Re: [PATCH net-next 14/15] drivers/net/typhoon.c: Use(pr|netdev)_<level> macro helpers
From: Joe Perches
Date: Wed Feb 17 2010 - 21:18:31 EST
On Wed, 2010-02-17 at 20:59 -0500, David Dillow wrote:
> On Wed, 2010-02-17 at 17:02 -0800, Joe Perches wrote:
> > Use pr_<level>
> > Use netdev_<level>
>
> The way the driver uses tp->name, most of the pr_<level> changes add an
> extraneous "typhoon:" to the front of the messages, which is not
> desirable. Your absolute change-over from PFX/ERR_PFX to pr_fmt()
> KBUILD_MODNAME misses the distinction between the message where the
> prefix is needed, and where it isn't.
Doesn't that mean that "%s: ...", tp->name should be removed?
> The netdev_<level> changes are much more palatable to me than the
> pr_<level> ones. I have no problem getting behind those.
>
> > Coalesce long formats
>
> I don't like these changes very much, either. I tend to work in 80 char
> terminals, and the wrap of a few characters is usually annoying.
Linus prefers formats not be split across multiple lines.
http://lkml.org/lkml/2008/2/23/251
I can change it back if you want, no matter to me.
> I don't have very much to do on this driver these days, so I'll defer to
> others on this issue. However, if you're going to be reformatting
> things, please pull things up a line when you shorten things enough to
> fit.
I try do that when I see it.
I prefer to use arguments on a separate line when all arguments
don't fit on a single one.
> But not here -- perhaps an 80 char limit, I've not looked at the patched
> file:
>
> > @@ -1492,7 +1490,7 @@ typhoon_download_firmware(struct typhoon *tp)
> > if(typhoon_wait_interrupt(ioaddr) < 0 ||
> > ioread32(ioaddr + TYPHOON_REG_STATUS) !=
> > TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
> > - printk(KERN_ERR "%s: segment ready timeout\n",
> > + pr_err("%s: segment ready timeout\n",
> > tp->name);
Doesn't fit tp->name on 80 cols
> These __func__ conversions need to go.
>
> > @@ -1901,16 +1898,16 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
> > xp_cmd.parm1 = events;
> > err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
> > if(err < 0) {
> > - printk(KERN_ERR "%s: typhoon_sleep(): wake events cmd err %d\n",
> > - tp->name, err);
> > + pr_err("%s: %s(): wake events cmd err %d\n",
> > + tp->name, __func__, err);
> > return err;
> > }
why? It makes it harder to get the function name wrong if
it's rewritten.
> Pull up tp->name?
> > @@ -2089,11 +2085,11 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
> > typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
> >
> > if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
> > - printk(KERN_ERR "%s: timed out waiting for 3XP to halt\n",
> > + pr_err("%s: timed out waiting for 3XP to halt\n",
> > tp->name);
>
> Please don't change this printk(), or change the version string, as
> you'll have a redundant "typhoon:" in there now.
How about something like this (on top of previous)?
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 843f986..6fa887a 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -136,7 +136,7 @@ static const int multicast_filter_limit = 32;
#include "typhoon.h"
static char version[] __devinitdata =
- "typhoon.c: version " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+ "version " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("David Dillow <dave@xxxxxxxxxxxxxx>");
MODULE_VERSION(DRV_MODULE_VERSION);
@@ -534,8 +534,8 @@ typhoon_process_response(struct typhoon *tp, int resp_size,
} else if(resp->cmd == TYPHOON_CMD_HELLO_RESP) {
typhoon_hello(tp);
} else {
- pr_err("%s: dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
- tp->name, le16_to_cpu(resp->cmd),
+ pr_err("dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
+ le16_to_cpu(resp->cmd),
resp->numDesc, resp->flags,
le16_to_cpu(resp->parm1),
le32_to_cpu(resp->parm2),
@@ -605,8 +605,8 @@ typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
freeResp = typhoon_num_free_resp(tp);
if(freeCmd < num_cmd || freeResp < num_resp) {
- pr_err("%s: no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
- tp->name, freeCmd, num_cmd, freeResp, num_resp);
+ pr_err("no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
+ freeCmd, num_cmd, freeResp, num_resp);
err = -ENOMEM;
goto out;
}
@@ -731,7 +731,7 @@ typhoon_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
spin_unlock_bh(&tp->state_lock);
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0)
- printk("%s: vlan offload error %d\n", tp->name, -err);
+ pr_err("vlan offload error %d\n", -err);
spin_lock_bh(&tp->state_lock);
}
@@ -1364,8 +1364,7 @@ typhoon_request_firmware(struct typhoon *tp)
err = request_firmware(&typhoon_fw, FIRMWARE_NAME, &tp->pdev->dev);
if (err) {
- pr_err("%s: Failed to load firmware \"%s\"\n",
- tp->name, FIRMWARE_NAME);
+ pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME);
return err;
}
@@ -1400,7 +1399,7 @@ typhoon_request_firmware(struct typhoon *tp)
return 0;
invalid_fw:
- pr_err("%s: Invalid firmware image\n", tp->name);
+ pr_err("Invalid firmware image\n");
release_firmware(typhoon_fw);
typhoon_fw = NULL;
return -EINVAL;
@@ -1437,7 +1436,7 @@ typhoon_download_firmware(struct typhoon *tp)
err = -ENOMEM;
dpage = pci_alloc_consistent(pdev, PAGE_SIZE, &dpage_dma);
if(!dpage) {
- pr_err("%s: no DMA mem for firmware\n", tp->name);
+ pr_err("no DMA mem for firmware\n");
goto err_out;
}
@@ -1450,7 +1449,7 @@ typhoon_download_firmware(struct typhoon *tp)
err = -ETIMEDOUT;
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
- pr_err("%s: card ready timeout\n", tp->name);
+ pr_err("card ready timeout\n");
goto err_out_irq;
}
@@ -1490,8 +1489,7 @@ typhoon_download_firmware(struct typhoon *tp)
if(typhoon_wait_interrupt(ioaddr) < 0 ||
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
- pr_err("%s: segment ready timeout\n",
- tp->name);
+ pr_err("segment ready timeout\n");
goto err_out_irq;
}
@@ -1524,15 +1522,15 @@ typhoon_download_firmware(struct typhoon *tp)
if(typhoon_wait_interrupt(ioaddr) < 0 ||
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
- pr_err("%s: final segment ready timeout\n", tp->name);
+ pr_err("final segment ready timeout\n");
goto err_out_irq;
}
iowrite32(TYPHOON_BOOTCMD_DNLD_COMPLETE, ioaddr + TYPHOON_REG_COMMAND);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
- pr_err("%s: boot ready timeout, status 0x%0x\n",
- tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
+ pr_err("boot ready timeout, status 0x%0x\n",
+ ioread32(ioaddr + TYPHOON_REG_STATUS));
goto err_out_irq;
}
@@ -1554,7 +1552,7 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
void __iomem *ioaddr = tp->ioaddr;
if(typhoon_wait_status(ioaddr, initial_status) < 0) {
- pr_err("%s: boot ready timeout\n", tp->name);
+ pr_err("boot ready timeout\n");
goto out_timeout;
}
@@ -1565,8 +1563,8 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
ioaddr + TYPHOON_REG_COMMAND);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_RUNNING) < 0) {
- pr_err("%s: boot finish timeout (status 0x%x)\n",
- tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
+ pr_err("boot finish timeout (status 0x%x)\n",
+ ioread32(ioaddr + TYPHOON_REG_STATUS));
goto out_timeout;
}
@@ -1898,16 +1896,16 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
xp_cmd.parm1 = events;
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0) {
- pr_err("%s: %s(): wake events cmd err %d\n",
- tp->name, __func__, err);
+ pr_err("%s(): wake events cmd err %d\n",
+ __func__, err);
return err;
}
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_GOTO_SLEEP);
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0) {
- pr_err("%s: %s(): sleep cmd err %d\n",
- tp->name, __func__, err);
+ pr_err("%s(): sleep cmd err %d\n",
+ __func__, err);
return err;
}
@@ -1958,12 +1956,12 @@ typhoon_start_runtime(struct typhoon *tp)
err = typhoon_download_firmware(tp);
if(err < 0) {
- printk("%s: cannot load runtime on 3XP\n", tp->name);
+ pr_err("cannot load runtime on 3XP\n");
goto error_out;
}
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
- printk("%s: cannot boot 3XP\n", tp->name);
+ pr_err("cannot boot 3XP\n");
err = -EIO;
goto error_out;
}
@@ -2067,8 +2065,7 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
}
if(i == TYPHOON_WAIT_TIMEOUT)
- pr_err("%s: halt timed out waiting for Tx to complete\n",
- tp->name);
+ pr_err("halt timed out waiting for Tx to complete\n");
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_DISABLE);
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
@@ -2085,11 +2082,10 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
- pr_err("%s: timed out waiting for 3XP to halt\n",
- tp->name);
+ pr_err("timed out waiting for 3XP to halt\n");
if(typhoon_reset(ioaddr, wait_type) < 0) {
- pr_err("%s: unable to reset 3XP\n", tp->name);
+ pr_err("unable to reset 3XP\n");
return -ETIMEDOUT;
}
@@ -2376,8 +2372,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev = alloc_etherdev(sizeof(*tp));
if(dev == NULL) {
- pr_err("%s: unable to alloc new net device\n",
- pci_name(pdev));
+ pr_err("%s: unable to alloc new net device\n", pci_name(pdev));
err = -ENOMEM;
goto error_out;
}
@@ -2385,8 +2380,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_enable_device(pdev);
if(err < 0) {
- pr_err("%s: unable to enable device\n",
- pci_name(pdev));
+ pr_err("%s: unable to enable device\n", pci_name(pdev));
goto error_out_dev;
}
@@ -2398,8 +2392,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if(err < 0) {
- pr_err("%s: No usable DMA configuration\n",
- pci_name(pdev));
+ pr_err("%s: No usable DMA configuration\n", pci_name(pdev));
goto error_out_mwi;
}
@@ -2432,8 +2425,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_request_regions(pdev, "typhoon");
if(err < 0) {
- pr_err("%s: could not request regions\n",
- pci_name(pdev));
+ pr_err("%s: could not request regions\n", pci_name(pdev));
goto error_out_mwi;
}
@@ -2455,8 +2447,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
shared = pci_alloc_consistent(pdev, sizeof(struct typhoon_shared),
&shared_dma);
if(!shared) {
- pr_err("%s: could not allocate DMA memory\n",
- pci_name(pdev));
+ pr_err("%s: could not allocate DMA memory\n", pci_name(pdev));
err = -ENOMEM;
goto error_out_remap;
}
@@ -2493,7 +2484,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* dev->name is not valid until we register, but we need to
* use some common routines to initialize the card. So that those
- * routines print the right name, we keep our oun pointer to the name
+ * routines print the right name, we keep our own pointer to the name
*/
tp->name = pci_name(pdev);
@@ -2501,16 +2492,14 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
typhoon_init_rings(tp);
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
- pr_err("%s: cannot boot 3XP sleep image\n",
- pci_name(pdev));
+ pr_err("%s: cannot boot 3XP sleep image\n", pci_name(pdev));
err = -EIO;
goto error_out_reset;
}
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS);
if(typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp) < 0) {
- pr_err("%s: cannot read MAC address\n",
- pci_name(pdev));
+ pr_err("%s: cannot read MAC address\n", pci_name(pdev));
err = -EIO;
goto error_out_reset;
}
@@ -2530,7 +2519,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
pr_err("%s: Could not get Sleep Image version\n",
- pci_name(pdev));
+ pci_name(pdev));
goto error_out_reset;
}
@@ -2547,8 +2536,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET;
if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) {
- pr_err("%s: cannot put adapter to sleep\n",
- pci_name(pdev));
+ pr_err("%s: cannot put adapter to sleep\n", pci_name(pdev));
err = -EIO;
goto error_out_reset;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/