Cannot allocate net device\n");
+ pr_err("Cannot allocate net device\n");
return -ENOMEM;
}

bp = netdev_priv(dev);
- bp->msglevel = debug;
+ bp->msg_enable = debug;

pci_set_drvdata(pdev, dev);

@@ -12151,7 +12131,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
/* Set init arrays */
rc = bnx2x_init_firmware(bp, &pdev->dev);
if (rc) {
- printk(KERN_ERR PFX "Error loading firmware\n");
+ pr_err("Error loading firmware\n");
goto init_one_exit;
}

@@ -12162,12 +12142,11 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
}

bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
- printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
- " IRQ %d, ", dev->name, board_info[ent->driver_data].name,
- (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
- pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz",
- dev->base_addr, bp->pdev->irq);
- printk(KERN_CONT "node addr %pM\n", dev->dev_addr);
+ netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
+ board_info[ent->driver_data].name,
+ (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+ pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz",
+ dev->base_addr, bp->pdev->irq, dev->dev_addr);

return 0;

@@ -12195,7 +12174,7 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
struct bnx2x *bp;

if (!dev) {
- printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+ pr_err("BAD net device from bnx2x_init_one\n");
return;
}
bp = netdev_priv(dev);
@@ -12228,7 +12207,7 @@ static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
struct bnx2x *bp;

if (!dev) {
- printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+ pr_err("BAD net device from bnx2x_init_one\n");
return -ENODEV;
}
bp = netdev_priv(dev);
@@ -12260,7 +12239,7 @@ static int bnx2x_resume(struct pci_dev *pdev)
int rc;

if (!dev) {
- printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+ pr_err("BAD net device from bnx2x_init_one\n");
return -ENODEV;
}
bp = netdev_priv(dev);
@@ -12463,17 +12442,17 @@ static int __init bnx2x_init(void)
{
int ret;

- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);

bnx2x_wq = create_singlethread_workqueue("bnx2x");
if (bnx2x_wq == NULL) {
- printk(KERN_ERR PFX "Cannot create workqueue\n");
+ pr_err("Cannot create workqueue\n");
return -ENOMEM;
}

ret = pci_register_driver(&bnx2x_pci_driver);
if (ret) {
- printk(KERN_ERR PFX "Cannot register driver\n");
+ pr_err("Cannot register driver\n");
destroy_workqueue(bnx2x_wq);
}
return ret;
--
1.7.0.14.g7e948

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/