HPET Warning on kernel 2.6.32.8 and 2.6.33-rc8 on Core i7 on P55chipset
From: Malte SchrÃder
Date: Sun Feb 21 2010 - 04:01:36 EST
Hello list,
around timestamp 4.373458 I see a backtrace while booting. I just
upraded my system to a core i7 with p55 chipset (Intel DG55WG
mainboard).
Besides this warning during boot I'd like to mention that the system or
maybe just the X-server freezes after some time. But that might be just
the fault of Nvidia's binary driver.
Attached is my kernel config, the output of lspci -nn and dmesg:
I hope someone can help.
--
---------------------------------------
Malte SchrÃder
MalteSch@xxxxxx
ICQ# 68121508
---------------------------------------
Attachment:
config-2.6.33-rc8
Description: Binary data
[ 0.000000] Linux version 2.6.33-rc8-highlander (root@highlander) (gcc version 4.4.3 (Debian 4.4.3-2) ) #4 SMP Wed Feb 17 19:15:04 CET 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.33-rc8-highlander root=UUID=82b02c53-993a-49b6-87a5-d416cfa2e5fd ro rootfstype=ext4 rootflags=relatime,journal_async_commit
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf671000 (usable)
[ 0.000000] BIOS-e820: 00000000bf671000 - 00000000bf6bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf6bf000 - 00000000bf6e6000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6e6000 - 00000000bf7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7bf000 - 00000000bf7e6000 (usable)
[ 0.000000] BIOS-e820: 00000000bf7e6000 - 00000000bf7f1000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7f1000 - 00000000bf7f2000 (usable)
[ 0.000000] BIOS-e820: 00000000bf7f2000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask F00000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ a000-14000
[ 0.000000] RAMDISK: 37b82000 - 37fef1bc
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 00000000bf7fd120 00074 (v01 INTEL KBIBX10J 0000119B 01000013)
[ 0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v03 INTEL KBIBX10J 0000119B MSFT 0100000D)
[ 0.000000] ACPI: DSDT 00000000bf7f8000 03D07 (v02 INTEL KBIBX10J 0000119B MSFT 0100000D)
[ 0.000000] ACPI: FACS 00000000bf76c000 00040
[ 0.000000] ACPI: APIC 00000000bf7f7000 000BC (v02 INTEL KBIBX10J 0000119B MSFT 0100000D)
[ 0.000000] ACPI: WDDT 00000000bf7f6000 00040 (v01 INTEL KBIBX10J 0000119B MSFT 0100000D)
[ 0.000000] ACPI: MCFG 00000000bf7f5000 0003C (v01 INTEL KBIBX10J 0000119B MSFT 0100000D)
[ 0.000000] ACPI: ASF! 00000000bf7f4000 000A5 (v32 INTEL KBIBX10J 0000119B MSFT 0100000D)
[ 0.000000] ACPI: HPET 00000000bf7f3000 00038 (v01 INTEL KBIBX10J 0000119B MSFT 0100000D)
[ 0.000000] ACPI: WDTx 00000000bf7f0000 00224 (v02 INTEL KBIBX10J 0000119B MSFT 0100000D)
[ 0.000000] ACPI: SSDT 00000000bf7e8000 0772C (v01 INTEL SSDT PM 0000119B MSFT 0100000D)
[ 0.000000] ACPI: DMAR 00000000bf7e6000 00080 (v01 INTEL KBIBX10J 0000119B MSFT 0100000D)
[ 0.000000] ACPI: ASPT 00000000bf7f2000 00034 (v05 INTEL PerfTune 0000119B MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0240000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 00013d475c] TEXT DATA BSS ==> [0001000000 - 00013d475c]
[ 0.000000] #2 [0037b82000 - 0037fef1bc] RAMDISK ==> [0037b82000 - 0037fef1bc]
[ 0.000000] #3 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
[ 0.000000] #4 [00013d5000 - 00013d515e] BRK ==> [00013d5000 - 00013d515e]
[ 0.000000] #5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
[ 0.000000] #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #8 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000008f
[ 0.000000] 0: 0x00000100 -> 0x000bf671
[ 0.000000] 0: 0x000bf6bf -> 0x000bf6e6
[ 0.000000] 0: 0x000bf7bf -> 0x000bf7e6
[ 0.000000] 0: 0x000bf7f1 -> 0x000bf7f2
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2094672
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 113 pages reserved
[ 0.000000] DMA zone: 3814 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765689 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf671000 - 00000000bf6bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf6e6000 - 00000000bf7bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e6000 - 00000000bf7f1000
[ 0.000000] PM: Registered nosave memory: 00000000bf7f2000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880028200000 s76440 r8192 d21864 u262144
[ 0.000000] pcpu-alloc: s76440 r8192 d21864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062303
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.33-rc8-highlander root=UUID=82b02c53-993a-49b6-87a5-d416cfa2e5fd ro rootfstype=ext4 rootflags=relatime,journal_async_commit
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8175184k/9437184k available (2019k kernel code, 1058496k absent, 202544k reserved, 1173k data, 372k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2800.100 MHz processor.
[ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.20 BogoMIPS (lpj=2800100)
[ 0.000274] Mount-cache hash table entries: 256
[ 0.000479] CPU: Physical Processor ID: 0
[ 0.000599] CPU: Processor Core ID: 0
[ 0.000721] mce: CPU supports 9 MCE banks
[ 0.000846] CPU0: Thermal monitoring enabled (TM1)
[ 0.000969] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.001729] using mwait in idle threads.
[ 0.001849] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.002183] ... version: 3
[ 0.002304] ... bit width: 48
[ 0.002432] ... generic registers: 4
[ 0.002553] ... value mask: 0000ffffffffffff
[ 0.002674] ... max period: 000000007fffffff
[ 0.002795] ... fixed-purpose events: 3
[ 0.002915] ... event mask: 000000070000000f
[ 0.003044] ACPI: Core revision 20091214
[ 0.012827] DMAR: Host address width 36
[ 0.012948] DMAR: DRHD base: 0x000000fe710000 flags: 0x1
[ 0.013075] IOMMU fe710000: ver 1:0 cap c90780106f0462 ecap f020a2
[ 0.013199] DMAR: RMRR base: 0x000000bf69d000 end: 0x000000bf69dfff
[ 0.013337] DMAR: RMRR base: 0x000000bf699000 end: 0x000000bf699fff
[ 0.013475] Setting APIC routing to flat
[ 0.013976] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024080] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.126147] Booting Node 0, Processors #1
[ 0.196975] CPU 1 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.217035] #2
[ 0.287783] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.307875] #3
[ 0.378590] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.398673] #4
[ 0.469398] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.489513] #5
[ 0.560205] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.580263] #6
[ 0.651014] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.671107] #7 Ok.
[ 0.741821] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.761845] Brought up 8 CPUs
[ 0.762086] Total of 8 processors activated (44794.16 BogoMIPS).
[ 0.764878] NET: Registered protocol family 16
[ 0.765090] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.765229] ACPI: bus type pci registered
[ 0.771192] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.771331] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.773109] PCI: Using configuration type 1 for base access
[ 0.773890] bio: create slab <bio-0> at 0
[ 0.774723] ACPI: EC: Look up EC in DSDT
[ 0.781778] ACPI: Interpreter enabled
[ 0.781902] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.782559] ACPI: Using IOAPIC for interrupt routing
[ 0.786243] ACPI: No dock devices found.
[ 0.786608] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.786755] pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.787161] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.787163] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.787165] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.787167] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xf7ffffff] (ignored)
[ 0.787244] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.787246] pci 0000:00:03.0: PME# disabled
[ 0.787481] pci 0000:00:19.0: reg 10: [mem 0xea200000-0xea21ffff]
[ 0.787490] pci 0000:00:19.0: reg 14: [mem 0xea224000-0xea224fff]
[ 0.787498] pci 0000:00:19.0: reg 18: [io 0x2040-0x205f]
[ 0.787535] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.787542] pci 0000:00:19.0: PME# disabled
[ 0.787585] pci 0000:00:1a.0: reg 10: [mem 0xc0002000-0xc00023ff]
[ 0.787639] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.787647] pci 0000:00:1a.0: PME# disabled
[ 0.787683] pci 0000:00:1b.0: reg 10: [mem 0xea220000-0xea223fff 64bit]
[ 0.787727] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.787734] pci 0000:00:1b.0: PME# disabled
[ 0.787806] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.787813] pci 0000:00:1c.0: PME# disabled
[ 0.787882] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.787889] pci 0000:00:1c.4: PME# disabled
[ 0.787957] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.787964] pci 0000:00:1c.6: PME# disabled
[ 0.788004] pci 0000:00:1d.0: reg 10: [mem 0xc0003000-0xc00033ff]
[ 0.788059] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.788066] pci 0000:00:1d.0: PME# disabled
[ 0.788225] pci 0000:00:1f.2: reg 10: [io 0x2068-0x206f]
[ 0.788234] pci 0000:00:1f.2: reg 14: [io 0x2074-0x2077]
[ 0.788243] pci 0000:00:1f.2: reg 18: [io 0x2060-0x2067]
[ 0.788251] pci 0000:00:1f.2: reg 1c: [io 0x2070-0x2073]
[ 0.788260] pci 0000:00:1f.2: reg 20: [io 0x2020-0x203f]
[ 0.788268] pci 0000:00:1f.2: reg 24: [mem 0xea225000-0xea2257ff]
[ 0.788299] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.788305] pci 0000:00:1f.2: PME# disabled
[ 0.788336] pci 0000:00:1f.3: reg 10: [mem 0xea226000-0xea2260ff 64bit]
[ 0.788351] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f]
[ 0.788392] pci 0000:01:00.0: reg 10: [mem 0xe9000000-0xe9ffffff]
[ 0.788399] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.788406] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.788411] pci 0000:01:00.0: reg 24: [io 0x1000-0x107f]
[ 0.788415] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.788454] pci 0000:01:00.1: reg 10: [mem 0xea000000-0xea003fff]
[ 0.788510] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.788638] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff]
[ 0.788641] pci 0000:00:03.0: bridge window [mem 0xe9000000-0xea0fffff]
[ 0.788644] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.788771] pci 0000:02:00.0: reg 10: [mem 0xe8200000-0xe820ffff 64bit]
[ 0.788816] pci 0000:02:00.0: reg 18: [mem 0xe8000000-0xe81fffff 64bit]
[ 0.788863] pci 0000:02:00.0: reg 20: [mem 0xe4000000-0xe7ffffff 64bit]
[ 0.789092] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.789215] pci 0000:00:1c.0: bridge window [mem 0xe4000000-0xe82fffff]
[ 0.789257] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.789423] pci 0000:00:1c.6: PCI bridge to [bus 04-04]
[ 0.789581] pci 0000:05:03.0: reg 10: [mem 0xea104000-0xea1047ff]
[ 0.789591] pci 0000:05:03.0: reg 14: [mem 0xea100000-0xea103fff]
[ 0.789633] pci 0000:05:03.0: supports D1 D2
[ 0.789634] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.789642] pci 0000:05:03.0: PME# disabled
[ 0.789682] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.789818] pci 0000:00:1e.0: bridge window [mem 0xea100000-0xea1fffff]
[ 0.789843] pci_bus 0000:00: on NUMA node 0
[ 0.789846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.790148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.790259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.790311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.790359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 0.790417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
[ 0.794720] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.795968] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.797439] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.798694] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.799951] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.801191] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.802661] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.803906] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.805174] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.805307] vgaarb: loaded
[ 0.805499] PCI: Using ACPI for IRQ routing
[ 0.805614] PCI: pci_cache_line_size set to 64 bytes
[ 0.805786] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.805915] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 0.806969] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.809693] hpet: hpet2 irq 24 for MSI
[ 0.809779] hpet: hpet3 irq 25 for MSI
[ 0.810821] hpet: hpet4 irq 26 for MSI
[ 0.811808] hpet: hpet5 irq 27 for MSI
[ 0.812856] hpet: hpet6 irq 28 for MSI
[ 0.814759] Switching to clocksource tsc
[ 0.815036] pnp: PnP ACPI init
[ 0.815160] ACPI: bus type pnp registered
[ 0.816230] pnp: PnP ACPI: found 10 devices
[ 0.816351] ACPI: ACPI bus type pnp unregistered
[ 0.816477] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.816601] system 00:01: [mem 0xfeb00000-0xfeb03fff] has been reserved
[ 0.816727] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.816854] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.816970] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.817096] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.817222] system 00:01: [mem 0xfed1a000-0xfed1afff] has been reserved
[ 0.817348] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.817471] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.817596] system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved
[ 0.817722] system 00:01: [mem 0x000c0000-0x000dffff] has been reserved
[ 0.817849] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.817973] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.818101] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.818227] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.818351] system 00:06: [io 0x0680-0x06ff] has been reserved
[ 0.823280] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.823452] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.823591] pci 0000:00:1c.4: BAR 8: assigned [mem 0xc0300000-0xc04fffff]
[ 0.823714] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
[ 0.823856] pci 0000:00:1c.6: BAR 8: assigned [mem 0xc0700000-0xc08fffff]
[ 0.823978] pci 0000:00:1c.6: BAR 9: assigned [mem 0xc0900000-0xc0afffff 64bit pref]
[ 0.824117] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.824241] pci 0000:00:1c.4: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.824365] pci 0000:00:1c.6: BAR 7: assigned [io 0x5000-0x5fff]
[ 0.824489] pci 0000:01:00.0: BAR 6: assigned [mem 0xea080000-0xea0fffff pref]
[ 0.824626] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.824751] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff]
[ 0.824877] pci 0000:00:03.0: bridge window [mem 0xe9000000-0xea0fffff]
[ 0.825001] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.825142] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.825266] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.825392] pci 0000:00:1c.0: bridge window [mem 0xe4000000-0xe82fffff]
[ 0.825520] pci 0000:00:1c.0: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.825661] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.825788] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.825914] pci 0000:00:1c.4: bridge window [mem 0xc0300000-0xc04fffff]
[ 0.826037] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
[ 0.826181] pci 0000:00:1c.6: PCI bridge to [bus 04-04]
[ 0.826309] pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
[ 0.826439] pci 0000:00:1c.6: bridge window [mem 0xc0700000-0xc08fffff]
[ 0.826567] pci 0000:00:1c.6: bridge window [mem 0xc0900000-0xc0afffff 64bit pref]
[ 0.826712] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.826835] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.826962] pci 0000:00:1e.0: bridge window [mem 0xea100000-0xea1fffff]
[ 0.827089] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.827222] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.827347] pci 0000:00:03.0: setting latency timer to 64
[ 0.827359] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.827485] pci 0000:00:1c.0: setting latency timer to 64
[ 0.827495] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.827621] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.827748] pci 0000:00:1c.4: setting latency timer to 64
[ 0.827757] pci 0000:00:1c.6: enabling device (0000 -> 0003)
[ 0.827890] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.828018] pci 0000:00:1c.6: setting latency timer to 64
[ 0.828027] pci 0000:00:1e.0: setting latency timer to 64
[ 0.828033] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.828035] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.828036] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.828038] pci_bus 0000:01: resource 1 [mem 0xe9000000-0xea0fffff]
[ 0.828039] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.828041] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.828042] pci_bus 0000:02: resource 1 [mem 0xe4000000-0xe82fffff]
[ 0.828044] pci_bus 0000:02: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.828046] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.828047] pci_bus 0000:03: resource 1 [mem 0xc0300000-0xc04fffff]
[ 0.828048] pci_bus 0000:03: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
[ 0.828050] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
[ 0.828051] pci_bus 0000:04: resource 1 [mem 0xc0700000-0xc08fffff]
[ 0.828053] pci_bus 0000:04: resource 2 [mem 0xc0900000-0xc0afffff 64bit pref]
[ 0.828055] pci_bus 0000:05: resource 1 [mem 0xea100000-0xea1fffff]
[ 0.828056] pci_bus 0000:05: resource 3 [io 0x0000-0xffff]
[ 0.828057] pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffffffffffff]
[ 0.828068] NET: Registered protocol family 2
[ 0.828217] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.828586] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.829792] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.830186] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.830315] TCP reno registered
[ 0.830436] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.830612] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.852780] pci 0000:01:00.0: Boot video device
[ 0.852801] PCI: CLS 64 bytes, default 64
[ 0.852825] Trying to unpack rootfs image as initramfs...
[ 0.927701] Freeing initrd memory: 4532k freed
[ 0.928310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.928439] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.928584] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.931217] msgmni has been set to 15977
[ 0.931483] alg: No test for stdrng (krng)
[ 0.931661] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.931804] io scheduler noop registered
[ 0.931980] io scheduler cfq registered (default)
[ 0.932162] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.932186] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
[ 0.932254] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.932291] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
[ 0.932371] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.932408] pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X
[ 0.932492] pcieport 0000:00:1c.6: setting latency timer to 64
[ 0.932525] pcieport 0000:00:1c.6: irq 32 for MSI/MSI-X
[ 0.932766] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 0.949262] brd: module loaded
[ 0.949450] PNP: No PS/2 controller found. Probing ports directly.
[ 0.952505] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.952637] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.952840] mice: PS/2 mouse device common for all mice
[ 0.953004] rtc_cmos 00:03: RTC can wake from S4
[ 0.953166] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.953315] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.953461] cpuidle: using governor ladder
[ 0.953587] cpuidle: using governor menu
[ 0.953821] TCP cubic registered
[ 0.954342] rtc_cmos 00:03: setting system clock to 2010-02-21 09:34:05 UTC (1266744845)
[ 0.954485] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.954612] EDD information not available.
[ 0.954775] Freeing unused kernel memory: 372k freed
[ 0.981196] NET: Registered protocol family 1
[ 1.009373] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.009523] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 1.011439] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.011583] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.011677] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
[ 1.025533] SCSI subsystem initialized
[ 1.033175] usbcore: registered new interface driver usbfs
[ 1.033330] usbcore: registered new interface driver hub
[ 1.036580] usbcore: registered new device driver usb
[ 1.046188] libata version 3.00 loaded.
[ 1.046801] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.048466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.104165] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI version 1.10
[ 1.444936] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:27:0e:08:99:a2
[ 1.445077] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.445291] 0000:00:19.0: eth0: MAC: 9, PHY: 9, PBA No: ffffff-0ff
[ 1.445443] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.445590] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.445596] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.445736] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.445914] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.450064] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.450077] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc0002000
[ 1.459759] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.459913] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.460042] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.460184] usb usb1: Product: EHCI Host Controller
[ 1.460311] usb usb1: Manufacturer: Linux 2.6.33-rc8-highlander ehci_hcd
[ 1.460438] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.460627] hub 1-0:1.0: USB hub found
[ 1.460755] hub 1-0:1.0: 3 ports detected
[ 1.460932] ahci 0000:00:1f.2: version 3.0
[ 1.460944] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.461105] ahci 0000:00:1f.2: irq 34 for MSI/MSI-X
[ 1.472752] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.472905] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems apst
[ 1.473048] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.482764] scsi0 : ahci
[ 1.488713] scsi1 : ahci
[ 1.488889] scsi2 : ahci
[ 1.489064] scsi3 : ahci
[ 1.489242] scsi4 : ahci
[ 1.489411] scsi5 : ahci
[ 1.489636] ata1: SATA max UDMA/133 abar m2048@0xea225000 port 0xea225100 irq 34
[ 1.489799] ata2: SATA max UDMA/133 abar m2048@0xea225000 port 0xea225180 irq 34
[ 1.489947] ata3: SATA max UDMA/133 abar m2048@0xea225000 port 0xea225200 irq 34
[ 1.490090] ata4: SATA max UDMA/133 abar m2048@0xea225000 port 0xea225280 irq 34
[ 1.490233] ata5: SATA max UDMA/133 abar m2048@0xea225000 port 0xea225300 irq 34
[ 1.490374] ata6: SATA max UDMA/133 abar m2048@0xea225000 port 0xea225380 irq 34
[ 1.490537] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.490692] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.490700] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.490843] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.491014] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.495139] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.495152] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc0003000
[ 1.504671] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.504826] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.504956] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.505098] usb usb2: Product: EHCI Host Controller
[ 1.505222] usb usb2: Manufacturer: Linux 2.6.33-rc8-highlander ehci_hcd
[ 1.505351] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.505532] hub 2-0:1.0: USB hub found
[ 1.505662] hub 2-0:1.0: 3 ports detected
[ 1.602556] firewire_core: created device fw0: GUID 00902700025cc502, S400
[ 1.761205] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.797116] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.797276] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.797301] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.797336] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.797340] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.797358] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.801428] ata1.00: ATAPI: HL-DT-ST DVDRAM GH24NS50, XP01, max UDMA/100, ATAPI AN
[ 1.801694] ata3.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133
[ 1.801831] ata3.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.803686] ata2.00: ATA-8: WDC WD3000HLFS-01G6U0, 04.04V01, max UDMA/133
[ 1.803827] ata2.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.806455] ata1.00: configured for UDMA/100
[ 1.806722] ata3.00: configured for UDMA/133
[ 1.809726] ata2.00: configured for UDMA/133
[ 1.815129] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS50 XP01 PQ: 0 ANSI: 5
[ 1.815406] scsi 1:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
[ 1.815652] scsi 2:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5
[ 1.818702] sd 1:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 1.818726] sd 2:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 1.818749] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.818751] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.818761] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.818822] sdb:
[ 1.819400] sd 1:0:0:0: [sda] Write Protect is off
[ 1.819641] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.819652] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.819870] sda: sda1 sda2 sda3 sda4 < sdb1 sdb2
[ 1.826986] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.829667] sda5 sda6 sda7 >
[ 1.847740] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.870470] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.870613] Uniform CD-ROM driver Revision: 3.20
[ 1.870786] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.872831] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.872987] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.873156] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.875685] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.875807] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.876081] hub 1-1:1.0: USB hub found
[ 1.876304] hub 1-1:1.0: 6 ports detected
[ 1.978743] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 2.093899] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.094020] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.094309] hub 2-1:1.0: USB hub found
[ 2.094509] hub 2-1:1.0: 8 ports detected
[ 2.158670] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 2.159018] EXT4-fs (sda6): write access will be enabled during recovery
[ 2.168877] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[ 2.253590] usb 1-1.1: New USB device found, idVendor=2001, idProduct=f103
[ 2.253695] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.253987] hub 1-1.1:1.0: USB hub found
[ 2.254209] hub 1-1.1:1.0: 7 ports detected
[ 2.517839] usb 1-1.1.3: new full speed USB device using ehci_hcd and address 4
[ 2.594536] EXT4-fs (sda6): orphan cleanup on readonly fs
[ 2.594831] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 138609
[ 2.594861] EXT4-fs (sda6): 1 orphan inode deleted
[ 2.595153] EXT4-fs (sda6): recovery complete
[ 2.604538] usb 1-1.1.3: New USB device found, idVendor=1e7d, idProduct=2ced
[ 2.604658] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.604786] usb 1-1.1.3: Product: ROCCAT Kone
[ 2.604895] usb 1-1.1.3: Manufacturer: ROCCAT
[ 2.605001] usb 1-1.1.3: SerialNumber: Kone 1.1000
[ 2.609975] usbcore: registered new interface driver hiddev
[ 2.611459] input: ROCCAT ROCCAT Kone as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/input/input0
[ 2.611658] generic-usb 0003:1E7D:2CED.0001: input,hidraw0: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone] on usb-0000:00:1a.0-1.1.3/input0
[ 2.612528] input: ROCCAT ROCCAT Kone as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/input/input1
[ 2.612744] generic-usb 0003:1E7D:2CED.0002: input,hidraw1: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone] on usb-0000:00:1a.0-1.1.3/input1
[ 2.612904] usbcore: registered new interface driver usbhid
[ 2.613029] usbhid: USB HID core driver
[ 2.667579] usb 1-1.1.4: new low speed USB device using ehci_hcd and address 5
[ 2.762240] usb 1-1.1.4: New USB device found, idVendor=0a81, idProduct=0205
[ 2.762361] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.762484] usb 1-1.1.4: Product: PS2 to USB Converter
[ 2.762592] usb 1-1.1.4: Manufacturer: CHESEN
[ 2.769236] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input2
[ 2.769379] generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.1.4/input0
[ 2.777123] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/input/input3
[ 2.777315] generic-usb 0003:0A81:0205.0004: input,hidraw3: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.1.4/input1
[ 2.839249] usb 1-1.1.7: new low speed USB device using ehci_hcd and address 6
[ 2.881176] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 2.922425] usb 1-1.1.7: New USB device found, idVendor=045e, idProduct=0008
[ 2.922543] usb 1-1.1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.922663] usb 1-1.1.7: Product: Microsoft SideWinder Precision Pro (USB)
[ 2.922771] usb 1-1.1.7: Manufacturer: Microsoft
[ 2.940342] input: Microsoft Microsoft SideWinder Precision Pro (USB) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.7/1-1.1.7:1.0/input/input4
[ 2.940493] generic-usb 0003:045E:0008.0005: input,hidraw4: USB HID v1.00 Joystick [Microsoft Microsoft SideWinder Precision Pro (USB)] on usb-0000:00:1a.0-1.1.7/input0
[ 3.682182] udev: starting version 151
[ 4.336795] Monitor-Mwait will be used to enter C-1 state
[ 4.336913] Monitor-Mwait will be used to enter C-2 state
[ 4.336932] Monitor-Mwait will be used to enter C-3 state
[ 4.373458] ------------[ cut here ]------------
[ 4.373587] WARNING: at arch/x86/kernel/hpet.c:404 hpet_next_event+0x57/0x77()
[ 4.373723] Hardware name:
[ 4.373842] hpet: compare register read back failed.
[ 4.373965] Modules linked in: button(+)
[ 4.374119] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 4.374178] ACPI: Sleep Button [SLPB]
[ 4.374230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.374262] ACPI: Power Button [PWRF]
[ 4.374837] evdev psmouse joydev processor usbhid hid ext4 mbcache jbd2 crc16 sg sr_mod cdrom sd_mod ahci ehci_hcd firewire_ohci libata firewire_core usbcore crc_itu_t nls_base scsi_mod e1000e thermal fan unix [last unloaded: scsi_wait_scan]
[ 4.378073] Pid: 0, comm: swapper Not tainted 2.6.33-rc8-highlander #4
[ 4.378204] Call Trace:
[ 4.378331] [<ffffffff8102c35b>] ? warn_slowpath_common+0x76/0x8c
[ 4.378461] [<ffffffff8102c3c3>] ? warn_slowpath_fmt+0x40/0x45
[ 4.378587] [<ffffffff810196a1>] ? hpet_next_event+0x57/0x77
[ 4.378716] [<ffffffff8104857e>] ? tick_dev_program_event+0x33/0x9e
[ 4.378846] [<ffffffff810480a2>] ? tick_broadcast_oneshot_control+0x9c/0xf5
[ 4.378978] [<ffffffff81047a8c>] ? tick_notify+0x1f9/0x34d
[ 4.379103] [<ffffffff811323ed>] ? acpi_hw_read+0x4d/0x54
[ 4.379231] [<ffffffff81041afe>] ? notifier_call_chain+0x2e/0x5b
[ 4.379358] [<ffffffff810474c2>] ? clockevents_notify+0x31/0x139
[ 4.379489] [<ffffffffa017d3b5>] ? acpi_idle_enter_bm+0x15e/0x2c9 [processor]
[ 4.379632] [<ffffffffa017d24b>] ? acpi_idle_enter_c1+0xe7/0xf3 [processor]
[ 4.379761] [<ffffffff81175159>] ? cpuidle_idle_call+0x89/0xc0
[ 4.379890] [<ffffffff81001213>] ? cpu_idle+0x9d/0xd7
[ 4.380018] ---[ end trace 6d72980bc75e52eb ]---
[ 4.465862] ACPI: WMI: Mapper loaded
[ 4.487191] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.746539] SB-XFi 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.746818] SB-XFi 0000:02:00.0: setting latency timer to 64
[ 5.209786] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.210092] HDA Intel 0000:00:1b.0: irq 35 for MSI/MSI-X
[ 5.210124] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.401234] hda_codec: ALC889: BIOS auto-probing.
[ 5.412836] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.413094] HDA Intel 0000:01:00.1: irq 36 for MSI/MSI-X
[ 5.413115] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 8.421452] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
[ 8.654717] hda-codec: No codec parser is available
[ 8.656224] hda-codec: No codec parser is available
[ 8.657851] hda-codec: No codec parser is available
[ 8.659300] hda-codec: No codec parser is available
[ 9.020672] CE: hpet increasing min_delta_ns to 15000 nsec
[ 9.399886] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x3
[ 9.400046] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 9.441544] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x3
[ 9.441694] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 9.450436] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x3
[ 9.450621] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 9.459253] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x3
[ 9.459416] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 9.468152] microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x3
[ 9.468293] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 9.476865] microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x3
[ 9.477009] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 9.485470] microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x3
[ 9.485669] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 9.494586] microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x3
[ 9.494774] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 9.503506] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 9.520911] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.521129] cannot find the slot for index 2 (range 0-2), error: -16
[ 9.521325] PC-Speaker initialization failed.
[ 9.530568] pcspkr: probe of pcspkr failed with error -16
[ 9.545997] fuse init (API version 7.13)
[ 10.041557] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 11.070566] NET: Registered protocol family 10
[ 11.071179] lo: Disabled Privacy Extensions
[ 11.128913] RPC: Registered udp transport module.
[ 11.129061] RPC: Registered tcp transport module.
[ 11.129192] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.165611] Slow work thread pool: Starting up
[ 11.165941] Slow work thread pool: Ready
[ 11.166119] FS-Cache: Loaded
[ 11.203654] FS-Cache: Netfs 'nfs' registered for caching
[ 11.232237] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 11.517075] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
[ 11.567840] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
[ 11.569127] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.612202] NET: Registered protocol family 17
[ 12.055908] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 14.985451] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 14.988437] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.355406] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 17.355410] vboxdrv: Successfully done.
[ 17.355412] vboxdrv: Found 8 processor cores.
[ 17.355502] VBoxDrv: dbg - g_abExecMemory=ffffffffa046d140
[ 17.355810] vboxdrv: fAsync=0 offMin=0x2f1 offMax=0x357f
[ 17.355999] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 17.356154] vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001).
[ 17.743036] Bluetooth: Core ver 2.15
[ 17.743256] NET: Registered protocol family 31
[ 17.743389] Bluetooth: HCI device and connection manager initialized
[ 17.743526] Bluetooth: HCI socket layer initialized
[ 17.774068] Bluetooth: L2CAP ver 2.14
[ 17.774200] Bluetooth: L2CAP socket layer initialized
[ 17.810713] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.810879] Bluetooth: BNEP filters: protocol multicast
[ 17.815950] Bluetooth: RFCOMM TTY layer initialized
[ 17.816087] Bluetooth: RFCOMM socket layer initialized
[ 17.816217] Bluetooth: RFCOMM ver 1.11
[ 17.839022] Bridge firewalling registered
[ 17.861337] Bluetooth: SCO (Voice Link) ver 0.6
[ 17.861485] Bluetooth: SCO socket layer initialized
[ 20.417028] nvidia: module license 'NVIDIA' taints kernel.
[ 20.417033] Disabling lock debugging due to kernel taint
[ 21.265239] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.265253] nvidia 0000:01:00.0: setting latency timer to 64
[ 21.265260] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.266061] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.03 Mon Feb 1 18:33:51 PST 2010
[ 23.452870] 0000:00:19.0: eth0: TSO is Enabled
[ 38.355141] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11)
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11)
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
00:19.0 Ethernet controller [0200]: Intel Corporation 82578DC Gigabit Network Connection [8086:10f0] (rev 05)
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05)
00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 05)
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
01:00.0 VGA compatible controller [0300]: nVidia Corporation GT200 [GeForce GT 220] [10de:0a20] (rev a2)
01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be2] (rev a1)
02:00.0 Audio device [0403]: Creative Labs X-Fi Titanium series [EMU20k2] [1102:000b] (rev 03)
05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
Attachment:
signature.asc
Description: PGP signature