[PATCH net-next 5/7] drivers/net/e1000: Use pr_<level> and netif_<level>

From: Joe Perches
Date: Mon Feb 22 2010 - 21:57:55 EST

Next message: Joe Perches: "[PATCH net-next 7/7] drivers/net/igb: Use netdev_<level>"
Previous message: Joe Perches: "[PATCH net-next 6/7] drivers/net/e1000e: Use pr_<level> and netdev_<level>"
In reply to: Allan, Bruce W: "RE: [PATCH net-next 6/7] drivers/net/e1000e: Use pr_<level> andnetdev_<level>"
Next in thread: Joe Perches: "[PATCH net-next 7/7] drivers/net/igb: Use netdev_<level>"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Convert DPRINTK, commonly used for debugging, to netif_<level>
Remove #define PFX
Use #define pr_fmt
Convert DEBUGOUTx to pr_debug
Convert DEBUGFUNC to more commonly used ENTER()
Convert some printks to pr_<level>
Coalesce long formats

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/net/e1000/e1000.h | 17 --
drivers/net/e1000/e1000_ethtool.c | 38 ++--
drivers/net/e1000/e1000_hw.c | 383 ++++++++++++++++++-------------------
drivers/net/e1000/e1000_main.c | 272 +++++++++++++-------------
drivers/net/e1000/e1000_osdep.h | 14 +--
drivers/net/e1000/e1000_param.c | 121 +++++++------
6 files changed, 409 insertions(+), 436 deletions(-)

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 9902b33..6c11fb0 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -81,23 +81,6 @@ struct e1000_adapter;

#include "e1000_hw.h"

-#ifdef DBG
-#define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
-#else
-#define E1000_DBG(args...)
-#endif
-
-#define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
-
-#define PFX "e1000: "
-
-#define DPRINTK(nlevel, klevel, fmt, args...) \
-do { \
- if (NETIF_MSG_##nlevel & adapter->msg_enable) \
- printk(KERN_##klevel PFX "%s: %s: " fmt, \
- adapter->netdev->name, __func__, ##args); \
-} while (0)
-
#define E1000_MAX_INTR 10

/* TX/RX descriptor defines */
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index c67e931..715be7c 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -346,7 +346,8 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)

netdev->features &= ~NETIF_F_TSO6;

- DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+ netif_info(adapter, probe, adapter->netdev,
+ "TSO is %s\n", data ? "Enabled" : "Disabled");
adapter->tso_force = true;
return 0;
}
@@ -714,9 +715,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
writel(write & test[i], address);
read = readl(address);
if (read != (write & test[i] & mask)) {
- DPRINTK(DRV, ERR, "pattern test reg %04X failed: "
- "got 0x%08X expected 0x%08X\n",
- reg, read, (write & test[i] & mask));
+ netif_err(adapter, drv, adapter->netdev,
+ "pattern test reg %04X failed: got 0x%08X expected 0x%08X\n",
+ reg, read, (write & test[i] & mask));
*data = reg;
return true;
}
@@ -734,9 +735,9 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
writel(write & mask, address);
read = readl(address);
if ((read & mask) != (write & mask)) {
- DPRINTK(DRV, ERR, "set/check reg %04X test failed: "
- "got 0x%08X expected 0x%08X\n",
- reg, (read & mask), (write & mask));
+ netif_err(adapter, drv, adapter->netdev,
+ "set/check reg %04X test failed: got 0x%08X expected 0x%08X\n",
+ reg, (read & mask), (write & mask));
*data = reg;
return true;
}
@@ -779,8 +780,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
ew32(STATUS, toggle);
after = er32(STATUS) & toggle;
if (value != after) {
- DPRINTK(DRV, ERR, "failed STATUS register test got: "
- "0x%08X expected: 0x%08X\n", after, value);
+ netif_err(adapter, drv, adapter->netdev,
+ "failed STATUS register test got: 0x%08X expected: 0x%08X\n",
+ after, value);
*data = 1;
return 1;
}
@@ -894,8 +896,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
*data = 1;
return -1;
}
- DPRINTK(HW, INFO, "testing %s interrupt\n",
- (shared_int ? "shared" : "unshared"));
+ netif_info(adapter, hw, adapter->netdev, "testing %s interrupt\n",
+ shared_int ? "shared" : "unshared");

/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
@@ -1558,7 +1560,8 @@ static void e1000_diag_test(struct net_device *netdev,
u8 forced_speed_duplex = hw->forced_speed_duplex;
u8 autoneg = hw->autoneg;

- DPRINTK(HW, INFO, "offline testing starting\n");
+ netif_info(adapter, hw, adapter->netdev,
+ "offline testing starting\n");

/* Link test performed before hardware reset so autoneg doesn't
* interfere with test result */
@@ -1598,7 +1601,8 @@ static void e1000_diag_test(struct net_device *netdev,
if (if_running)
dev_open(netdev);
} else {
- DPRINTK(HW, INFO, "online testing starting\n");
+ netif_info(adapter, hw, adapter->netdev,
+ "online testing starting\n");
/* Online tests */
if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1691,8 +1695,8 @@ static void e1000_get_wol(struct net_device *netdev,
wol->supported &= ~WAKE_UCAST;

if (adapter->wol & E1000_WUFC_EX)
- DPRINTK(DRV, ERR, "Interface does not support "
- "directed (unicast) frame wake-up packets\n");
+ netif_err(adapter, drv, adapter->netdev,
+ "Interface does not support directed (unicast) frame wake-up packets\n");
break;
default:
break;
@@ -1725,8 +1729,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
switch (hw->device_id) {
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
if (wol->wolopts & WAKE_UCAST) {
- DPRINTK(DRV, ERR, "Interface does not support "
- "directed (unicast) frame wake-up packets\n");
+ netif_err(adapter, drv, adapter->netdev,
+ "Interface does not support directed (unicast) frame wake-up packets\n");
return -EOPNOTSUPP;
}
break;
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 8d7d87f..6d16f3f 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -30,6 +30,8 @@
* Shared functions for accessing and configuring the MAC
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "e1000_hw.h"

static s32 e1000_check_downshift(struct e1000_hw *hw);
@@ -114,7 +116,7 @@ static DEFINE_SPINLOCK(e1000_eeprom_lock);
*/
static s32 e1000_set_phy_type(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_set_phy_type");
+ ENTER();

if (hw->mac_type == e1000_undefined)
return -E1000_ERR_PHY_TYPE;
@@ -152,7 +154,7 @@ static void e1000_phy_init_script(struct e1000_hw *hw)
u32 ret_val;
u16 phy_saved_data;

- DEBUGFUNC("e1000_phy_init_script");
+ ENTER();

if (hw->phy_init_script) {
msleep(20);
@@ -245,7 +247,7 @@ static void e1000_phy_init_script(struct e1000_hw *hw)
*/
s32 e1000_set_mac_type(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_set_mac_type");
+ ENTER();

switch (hw->device_id) {
case E1000_DEV_ID_82542:
@@ -354,7 +356,7 @@ void e1000_set_media_type(struct e1000_hw *hw)
{
u32 status;

- DEBUGFUNC("e1000_set_media_type");
+ ENTER();

if (hw->mac_type != e1000_82543) {
/* tbi_compatibility is only valid on 82543 */
@@ -401,16 +403,16 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
u32 led_ctrl;
s32 ret_val;

- DEBUGFUNC("e1000_reset_hw");
+ ENTER();

/* For 82542 (rev 2.0), disable MWI before issuing a device reset */
if (hw->mac_type == e1000_82542_rev2_0) {
- DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ pr_debug("Disabling MWI on 82542 rev 2.0\n");
e1000_pci_clear_mwi(hw);
}

/* Clear interrupt mask to stop board from generating interrupts */
- DEBUGOUT("Masking off all interrupts\n");
+ pr_debug("Masking off all interrupts\n");
ew32(IMC, 0xffffffff);

/* Disable the Transmit and Receive units. Then delay to allow
@@ -442,7 +444,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
* the current PCI configuration. The global reset bit is self-
* clearing, and should clear within a microsecond.
*/
- DEBUGOUT("Issuing a global reset to MAC\n");
+ pr_debug("Issuing a global reset to MAC\n");

switch (hw->mac_type) {
case e1000_82544:
@@ -516,7 +518,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
}

/* Clear interrupt mask to stop board from generating interrupts */
- DEBUGOUT("Masking off all interrupts\n");
+ pr_debug("Masking off all interrupts\n");
ew32(IMC, 0xffffffff);

/* Clear any pending interrupt events. */
@@ -549,12 +551,12 @@ s32 e1000_init_hw(struct e1000_hw *hw)
u32 mta_size;
u32 ctrl_ext;

- DEBUGFUNC("e1000_init_hw");
+ ENTER();

/* Initialize Identification LED */
ret_val = e1000_id_led_init(hw);
if (ret_val) {
- DEBUGOUT("Error Initializing Identification LED\n");
+ pr_debug("Error Initializing Identification LED\n");
return ret_val;
}

@@ -562,14 +564,14 @@ s32 e1000_init_hw(struct e1000_hw *hw)
e1000_set_media_type(hw);

/* Disabling VLAN filtering. */
- DEBUGOUT("Initializing the IEEE VLAN\n");
+ pr_debug("Initializing the IEEE VLAN\n");
if (hw->mac_type < e1000_82545_rev_3)
ew32(VET, 0);
e1000_clear_vfta(hw);

/* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
if (hw->mac_type == e1000_82542_rev2_0) {
- DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ pr_debug("Disabling MWI on 82542 rev 2.0\n");
e1000_pci_clear_mwi(hw);
ew32(RCTL, E1000_RCTL_RST);
E1000_WRITE_FLUSH();
@@ -591,7 +593,7 @@ s32 e1000_init_hw(struct e1000_hw *hw)
}

/* Zero out the Multicast HASH table */
- DEBUGOUT("Zeroing the MTA\n");
+ pr_debug("Zeroing the MTA\n");
mta_size = E1000_MC_TBL_SIZE;
for (i = 0; i < mta_size; i++) {
E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
@@ -662,7 +664,7 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
u16 eeprom_data;
s32 ret_val;

- DEBUGFUNC("e1000_adjust_serdes_amplitude");
+ ENTER();

if (hw->media_type != e1000_media_type_internal_serdes)
return E1000_SUCCESS;
@@ -709,7 +711,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
s32 ret_val;
u16 eeprom_data;

- DEBUGFUNC("e1000_setup_link");
+ ENTER();

/* Read and store word 0x0F of the EEPROM. This word contains bits
* that determine the hardware's default PAUSE (flow control) mode,
@@ -723,7 +725,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
1, &eeprom_data);
if (ret_val) {
- DEBUGOUT("EEPROM Read Error\n");
+ pr_debug("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
@@ -747,7 +749,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)

hw->original_fc = hw->fc;

- DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
+ pr_debug("After fix-ups FlowControl is now = %x\n", hw->fc);

/* Take the 4 bits from EEPROM word 0x0F that determine the initial
* polarity value for the SW controlled pins, and setup the
@@ -760,7 +762,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
1, &eeprom_data);
if (ret_val) {
- DEBUGOUT("EEPROM Read Error\n");
+ pr_debug("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
@@ -777,8 +779,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
* control is disabled, because it does not hurt anything to
* initialize these registers.
*/
- DEBUGOUT
- ("Initializing the Flow Control address, type and timer regs\n");
+ pr_debug("Initializing the Flow Control address, type and timer regs\n");

ew32(FCT, FLOW_CONTROL_TYPE);
ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
@@ -827,7 +828,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
u32 signal = 0;
s32 ret_val;

- DEBUGFUNC("e1000_setup_fiber_serdes_link");
+ ENTER();

/* On adapters with a MAC newer than 82544, SWDP 1 will be
* set when the optics detect a signal. On older adapters, it will be
@@ -893,7 +894,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
break;
default:
- DEBUGOUT("Flow control param set incorrectly\n");
+ pr_debug("Flow control param set incorrectly\n");
return -E1000_ERR_CONFIG;
break;
}
@@ -904,7 +905,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
* link-up status bit will be set and the flow control enable bits (RFCE
* and TFCE) will be set according to their negotiated value.
*/
- DEBUGOUT("Auto-negotiation enabled\n");
+ pr_debug("Auto-negotiation enabled\n");

ew32(TXCW, txcw);
ew32(CTRL, ctrl);
@@ -921,7 +922,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
*/
if (hw->media_type == e1000_media_type_internal_serdes ||
(er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
- DEBUGOUT("Looking for Link\n");
+ pr_debug("Looking for Link\n");
for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
msleep(10);
status = er32(STATUS);
@@ -929,7 +930,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
break;
}
if (i == (LINK_UP_TIMEOUT / 10)) {
- DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+ pr_debug("Never got a valid link from auto-neg!!!\n");
hw->autoneg_failed = 1;
/* AutoNeg failed to achieve a link, so we'll call
* e1000_check_for_link. This routine will force the link up if
@@ -938,16 +939,16 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
*/
ret_val = e1000_check_for_link(hw);
if (ret_val) {
- DEBUGOUT("Error while checking for link\n");
+ pr_debug("Error while checking for link\n");
return ret_val;
}
hw->autoneg_failed = 0;
} else {
hw->autoneg_failed = 0;
- DEBUGOUT("Valid Link Found\n");
+ pr_debug("Valid Link Found\n");
}
} else {
- DEBUGOUT("No Signal Detected\n");
+ pr_debug("No Signal Detected\n");
}
return E1000_SUCCESS;
}
@@ -964,7 +965,7 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_copper_link_preconfig");
+ ENTER();

ctrl = er32(CTRL);
/* With 82543, we need to force speed and duplex on the MAC equal to what
@@ -987,10 +988,10 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
/* Make sure we have a valid PHY */
ret_val = e1000_detect_gig_phy(hw);
if (ret_val) {
- DEBUGOUT("Error, did not detect valid phy.\n");
+ pr_debug("Error, did not detect valid phy\n");
return ret_val;
}
- DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
+ pr_debug("Phy ID = %x \n", hw->phy_id);

/* Set PHY to class A mode (if necessary) */
ret_val = e1000_set_phy_mode(hw);
@@ -1025,14 +1026,14 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_copper_link_igp_setup");
+ ENTER();

if (hw->phy_reset_disable)
return E1000_SUCCESS;

ret_val = e1000_phy_reset(hw);
if (ret_val) {
- DEBUGOUT("Error Resetting the PHY\n");
+ pr_debug("Error Resetting the PHY\n");
return ret_val;
}

@@ -1049,7 +1050,7 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
/* disable lplu d3 during driver init */
ret_val = e1000_set_d3_lplu_state(hw, false);
if (ret_val) {
- DEBUGOUT("Error Disabling LPLU D3\n");
+ pr_debug("Error Disabling LPLU D3\n");
return ret_val;
}
}
@@ -1166,7 +1167,7 @@ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_copper_link_mgp_setup");
+ ENTER();

if (hw->phy_reset_disable)
return E1000_SUCCESS;
@@ -1255,7 +1256,7 @@ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
/* SW Reset the PHY so all changes take effect */
ret_val = e1000_phy_reset(hw);
if (ret_val) {
- DEBUGOUT("Error Resetting the PHY\n");
+ pr_debug("Error Resetting the PHY\n");
return ret_val;
}

@@ -1274,7 +1275,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_copper_link_autoneg");
+ ENTER();

/* Perform some bounds checking on the hw->autoneg_advertised
* parameter. If this variable is zero, then set it to the default.
@@ -1287,13 +1288,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (hw->autoneg_advertised == 0)
hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;

- DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+ pr_debug("Reconfiguring auto-neg advertisement params\n");
ret_val = e1000_phy_setup_autoneg(hw);
if (ret_val) {
- DEBUGOUT("Error Setting up Auto-Negotiation\n");
+ pr_debug("Error Setting up Auto-Negotiation\n");
return ret_val;
}
- DEBUGOUT("Restarting Auto-Neg\n");
+ pr_debug("Restarting Auto-Neg\n");

/* Restart auto-negotiation by setting the Auto Neg Enable bit and
* the Auto Neg Restart bit in the PHY control register.
@@ -1313,8 +1314,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (hw->wait_autoneg_complete) {
ret_val = e1000_wait_autoneg(hw);
if (ret_val) {
- DEBUGOUT
- ("Error while waiting for autoneg to complete\n");
+ pr_debug("Error while waiting for autoneg to complete\n");
return ret_val;
}
}
@@ -1340,20 +1340,20 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
{
s32 ret_val;
- DEBUGFUNC("e1000_copper_link_postconfig");
+ ENTER();

if (hw->mac_type >= e1000_82544) {
e1000_config_collision_dist(hw);
} else {
ret_val = e1000_config_mac_to_phy(hw);
if (ret_val) {
- DEBUGOUT("Error configuring MAC to PHY settings\n");
+ pr_debug("Error configuring MAC to PHY settings\n");
return ret_val;
}
}
ret_val = e1000_config_fc_after_link_up(hw);
if (ret_val) {
- DEBUGOUT("Error Configuring Flow Control\n");
+ pr_debug("Error Configuring Flow Control\n");
return ret_val;
}

@@ -1361,7 +1361,7 @@ static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
if (hw->phy_type == e1000_phy_igp) {
ret_val = e1000_config_dsp_after_link_change(hw, true);
if (ret_val) {
- DEBUGOUT("Error Configuring DSP after link up\n");
+ pr_debug("Error Configuring DSP after link up\n");
return ret_val;
}
}
@@ -1381,7 +1381,7 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
u16 i;
u16 phy_data;

- DEBUGFUNC("e1000_setup_copper_link");
+ ENTER();

/* Check if it is a valid PHY and set PHY mode if necessary. */
ret_val = e1000_copper_link_preconfig(hw);
@@ -1407,10 +1407,10 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
} else {
/* PHY will be set to 10H, 10F, 100H,or 100F
* depending on value from forced_speed_duplex. */
- DEBUGOUT("Forcing speed and duplex\n");
+ pr_debug("Forcing speed and duplex\n");
ret_val = e1000_phy_force_speed_duplex(hw);
if (ret_val) {
- DEBUGOUT("Error Forcing Speed and Duplex\n");
+ pr_debug("Error Forcing Speed and Duplex\n");
return ret_val;
}
}
@@ -1432,13 +1432,13 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
if (ret_val)
return ret_val;

- DEBUGOUT("Valid link established!!!\n");
+ pr_debug("Valid link established!!!\n");
return E1000_SUCCESS;
}
udelay(10);
}

- DEBUGOUT("Unable to establish link!!!\n");
+ pr_debug("Unable to establish link!!!\n");
return E1000_SUCCESS;
}

@@ -1454,7 +1454,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
u16 mii_autoneg_adv_reg;
u16 mii_1000t_ctrl_reg;

- DEBUGFUNC("e1000_phy_setup_autoneg");
+ ENTER();

/* Read the MII Auto-Neg Advertisement Register (Address 4). */
ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
@@ -1481,41 +1481,40 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;

- DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
+ pr_debug("autoneg_advertised %x\n", hw->autoneg_advertised);

/* Do we want to advertise 10 Mb Half Duplex? */
if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
- DEBUGOUT("Advertise 10mb Half duplex\n");
+ pr_debug("Advertise 10mb Half duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
}

/* Do we want to advertise 10 Mb Full Duplex? */
if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
- DEBUGOUT("Advertise 10mb Full duplex\n");
+ pr_debug("Advertise 10mb Full duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
}

/* Do we want to advertise 100 Mb Half Duplex? */
if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
- DEBUGOUT("Advertise 100mb Half duplex\n");
+ pr_debug("Advertise 100mb Half duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
}

/* Do we want to advertise 100 Mb Full Duplex? */
if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
- DEBUGOUT("Advertise 100mb Full duplex\n");
+ pr_debug("Advertise 100mb Full duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
}

/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
- DEBUGOUT
- ("Advertise 1000mb Half duplex requested, request denied!\n");
+ pr_debug("Advertise 1000mb Half duplex requested, request denied!\n");
}

/* Do we want to advertise 1000 Mb Full Duplex? */
if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
- DEBUGOUT("Advertise 1000mb Full duplex\n");
+ pr_debug("Advertise 1000mb Full duplex\n");
mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
}

@@ -1568,7 +1567,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
break;
default:
- DEBUGOUT("Flow control param set incorrectly\n");
+ pr_debug("Flow control param set incorrectly\n");
return -E1000_ERR_CONFIG;
}

@@ -1576,7 +1575,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
if (ret_val)
return ret_val;

- DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+ pr_debug("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);

ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
if (ret_val)
@@ -1600,12 +1599,12 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
u16 phy_data;
u16 i;

- DEBUGFUNC("e1000_phy_force_speed_duplex");
+ ENTER();

/* Turn off Flow control if we are forcing speed and duplex. */
hw->fc = E1000_FC_NONE;

- DEBUGOUT1("hw->fc = %d\n", hw->fc);
+ pr_debug("hw->fc = %d\n", hw->fc);

/* Read the Device Control Register. */
ctrl = er32(CTRL);
@@ -1634,14 +1633,14 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
*/
ctrl |= E1000_CTRL_FD;
mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
- DEBUGOUT("Full Duplex\n");
+ pr_debug("Full Duplex\n");
} else {
/* We want to force half duplex so we CLEAR the full duplex bits in
* the Device and MII Control Registers.
*/
ctrl &= ~E1000_CTRL_FD;
mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
- DEBUGOUT("Half Duplex\n");
+ pr_debug("Half Duplex\n");
}

/* Are we forcing 100Mbps??? */
@@ -1651,13 +1650,13 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
ctrl |= E1000_CTRL_SPD_100;
mii_ctrl_reg |= MII_CR_SPEED_100;
mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
- DEBUGOUT("Forcing 100mb ");
+ pr_debug("Forcing 100mb ");
} else {
/* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
mii_ctrl_reg |= MII_CR_SPEED_10;
mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
- DEBUGOUT("Forcing 10mb ");
+ pr_debug("Forcing 10mb ");
}

e1000_config_collision_dist(hw);
@@ -1680,7 +1679,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
if (ret_val)
return ret_val;

- DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
+ pr_debug("M88E1000 PSCR: %x\n", phy_data);

/* Need to reset the PHY or these changes will be ignored */
mii_ctrl_reg |= MII_CR_RESET;
@@ -1720,7 +1719,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
*/
if (hw->wait_autoneg_complete) {
/* We will wait for autoneg to complete. */
- DEBUGOUT("Waiting for forced speed/duplex link.\n");
+ pr_debug("Waiting for forced speed/duplex link\n");
mii_status_reg = 0;

/* We will wait for autoneg to complete or 4.5 seconds to expire. */
@@ -1746,7 +1745,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
/* We didn't get link. Reset the DSP and wait again for link. */
ret_val = e1000_phy_reset_dsp(hw);
if (ret_val) {
- DEBUGOUT("Error Resetting PHY DSP\n");
+ pr_debug("Error Resetting PHY DSP\n");
return ret_val;
}
}
@@ -1826,7 +1825,7 @@ void e1000_config_collision_dist(struct e1000_hw *hw)
{
u32 tctl, coll_dist;

- DEBUGFUNC("e1000_config_collision_dist");
+ ENTER();

if (hw->mac_type < e1000_82543)
coll_dist = E1000_COLLISION_DISTANCE_82542;
@@ -1857,7 +1856,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_config_mac_to_phy");
+ ENTER();

/* 82544 or newer MAC, Auto Speed Detection takes care of
* MAC speed/duplex configuration.*/
@@ -1913,7 +1912,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
{
u32 ctrl;

- DEBUGFUNC("e1000_force_mac_fc");
+ ENTER();

/* Get the current configuration of the Device Control Register */
ctrl = er32(CTRL);
@@ -1952,7 +1951,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
break;
default:
- DEBUGOUT("Flow control param set incorrectly\n");
+ pr_debug("Flow control param set incorrectly\n");
return -E1000_ERR_CONFIG;
}

@@ -1984,7 +1983,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
u16 speed;
u16 duplex;

- DEBUGFUNC("e1000_config_fc_after_link_up");
+ ENTER();

/* Check for the case where we have fiber media and auto-neg failed
* so we had to force link. In this case, we need to force the
@@ -1997,7 +1996,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
&& (!hw->autoneg))) {
ret_val = e1000_force_mac_fc(hw);
if (ret_val) {
- DEBUGOUT("Error forcing flow control settings\n");
+ pr_debug("Error forcing flow control settings\n");
return ret_val;
}
}
@@ -2079,11 +2078,10 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
*/
if (hw->original_fc == E1000_FC_FULL) {
hw->fc = E1000_FC_FULL;
- DEBUGOUT("Flow Control = FULL.\n");
+ pr_debug("Flow Control = FULL\n");
} else {
hw->fc = E1000_FC_RX_PAUSE;
- DEBUGOUT
- ("Flow Control = RX PAUSE frames only.\n");
+ pr_debug("Flow Control = RX PAUSE frames only\n");
}
}
/* For receiving PAUSE frames ONLY.
@@ -2100,8 +2098,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
{
hw->fc = E1000_FC_TX_PAUSE;
- DEBUGOUT
- ("Flow Control = TX PAUSE frames only.\n");
+ pr_debug("Flow Control = TX PAUSE frames only\n");
}
/* For transmitting PAUSE frames ONLY.
*
@@ -2117,8 +2114,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
{
hw->fc = E1000_FC_RX_PAUSE;
- DEBUGOUT
- ("Flow Control = RX PAUSE frames only.\n");
+ pr_debug("Flow Control = RX PAUSE frames only\n");
}
/* Per the IEEE spec, at this point flow control should be
* disabled. However, we want to consider that we could
@@ -2144,11 +2140,10 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
hw->original_fc == E1000_FC_TX_PAUSE) ||
hw->fc_strict_ieee) {
hw->fc = E1000_FC_NONE;
- DEBUGOUT("Flow Control = NONE.\n");
+ pr_debug("Flow Control = NONE\n");
} else {
hw->fc = E1000_FC_RX_PAUSE;
- DEBUGOUT
- ("Flow Control = RX PAUSE frames only.\n");
+ pr_debug("Flow Control = RX PAUSE frames only\n");
}

/* Now we need to do one last check... If we auto-
@@ -2158,8 +2153,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
ret_val =
e1000_get_speed_and_duplex(hw, &speed, &duplex);
if (ret_val) {
- DEBUGOUT
- ("Error getting link speed and duplex\n");
+ pr_debug("Error getting link speed and duplex\n");
return ret_val;
}

@@ -2171,13 +2165,11 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
*/
ret_val = e1000_force_mac_fc(hw);
if (ret_val) {
- DEBUGOUT
- ("Error forcing flow control settings\n");
+ pr_debug("Error forcing flow control settings\n");
return ret_val;
}
} else {
- DEBUGOUT
- ("Copper PHY and Auto Neg has not completed.\n");
+ pr_debug("Copper PHY and Auto Neg has not completed\n");
}
}
return E1000_SUCCESS;
@@ -2197,7 +2189,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
u32 status;
s32 ret_val = E1000_SUCCESS;

- DEBUGFUNC("e1000_check_for_serdes_link_generic");
+ ENTER();

ctrl = er32(CTRL);
status = er32(STATUS);
@@ -2216,7 +2208,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
hw->autoneg_failed = 1;
goto out;
}
- DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
+ pr_debug("NOT RXing /C/, disable AutoNeg and force link\n");

/* Disable auto-negotiation in the TXCW register */
ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
@@ -2229,7 +2221,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
/* Configure Flow Control after forcing link up. */
ret_val = e1000_config_fc_after_link_up(hw);
if (ret_val) {
- DEBUGOUT("Error configuring flow control\n");
+ pr_debug("Error configuring flow control\n");
goto out;
}
} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -2239,7 +2231,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
* and disable forced link in the Device Control register
* in an attempt to auto-negotiate with our link partner.
*/
- DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ pr_debug("RXing /C/, enable AutoNeg and stop forcing link\n");
ew32(TXCW, hw->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));

@@ -2256,11 +2248,11 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
hw->serdes_has_link = true;
- DEBUGOUT("SERDES: Link up - forced.\n");
+ pr_debug("SERDES: Link up - forced\n");
}
} else {
hw->serdes_has_link = false;
- DEBUGOUT("SERDES: Link down - force failed.\n");
+ pr_debug("SERDES: Link down - force failed\n");
}
}

@@ -2273,20 +2265,18 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
hw->serdes_has_link = true;
- DEBUGOUT("SERDES: Link up - autoneg "
- "completed successfully.\n");
+ pr_debug("SERDES: Link up - autoneg completed successfully\n");
} else {
hw->serdes_has_link = false;
- DEBUGOUT("SERDES: Link down - invalid"
- "codewords detected in autoneg.\n");
+ pr_debug("SERDES: Link down - invalidcodewords detected in autoneg\n");
}
} else {
hw->serdes_has_link = false;
- DEBUGOUT("SERDES: Link down - no sync.\n");
+ pr_debug("SERDES: Link down - no sync\n");
}
} else {
hw->serdes_has_link = false;
- DEBUGOUT("SERDES: Link down - autoneg failed\n");
+ pr_debug("SERDES: Link down - autoneg failed\n");
}
}

@@ -2312,7 +2302,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_check_for_link");
+ ENTER();

ctrl = er32(CTRL);
status = er32(STATUS);
@@ -2407,8 +2397,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
else {
ret_val = e1000_config_mac_to_phy(hw);
if (ret_val) {
- DEBUGOUT
- ("Error configuring MAC to PHY settings\n");
+ pr_debug("Error configuring MAC to PHY settings\n");
return ret_val;
}
}
@@ -2419,7 +2408,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
*/
ret_val = e1000_config_fc_after_link_up(hw);
if (ret_val) {
- DEBUGOUT("Error configuring flow control\n");
+ pr_debug("Error configuring flow control\n");
return ret_val;
}

@@ -2435,8 +2424,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
ret_val =
e1000_get_speed_and_duplex(hw, &speed, &duplex);
if (ret_val) {
- DEBUGOUT
- ("Error getting link speed and duplex\n");
+ pr_debug("Error getting link speed and duplex\n");
return ret_val;
}
if (speed != SPEED_1000) {
@@ -2487,33 +2475,29 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_get_speed_and_duplex");
+ ENTER();

if (hw->mac_type >= e1000_82543) {
status = er32(STATUS);
- if (status & E1000_STATUS_SPEED_1000) {
+ if (status & E1000_STATUS_SPEED_1000)
*speed = SPEED_1000;
- DEBUGOUT("1000 Mbs, ");
- } else if (status & E1000_STATUS_SPEED_100) {
+ else if (status & E1000_STATUS_SPEED_100)
*speed = SPEED_100;
- DEBUGOUT("100 Mbs, ");
- } else {
+ else
*speed = SPEED_10;
- DEBUGOUT("10 Mbs, ");
- }

- if (status & E1000_STATUS_FD) {
+ if (status & E1000_STATUS_FD)
*duplex = FULL_DUPLEX;
- DEBUGOUT("Full Duplex\n");
- } else {
+ else
*duplex = HALF_DUPLEX;
- DEBUGOUT(" Half Duplex\n");
- }
} else {
- DEBUGOUT("1000 Mbs, Full Duplex\n");
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
}
+ pr_debug("%u Mbps, %s Duplex\n",
+ (*speed == SPEED_1000) ? 1000 :
+ (*speed == SPEED_100) ? 100: 10,
+ (*duplex == FULL_DUPLEX) ? "Full" : "Half");

/* IGP01 PHY may advertise full duplex operation after speed downgrade even
* if it is operating at half duplex. Here we set the duplex settings to
@@ -2554,8 +2538,8 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
u16 i;
u16 phy_data;

- DEBUGFUNC("e1000_wait_autoneg");
- DEBUGOUT("Waiting for Auto-Neg to complete.\n");
+ ENTER();
+ pr_debug("Waiting for Auto-Neg to complete\n");

/* We will wait for autoneg to complete or 4.5 seconds to expire. */
for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
@@ -2718,7 +2702,7 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
{
u32 ret_val;

- DEBUGFUNC("e1000_read_phy_reg");
+ ENTER();

if ((hw->phy_type == e1000_phy_igp) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
@@ -2741,10 +2725,10 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
u32 mdic = 0;
const u32 phy_addr = 1;

- DEBUGFUNC("e1000_read_phy_reg_ex");
+ ENTER();

if (reg_addr > MAX_PHY_REG_ADDRESS) {
- DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ pr_debug("PHY Address %d is out of range\n", reg_addr);
return -E1000_ERR_PARAM;
}

@@ -2767,11 +2751,11 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
break;
}
if (!(mdic & E1000_MDIC_READY)) {
- DEBUGOUT("MDI Read did not complete\n");
+ pr_debug("MDI Read did not complete\n");
return -E1000_ERR_PHY;
}
if (mdic & E1000_MDIC_ERROR) {
- DEBUGOUT("MDI Error\n");
+ pr_debug("MDI Error\n");
return -E1000_ERR_PHY;
}
*phy_data = (u16) mdic;
@@ -2820,7 +2804,7 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
{
u32 ret_val;

- DEBUGFUNC("e1000_write_phy_reg");
+ ENTER();

if ((hw->phy_type == e1000_phy_igp) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
@@ -2843,10 +2827,10 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
u32 mdic = 0;
const u32 phy_addr = 1;

- DEBUGFUNC("e1000_write_phy_reg_ex");
+ ENTER();

if (reg_addr > MAX_PHY_REG_ADDRESS) {
- DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ pr_debug("PHY Address %d is out of range\n", reg_addr);
return -E1000_ERR_PARAM;
}

@@ -2870,7 +2854,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
break;
}
if (!(mdic & E1000_MDIC_READY)) {
- DEBUGOUT("MDI Write did not complete\n");
+ pr_debug("MDI Write did not complete\n");
return -E1000_ERR_PHY;
}
} else {
@@ -2910,9 +2894,9 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw)
u32 led_ctrl;
s32 ret_val;

- DEBUGFUNC("e1000_phy_hw_reset");
+ ENTER();

- DEBUGOUT("Resetting Phy...\n");
+ pr_debug("Resetting Phy...\n");

if (hw->mac_type > e1000_82543) {
/* Read the device control register and assert the E1000_CTRL_PHY_RST
@@ -2973,7 +2957,7 @@ s32 e1000_phy_reset(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_phy_reset");
+ ENTER();

switch (hw->phy_type) {
case e1000_phy_igp:
@@ -3013,7 +2997,7 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
u16 phy_id_high, phy_id_low;
bool match = false;

- DEBUGFUNC("e1000_detect_gig_phy");
+ ENTER();

if (hw->phy_id != 0)
return E1000_SUCCESS;
@@ -3057,16 +3041,16 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
match = true;
break;
default:
- DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
+ pr_debug("Invalid MAC type %d\n", hw->mac_type);
return -E1000_ERR_CONFIG;
}
phy_init_status = e1000_set_phy_type(hw);

if ((match) && (phy_init_status == E1000_SUCCESS)) {
- DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
+ pr_debug("PHY ID 0x%X detected\n", hw->phy_id);
return E1000_SUCCESS;
}
- DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
+ pr_debug("Invalid PHY ID 0x%X\n", hw->phy_id);
return -E1000_ERR_PHY;
}

@@ -3079,7 +3063,7 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
{
s32 ret_val;
- DEBUGFUNC("e1000_phy_reset_dsp");
+ ENTER();

do {
ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
@@ -3111,7 +3095,7 @@ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
u16 phy_data, min_length, max_length, average;
e1000_rev_polarity polarity;

- DEBUGFUNC("e1000_phy_igp_get_info");
+ ENTER();

/* The downshift status is checked only once, after link is established,
* and it stored in the hw->speed_downgraded parameter. */
@@ -3189,7 +3173,7 @@ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
u16 phy_data;
e1000_rev_polarity polarity;

- DEBUGFUNC("e1000_phy_m88_get_info");
+ ENTER();

/* The downshift status is checked only once, after link is established,
* and it stored in the hw->speed_downgraded parameter. */
@@ -3261,7 +3245,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_phy_get_info");
+ ENTER();

phy_info->cable_length = e1000_cable_length_undefined;
phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
@@ -3273,7 +3257,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
phy_info->remote_rx = e1000_1000t_rx_status_undefined;

if (hw->media_type != e1000_media_type_copper) {
- DEBUGOUT("PHY info is only valid for copper media\n");
+ pr_debug("PHY info is only valid for copper media\n");
return -E1000_ERR_CONFIG;
}

@@ -3286,7 +3270,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
return ret_val;

if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
- DEBUGOUT("PHY info is only valid if link is up\n");
+ pr_debug("PHY info is only valid if link is up\n");
return -E1000_ERR_CONFIG;
}

@@ -3298,10 +3282,10 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)

s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_validate_mdi_settings");
+ ENTER();

if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
- DEBUGOUT("Invalid MDI setting detected\n");
+ pr_debug("Invalid MDI setting detected\n");
hw->mdix = 1;
return -E1000_ERR_CONFIG;
}
@@ -3322,7 +3306,7 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw)
s32 ret_val = E1000_SUCCESS;
u16 eeprom_size;

- DEBUGFUNC("e1000_init_eeprom_params");
+ ENTER();

switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -3539,7 +3523,7 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
struct e1000_eeprom_info *eeprom = &hw->eeprom;
u32 eecd, i = 0;

- DEBUGFUNC("e1000_acquire_eeprom");
+ ENTER();

eecd = er32(EECD);

@@ -3557,7 +3541,7 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
if (!(eecd & E1000_EECD_GNT)) {
eecd &= ~E1000_EECD_REQ;
ew32(EECD, eecd);
- DEBUGOUT("Could not acquire EEPROM grant\n");
+ pr_debug("Could not acquire EEPROM grant\n");
return -E1000_ERR_EEPROM;
}
}
@@ -3639,7 +3623,7 @@ static void e1000_release_eeprom(struct e1000_hw *hw)
{
u32 eecd;

- DEBUGFUNC("e1000_release_eeprom");
+ ENTER();

eecd = er32(EECD);

@@ -3687,7 +3671,7 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
u16 retry_count = 0;
u8 spi_stat_reg;

- DEBUGFUNC("e1000_spi_eeprom_ready");
+ ENTER();

/* Read "Status Register" repeatedly until the LSB is cleared. The
* EEPROM will signal that the command has been completed by clearing
@@ -3712,7 +3696,7 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
* only 0-5mSec on 5V devices)
*/
if (retry_count >= EEPROM_MAX_RETRY_SPI) {
- DEBUGOUT("SPI EEPROM Status error\n");
+ pr_debug("SPI EEPROM Status error\n");
return -E1000_ERR_EEPROM;
}

@@ -3741,7 +3725,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
struct e1000_eeprom_info *eeprom = &hw->eeprom;
u32 i = 0;

- DEBUGFUNC("e1000_read_eeprom");
+ ENTER();

/* If eeprom is not yet detected, do so now */
if (eeprom->word_size == 0)
@@ -3750,11 +3734,10 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
/* A check for invalid values: offset too large, too many words, and not
* enough words.
*/
- if ((offset >= eeprom->word_size)
- || (words > eeprom->word_size - offset) || (words == 0)) {
- DEBUGOUT2
- ("\"words\" parameter out of bounds. Words = %d, size = %d\n",
- offset, eeprom->word_size);
+ if ((offset >= eeprom->word_size) ||
+ (words > eeprom->word_size - offset) || (words == 0)) {
+ pr_debug("\"words\" parameter out of bounds. Words = %d, size = %d\n",
+ offset, eeprom->word_size);
return -E1000_ERR_EEPROM;
}

@@ -3832,11 +3815,11 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
u16 checksum = 0;
u16 i, eeprom_data;

- DEBUGFUNC("e1000_validate_eeprom_checksum");
+ ENTER();

for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
+ pr_debug("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
checksum += eeprom_data;
@@ -3845,7 +3828,7 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
if (checksum == (u16) EEPROM_SUM)
return E1000_SUCCESS;
else {
- DEBUGOUT("EEPROM Checksum Invalid\n");
+ pr_debug("EEPROM Checksum Invalid\n");
return -E1000_ERR_EEPROM;
}
}
@@ -3862,18 +3845,18 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
u16 checksum = 0;
u16 i, eeprom_data;

- DEBUGFUNC("e1000_update_eeprom_checksum");
+ ENTER();

for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
+ pr_debug("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
checksum += eeprom_data;
}
checksum = (u16) EEPROM_SUM - checksum;
if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
- DEBUGOUT("EEPROM Write Error\n");
+ pr_debug("EEPROM Write Error\n");
return -E1000_ERR_EEPROM;
}
return E1000_SUCCESS;
@@ -3904,7 +3887,7 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
struct e1000_eeprom_info *eeprom = &hw->eeprom;
s32 status = 0;

- DEBUGFUNC("e1000_write_eeprom");
+ ENTER();

/* If eeprom is not yet detected, do so now */
if (eeprom->word_size == 0)
@@ -3915,7 +3898,7 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
*/
if ((offset >= eeprom->word_size)
|| (words > eeprom->word_size - offset) || (words == 0)) {
- DEBUGOUT("\"words\" parameter out of bounds\n");
+ pr_debug("\"words\" parameter out of bounds\n");
return -E1000_ERR_EEPROM;
}

@@ -3949,7 +3932,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
struct e1000_eeprom_info *eeprom = &hw->eeprom;
u16 widx = 0;

- DEBUGFUNC("e1000_write_eeprom_spi");
+ ENTER();

while (widx < words) {
u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
@@ -4013,7 +3996,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
u16 words_written = 0;
u16 i = 0;

- DEBUGFUNC("e1000_write_eeprom_microwire");
+ ENTER();

/* Send the write enable command to the EEPROM (3-bit opcode plus
* 6/8-bit dummy address beginning with 11). It's less work to include
@@ -4056,7 +4039,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
udelay(50);
}
if (i == 200) {
- DEBUGOUT("EEPROM Write did not complete\n");
+ pr_debug("EEPROM Write did not complete\n");
return -E1000_ERR_EEPROM;
}

@@ -4092,12 +4075,12 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw)
u16 offset;
u16 eeprom_data, i;

- DEBUGFUNC("e1000_read_mac_addr");
+ ENTER();

for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
offset = i >> 1;
if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
+ pr_debug("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
@@ -4132,17 +4115,17 @@ static void e1000_init_rx_addrs(struct e1000_hw *hw)
u32 i;
u32 rar_num;

- DEBUGFUNC("e1000_init_rx_addrs");
+ ENTER();

/* Setup the receive address. */
- DEBUGOUT("Programming MAC Address into RAR[0]\n");
+ pr_debug("Programming MAC Address into RAR[0]\n");

e1000_rar_set(hw, hw->mac_addr, 0);

rar_num = E1000_RAR_ENTRIES;

/* Zero out the other 15 receive addresses. */
- DEBUGOUT("Clearing RAR[1-15]\n");
+ pr_debug("Clearing RAR[1-15]\n");
for (i = 1; i < rar_num; i++) {
E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
E1000_WRITE_FLUSH();
@@ -4290,7 +4273,7 @@ static s32 e1000_id_led_init(struct e1000_hw *hw)
u16 eeprom_data, i, temp;
const u16 led_mask = 0x0F;

- DEBUGFUNC("e1000_id_led_init");
+ ENTER();

if (hw->mac_type < e1000_82540) {
/* Nothing to do */
@@ -4303,7 +4286,7 @@ static s32 e1000_id_led_init(struct e1000_hw *hw)
hw->ledctl_mode2 = hw->ledctl_default;

if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
+ pr_debug("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}

@@ -4363,7 +4346,7 @@ s32 e1000_setup_led(struct e1000_hw *hw)
u32 ledctl;
s32 ret_val = E1000_SUCCESS;

- DEBUGFUNC("e1000_setup_led");
+ ENTER();

switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -4415,7 +4398,7 @@ s32 e1000_cleanup_led(struct e1000_hw *hw)
{
s32 ret_val = E1000_SUCCESS;

- DEBUGFUNC("e1000_cleanup_led");
+ ENTER();

switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -4451,7 +4434,7 @@ s32 e1000_led_on(struct e1000_hw *hw)
{
u32 ctrl = er32(CTRL);

- DEBUGFUNC("e1000_led_on");
+ ENTER();

switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -4497,7 +4480,7 @@ s32 e1000_led_off(struct e1000_hw *hw)
{
u32 ctrl = er32(CTRL);

- DEBUGFUNC("e1000_led_off");
+ ENTER();

switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -4626,7 +4609,7 @@ static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
*/
void e1000_reset_adaptive(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_reset_adaptive");
+ ENTER();

if (hw->adaptive_ifs) {
if (!hw->ifs_params_forced) {
@@ -4639,7 +4622,7 @@ void e1000_reset_adaptive(struct e1000_hw *hw)
hw->in_ifs_mode = false;
ew32(AIT, 0);
} else {
- DEBUGOUT("Not in Adaptive IFS mode!\n");
+ pr_debug("Not in Adaptive IFS mode!\n");
}
}

@@ -4654,7 +4637,7 @@ void e1000_reset_adaptive(struct e1000_hw *hw)
*/
void e1000_update_adaptive(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_update_adaptive");
+ ENTER();

if (hw->adaptive_ifs) {
if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
@@ -4679,7 +4662,7 @@ void e1000_update_adaptive(struct e1000_hw *hw)
}
}
} else {
- DEBUGOUT("Not in Adaptive IFS mode!\n");
+ pr_debug("Not in Adaptive IFS mode!\n");
}
}

@@ -4851,7 +4834,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
u16 i, phy_data;
u16 cable_length;

- DEBUGFUNC("e1000_get_cable_length");
+ ENTER();

*min_length = *max_length = 0;

@@ -4968,7 +4951,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_check_polarity");
+ ENTER();

if (hw->phy_type == e1000_phy_m88) {
/* return the Polarity bit in the Status register. */
@@ -5034,7 +5017,7 @@ static s32 e1000_check_downshift(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;

- DEBUGFUNC("e1000_check_downshift");
+ ENTER();

if (hw->phy_type == e1000_phy_igp) {
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
@@ -5081,7 +5064,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
};
u16 min_length, max_length;

- DEBUGFUNC("e1000_config_dsp_after_link_change");
+ ENTER();

if (hw->phy_type != e1000_phy_igp)
return E1000_SUCCESS;
@@ -5089,7 +5072,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
if (link_up) {
ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
if (ret_val) {
- DEBUGOUT("Error getting link speed and duplex\n");
+ pr_debug("Error getting link speed and duplex\n");
return ret_val;
}

@@ -5289,7 +5272,7 @@ static s32 e1000_set_phy_mode(struct e1000_hw *hw)
s32 ret_val;
u16 eeprom_data;

- DEBUGFUNC("e1000_set_phy_mode");
+ ENTER();

if ((hw->mac_type == e1000_82545_rev_3) &&
(hw->media_type == e1000_media_type_copper)) {
@@ -5337,7 +5320,7 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
{
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_set_d3_lplu_state");
+ ENTER();

if (hw->phy_type != e1000_phy_igp)
return E1000_SUCCESS;
@@ -5440,7 +5423,7 @@ static s32 e1000_set_vco_speed(struct e1000_hw *hw)
u16 default_page = 0;
u16 phy_data;

- DEBUGFUNC("e1000_set_vco_speed");
+ ENTER();

switch (hw->mac_type) {
case e1000_82545_rev_3:
@@ -5613,7 +5596,7 @@ static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
*/
static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_get_auto_rd_done");
+ ENTER();
msleep(5);
return E1000_SUCCESS;
}
@@ -5628,7 +5611,7 @@ static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
*/
static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_get_phy_cfg_done");
+ ENTER();
mdelay(10);
return E1000_SUCCESS;
}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 3b14dd7..ebbcc58 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -26,6 +26,8 @@

*******************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "e1000.h"
#include <net/ip6_checksum.h>

@@ -223,18 +225,17 @@ MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
static int __init e1000_init_module(void)
{
int ret;
- printk(KERN_INFO "%s - version %s\n",
+ pr_info("%s - version %s\n",
e1000_driver_string, e1000_driver_version);
-
- printk(KERN_INFO "%s\n", e1000_copyright);
+ pr_info("%s\n", e1000_copyright);

ret = pci_register_driver(&e1000_driver);
if (copybreak != COPYBREAK_DEFAULT) {
if (copybreak == 0)
- printk(KERN_INFO "e1000: copybreak disabled\n");
+ pr_info("copybreak disabled\n");
else
- printk(KERN_INFO "e1000: copybreak enabled for "
- "packets <= %u bytes\n", copybreak);
+ pr_info("copybreak enabled for packets <= %u bytes\n",
+ copybreak);
}
return ret;
}
@@ -265,8 +266,8 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
netdev);
if (err) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate interrupt Error: %d\n", err);
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate interrupt Error: %d\n", err);
}

return err;
@@ -651,7 +652,7 @@ void e1000_reset(struct e1000_adapter *adapter)
ew32(WUC, 0);

if (e1000_init_hw(hw))
- DPRINTK(PROBE, ERR, "Hardware Error\n");
+ netif_err(adapter, probe, adapter->netdev, "Hardware Error\n");
e1000_update_mng_vlan(adapter);

/* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
@@ -692,8 +693,7 @@ static void e1000_dump_eeprom(struct e1000_adapter *adapter)

data = kmalloc(eeprom.len, GFP_KERNEL);
if (!data) {
- printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
- " data\n");
+ pr_err("Unable to allocate memory to dump EEPROM data\n");
return;
}

@@ -705,30 +705,24 @@ static void e1000_dump_eeprom(struct e1000_adapter *adapter)
csum_new += data[i] + (data[i + 1] << 8);
csum_new = EEPROM_SUM - csum_new;

- printk(KERN_ERR "/*********************/\n");
- printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
- printk(KERN_ERR "Calculated : 0x%04x\n", csum_new);
+ pr_err("/*********************/\n");
+ pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old);
+ pr_err("Calculated : 0x%04x\n", csum_new);

- printk(KERN_ERR "Offset Values\n");
- printk(KERN_ERR "======== ======\n");
+ pr_err("Offset Values\n");
+ pr_err("======== ======\n");
print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);

- printk(KERN_ERR "Include this output when contacting your support "
- "provider.\n");
- printk(KERN_ERR "This is not a software error! Something bad "
- "happened to your hardware or\n");
- printk(KERN_ERR "EEPROM image. Ignoring this "
- "problem could result in further problems,\n");
- printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
- printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
- "which is invalid\n");
- printk(KERN_ERR "and requires you to set the proper MAC "
- "address manually before continuing\n");
- printk(KERN_ERR "to enable this network device.\n");
- printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
- "to your hardware vendor\n");
- printk(KERN_ERR "or Intel Customer Support.\n");
- printk(KERN_ERR "/*********************/\n");
+ pr_err("Include this output when contacting your support provider.\n");
+ pr_err("This is not a software error! Something bad happened to your hardware or\n");
+ pr_err("EEPROM image. Ignoring this problem could result in further problems,\n");
+ pr_err("possibly loss of data, corruption or system hangs!\n");
+ pr_err("The MAC Address will be reset to 00:00:00:00:00:00, which is invalid\n");
+ pr_err("and requires you to set the proper MAC address manually before continuing\n");
+ pr_err("to enable this network device.\n");
+ pr_err("Please inspect the EEPROM dump and report the issue to your hardware vendor\n");
+ pr_err("or Intel Customer Support.\n");
+ pr_err("/*********************/\n");

kfree(data);
}
@@ -834,8 +828,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (err) {
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
- E1000_ERR("No usable DMA configuration, "
- "aborting\n");
+ pr_err("No usable DMA configuration, aborting\n");
goto err_dma;
}
}
@@ -925,7 +918,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,

/* initialize eeprom parameters */
if (e1000_init_eeprom_params(hw)) {
- E1000_ERR("EEPROM initialization failed\n");
+ pr_err("EEPROM initialization failed\n");
goto err_eeprom;
}

@@ -936,7 +929,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,

/* make sure the EEPROM is good */
if (e1000_validate_eeprom_checksum(hw) < 0) {
- DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "The EEPROM Checksum Is Not Valid\n");
e1000_dump_eeprom(adapter);
/*
* set MAC address to all zeroes to invalidate and temporary
@@ -950,14 +944,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
} else {
/* copy the MAC address out of the EEPROM */
if (e1000_read_mac_addr(hw))
- DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "EEPROM Read Error\n");
}
/* don't block initalization here due to bad MAC address */
memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);

if (!is_valid_ether_addr(netdev->perm_addr))
- DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Invalid MAC Address\n");

e1000_get_bus_info(hw);

@@ -1039,15 +1035,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);

/* print bus type/speed/width info */
- DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
- ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
- ((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
- (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
- (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
- (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
- ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
-
- printk("%pM\n", netdev->dev_addr);
+ netif_info(adapter, probe, adapter->netdev, "(PCI%s:%s:%s) %pM\n",
+ (hw->bus_type == e1000_bus_type_pcix) ? "-X" : "",
+ (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
+ (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
+ (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
+ (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz",
+ (hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit",
+ netdev->dev_addr);

/* reset the hardware with the new settings */
e1000_reset(adapter);
@@ -1060,7 +1055,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* carrier off reporting is important to ethtool even BEFORE open */
netif_carrier_off(netdev);

- DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Intel(R) PRO/1000 Network Connection\n");

cards_found++;
return 0;
@@ -1160,7 +1156,8 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
/* identify the MAC */

if (e1000_set_mac_type(hw)) {
- DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unknown MAC Type\n");
return -EIO;
}

@@ -1193,7 +1190,8 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
adapter->num_rx_queues = 1;

if (e1000_alloc_queues(adapter)) {
- DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate memory for queues\n");
return -ENOMEM;
}

@@ -1387,8 +1385,8 @@ static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
size = sizeof(struct e1000_buffer) * txdr->count;
txdr->buffer_info = vmalloc(size);
if (!txdr->buffer_info) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for the transmit descriptor ring\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate memory for the transmit descriptor ring\n");
return -ENOMEM;
}
memset(txdr->buffer_info, 0, size);
@@ -1402,8 +1400,8 @@ static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
if (!txdr->desc) {
setup_tx_desc_die:
vfree(txdr->buffer_info);
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for the transmit descriptor ring\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate memory for the transmit descriptor ring\n");
return -ENOMEM;
}

@@ -1411,8 +1409,9 @@ setup_tx_desc_die:
if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
void *olddesc = txdr->desc;
dma_addr_t olddma = txdr->dma;
- DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
- "at %p\n", txdr->size, txdr->desc);
+ netif_err(adapter, tx_err, adapter->netdev,
+ "txdr align check failed: %u bytes at %p\n",
+ txdr->size, txdr->desc);
/* Try again, without freeing the previous */
txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
/* Failed allocation, critical failure */
@@ -1426,9 +1425,8 @@ setup_tx_desc_die:
pci_free_consistent(pdev, txdr->size, txdr->desc,
txdr->dma);
pci_free_consistent(pdev, txdr->size, olddesc, olddma);
- DPRINTK(PROBE, ERR,
- "Unable to allocate aligned memory "
- "for the transmit descriptor ring\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate aligned memory for the transmit descriptor ring\n");
vfree(txdr->buffer_info);
return -ENOMEM;
} else {
@@ -1459,8 +1457,8 @@ int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
for (i = 0; i < adapter->num_tx_queues; i++) {
err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
if (err) {
- DPRINTK(PROBE, ERR,
- "Allocation for Tx Queue %u failed\n", i);
+ netif_err(adapter, probe, adapter->netdev,
+ "Allocation for Tx Queue %u failed\n", i);
for (i-- ; i >= 0; i--)
e1000_free_tx_resources(adapter,
&adapter->tx_ring[i]);
@@ -1580,8 +1578,8 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
size = sizeof(struct e1000_buffer) * rxdr->count;
rxdr->buffer_info = vmalloc(size);
if (!rxdr->buffer_info) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for the receive descriptor ring\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate memory for the receive descriptor ring\n");
return -ENOMEM;
}
memset(rxdr->buffer_info, 0, size);
@@ -1596,8 +1594,8 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);

if (!rxdr->desc) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for the receive descriptor ring\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate memory for the receive descriptor ring\n");
setup_rx_desc_die:
vfree(rxdr->buffer_info);
return -ENOMEM;
@@ -1607,16 +1605,16 @@ setup_rx_desc_die:
if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
void *olddesc = rxdr->desc;
dma_addr_t olddma = rxdr->dma;
- DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
- "at %p\n", rxdr->size, rxdr->desc);
+ netif_err(adapter, rx_err, adapter->netdev,
+ "rxdr align check failed: %u bytes at %p\n",
+ rxdr->size, rxdr->desc);
/* Try again, without freeing the previous */
rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
/* Failed allocation, critical failure */
if (!rxdr->desc) {
pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory "
- "for the receive descriptor ring\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate memory for the receive descriptor ring\n");
goto setup_rx_desc_die;
}

@@ -1625,9 +1623,8 @@ setup_rx_desc_die:
pci_free_consistent(pdev, rxdr->size, rxdr->desc,
rxdr->dma);
pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
- DPRINTK(PROBE, ERR,
- "Unable to allocate aligned memory "
- "for the receive descriptor ring\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate aligned memory for the receive descriptor ring\n");
goto setup_rx_desc_die;
} else {
/* Free old allocation, new allocation was successful */
@@ -1658,8 +1655,8 @@ int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
for (i = 0; i < adapter->num_rx_queues; i++) {
err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
if (err) {
- DPRINTK(PROBE, ERR,
- "Allocation for Rx Queue %u failed\n", i);
+ netif_err(adapter, probe, adapter->netdev,
+ "Allocation for Rx Queue %u failed\n", i);
for (i-- ; i >= 0; i--)
e1000_free_rx_resources(adapter,
&adapter->rx_ring[i]);
@@ -2109,7 +2106,8 @@ static void e1000_set_rx_mode(struct net_device *netdev)
u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);

if (!mcarray) {
- DPRINTK(PROBE, ERR, "memory allocation failed\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "memory allocation failed\n");
return;
}

@@ -2309,16 +2307,14 @@ static void e1000_watchdog(unsigned long data)
&adapter->link_duplex);

ctrl = er32(CTRL);
- printk(KERN_INFO "e1000: %s NIC Link is Up %d Mbps %s, "
- "Flow Control: %s\n",
- netdev->name,
- adapter->link_speed,
- adapter->link_duplex == FULL_DUPLEX ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) && (ctrl &
- E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
- E1000_CTRL_RFCE) ? "RX" : ((ctrl &
- E1000_CTRL_TFCE) ? "TX" : "None" )));
+ netdev_info(netdev, "NIC Link is Up %d Mbps %s, Flow Control: %s\n",
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) &&
+ (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
+ (ctrl & E1000_CTRL_RFCE) ? "RX" :
+ (ctrl & E1000_CTRL_TFCE) ? "TX" : "None");

/* tweak tx_queue_len according to speed/duplex
* and adjust the timeout factor */
@@ -2352,8 +2348,7 @@ static void e1000_watchdog(unsigned long data)
if (netif_carrier_ok(netdev)) {
adapter->link_speed = 0;
adapter->link_duplex = 0;
- printk(KERN_INFO "e1000: %s NIC Link is Down\n",
- netdev->name);
+ netdev_info(netdev, "NIC Link is Down\n");
netif_carrier_off(netdev);

if (!test_bit(__E1000_DOWN, &adapter->flags))
@@ -2643,8 +2638,9 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter,
break;
default:
if (unlikely(net_ratelimit()))
- DPRINTK(DRV, WARNING,
- "checksum_partial proto=%x!\n", skb->protocol);
+ netif_warn(adapter, drv, adapter->netdev,
+ "checksum_partial proto=%x!\n",
+ skb->protocol);
break;
}

@@ -2987,8 +2983,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
/* fall through */
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
- DPRINTK(DRV, ERR,
- "__pskb_pull_tail failed.\n");
+ netif_err(adapter, drv, adapter->netdev,
+ "__pskb_pull_tail failed\n");
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
@@ -3136,7 +3132,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)

if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
- DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Invalid MTU setting\n");
return -EINVAL;
}

@@ -3144,7 +3141,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
switch (hw->mac_type) {
case e1000_undefined ... e1000_82542_rev2_1:
if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
- DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Jumbo Frames not supported\n");
return -EINVAL;
}
break;
@@ -3182,8 +3180,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
(max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;

- printk(KERN_INFO "e1000: %s changing MTU from %d to %d\n",
- netdev->name, netdev->mtu, new_mtu);
+ netdev_info(netdev, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
netdev->mtu = new_mtu;

if (netif_running(netdev))
@@ -3496,27 +3494,28 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
!(er32(STATUS) & E1000_STATUS_TXOFF)) {

/* detected Tx unit hang */
- DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
- " Tx Queue <%lu>\n"
- " TDH <%x>\n"
- " TDT <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "buffer_info[next_to_clean]\n"
- " time_stamp <%lx>\n"
- " next_to_watch <%x>\n"
- " jiffies <%lx>\n"
- " next_to_watch.status <%x>\n",
- (unsigned long)((tx_ring - adapter->tx_ring) /
- sizeof(struct e1000_tx_ring)),
- readl(hw->hw_addr + tx_ring->tdh),
- readl(hw->hw_addr + tx_ring->tdt),
- tx_ring->next_to_use,
- tx_ring->next_to_clean,
- tx_ring->buffer_info[eop].time_stamp,
- eop,
- jiffies,
- eop_desc->upper.fields.status);
+ netif_err(adapter, drv, adapter->netdev,
+ "Detected Tx Unit Hang\n"
+ " Tx Queue <%lu>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ (unsigned long)((tx_ring - adapter->tx_ring) /
+ sizeof(struct e1000_tx_ring)),
+ readl(hw->hw_addr + tx_ring->tdh),
+ readl(hw->hw_addr + tx_ring->tdt),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
netif_stop_queue(netdev);
}
}
@@ -3745,7 +3744,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,

/* eth type trans needs skb->data to point to something */
if (!pskb_may_pull(skb, ETH_HLEN)) {
- DPRINTK(DRV, ERR, "pskb_may_pull failed.\n");
+ netif_err(adapter, drv, adapter->netdev,
+ "pskb_may_pull failed\n");
dev_kfree_skb(skb);
goto next_desc;
}
@@ -3845,8 +3845,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,

if (adapter->discarding) {
/* All receives must fit into a single buffer */
- E1000_DBG("%s: Receive packet consumed multiple"
- " buffers\n", netdev->name);
+ netdev_dbg(netdev, "Receive packet consumed multiple buffers\n");
/* recycle */
buffer_info->skb = skb;
if (status & E1000_RXD_STAT_EOP)
@@ -3976,8 +3975,9 @@ e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
/* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
struct sk_buff *oldskb = skb;
- DPRINTK(PROBE, ERR, "skb align check failed: %u bytes "
- "at %p\n", bufsz, skb->data);
+ netif_err(adapter, probe, adapter->netdev,
+ "skb align check failed: %u bytes at %p\n",
+ bufsz, skb->data);
/* Try again, without freeing the previous */
skb = netdev_alloc_skb_ip_align(netdev, bufsz);
/* Failed allocation, critical failure */
@@ -4075,8 +4075,9 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
/* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
struct sk_buff *oldskb = skb;
- DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
- "at %p\n", bufsz, skb->data);
+ netif_err(adapter, rx_err, adapter->netdev,
+ "skb align check failed: %u bytes at %p\n",
+ bufsz, skb->data);
/* Try again, without freeing the previous */
skb = netdev_alloc_skb_ip_align(netdev, bufsz);
/* Failed allocation, critical failure */
@@ -4114,10 +4115,10 @@ map_skb:
if (!e1000_check_64k_bound(adapter,
(void *)(unsigned long)buffer_info->dma,
adapter->rx_buffer_len)) {
- DPRINTK(RX_ERR, ERR,
- "dma align check failed: %u bytes at %p\n",
- adapter->rx_buffer_len,
- (void *)(unsigned long)buffer_info->dma);
+ netif_err(adapter, rx_err, adapter->netdev,
+ "dma align check failed: %u bytes at %p\n",
+ adapter->rx_buffer_len,
+ (void *)(unsigned long)buffer_info->dma);
dev_kfree_skb(skb);
buffer_info->skb = NULL;

@@ -4329,7 +4330,8 @@ void e1000_pci_set_mwi(struct e1000_hw *hw)
int ret_val = pci_set_mwi(adapter->pdev);

if (ret_val)
- DPRINTK(PROBE, ERR, "Error in setting MWI\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Error in setting MWI\n");
}

void e1000_pci_clear_mwi(struct e1000_hw *hw)
@@ -4460,7 +4462,8 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((hw->media_type == e1000_media_type_fiber) &&
spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}

@@ -4483,7 +4486,8 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ netif_err(adapter, probe, adapter->netdev,
+ "Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
return 0;
@@ -4606,7 +4610,7 @@ static int e1000_resume(struct pci_dev *pdev)
else
err = pci_enable_device_mem(pdev);
if (err) {
- printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
+ pr_err("Cannot enable PCI device from suspend\n");
return err;
}
pci_set_master(pdev);
@@ -4709,7 +4713,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
else
err = pci_enable_device_mem(pdev);
if (err) {
- printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
+ pr_err("Cannot re-enable PCI device after reset\n");
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
@@ -4740,7 +4744,7 @@ static void e1000_io_resume(struct pci_dev *pdev)

if (netif_running(netdev)) {
if (e1000_up(adapter)) {
- printk("e1000: can't bring device back up after reset\n");
+ netdev_err(netdev, "can't bring device back up after reset\n");
return;
}
}
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index d929852..f8db5fe 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -41,19 +41,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>

-#ifdef DBG
-#define DEBUGOUT(S) printk(KERN_DEBUG S "\n")
-#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A)
-#else
-#define DEBUGOUT(S)
-#define DEBUGOUT1(S, A...)
-#endif
-
-#define DEBUGFUNC(F) DEBUGOUT(F "\n")
-#define DEBUGOUT2 DEBUGOUT1
-#define DEBUGOUT3 DEBUGOUT2
-#define DEBUGOUT7 DEBUGOUT3
-
+#define ENTER() pr_debug("%s\n", __func__)

#define er32(reg) \
(readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 38d2741..22d1eb9 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -226,17 +226,19 @@ static int __devinit e1000_validate_option(unsigned int *value,
case enable_option:
switch (*value) {
case OPTION_ENABLED:
- DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name);
+ netif_info(adapter, probe, adapter->netdev,
+ "%s Enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
- DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name);
+ netif_info(adapter, probe, adapter->netdev,
+ "%s Disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- DPRINTK(PROBE, INFO,
- "%s set to %i\n", opt->name, *value);
+ netif_info(adapter, probe, adapter->netdev,
+ "%s set to %i\n", opt->name, *value);
return 0;
}
break;
@@ -248,7 +250,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
- DPRINTK(PROBE, INFO, "%s\n", ent->str);
+ netif_info(adapter, probe, adapter->netdev,
+ "%s\n", ent->str);
return 0;
}
}
@@ -258,8 +261,9 @@ static int __devinit e1000_validate_option(unsigned int *value,
BUG();
}

- DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",
- opt->name, *value, opt->err);
+ netif_info(adapter, probe, adapter->netdev,
+ "Invalid %s value specified (%i) %s\n",
+ opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
@@ -283,9 +287,11 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
int bd = adapter->bd_number;

if (bd >= E1000_MAX_NIC) {
- DPRINTK(PROBE, NOTICE,
- "Warning: no configuration for board #%i\n", bd);
- DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+ netif_notice(adapter, probe, adapter->netdev,
+ "Warning: no configuration for board #%i\n",
+ bd);
+ netif_notice(adapter, probe, adapter->netdev,
+ "Using defaults for all values\n");
}

{ /* Transmit Descriptor Count */
@@ -472,19 +478,20 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
adapter->itr = InterruptThrottleRate[bd];
switch (adapter->itr) {
case 0:
- DPRINTK(PROBE, INFO, "%s turned off\n",
- opt.name);
+ netif_info(adapter, probe, adapter->netdev,
+ "%s turned off\n", opt.name);
break;
case 1:
- DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
- opt.name);
+ netif_info(adapter, probe, adapter->netdev,
+ "%s set to dynamic mode\n",
+ opt.name);
adapter->itr_setting = adapter->itr;
adapter->itr = 20000;
break;
case 3:
- DPRINTK(PROBE, INFO,
- "%s set to dynamic conservative mode\n",
- opt.name);
+ netif_info(adapter, probe, adapter->netdev,
+ "%s set to dynamic conservative mode\n",
+ opt.name);
adapter->itr_setting = adapter->itr;
adapter->itr = 20000;
break;
@@ -543,19 +550,18 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
if (num_Speed > bd) {
- DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
- "parameter ignored\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Speed not valid for fiber adapters, parameter ignored\n");
}

if (num_Duplex > bd) {
- DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
- "parameter ignored\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Duplex not valid for fiber adapters, parameter ignored\n");
}

if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
- DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
- "not valid for fiber adapters, "
- "parameter ignored\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "AutoNeg other than 1000/Full is not valid for fiber adapters, parameter ignored\n");
}
}

@@ -619,9 +625,8 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
}

if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
- DPRINTK(PROBE, INFO,
- "AutoNeg specified along with Speed or Duplex, "
- "parameter ignored\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "AutoNeg specified along with Speed or Duplex, parameter ignored\n");
adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
} else { /* Autoneg */
static const struct e1000_opt_list an_list[] =
@@ -680,79 +685,86 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
case 0:
adapter->hw.autoneg = adapter->fc_autoneg = 1;
if ((num_Speed > bd) && (speed != 0 || dplx != 0))
- DPRINTK(PROBE, INFO,
- "Speed and duplex autonegotiation enabled\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Speed and duplex autonegotiation enabled\n");
break;
case HALF_DUPLEX:
- DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n");
- DPRINTK(PROBE, INFO, "Using Autonegotiation at "
- "Half Duplex only\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Half Duplex specified without Speed\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Using Autonegotiation at Half Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_100_HALF;
break;
case FULL_DUPLEX:
- DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n");
- DPRINTK(PROBE, INFO, "Using Autonegotiation at "
- "Full Duplex only\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Full Duplex specified without Speed\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Using Autonegotiation at Full Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
ADVERTISE_100_FULL |
ADVERTISE_1000_FULL;
break;
case SPEED_10:
- DPRINTK(PROBE, INFO, "10 Mbps Speed specified "
- "without Duplex\n");
- DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "10 Mbps Speed specified without Duplex\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Using Autonegotiation at 10 Mbps only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_10_FULL;
break;
case SPEED_10 + HALF_DUPLEX:
- DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Forcing to 10 Mbps Half Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_10_half;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_10 + FULL_DUPLEX:
- DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Forcing to 10 Mbps Full Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_10_full;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_100:
- DPRINTK(PROBE, INFO, "100 Mbps Speed specified "
- "without Duplex\n");
- DPRINTK(PROBE, INFO, "Using Autonegotiation at "
- "100 Mbps only\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "100 Mbps Speed specified without Duplex\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Using Autonegotiation at 100 Mbps only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
ADVERTISE_100_FULL;
break;
case SPEED_100 + HALF_DUPLEX:
- DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Forcing to 100 Mbps Half Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_100_half;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_100 + FULL_DUPLEX:
- DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Forcing to 100 Mbps Full Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_100_full;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_1000:
- DPRINTK(PROBE, INFO, "1000 Mbps Speed specified without "
- "Duplex\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "1000 Mbps Speed specified without Duplex\n");
goto full_duplex_only;
case SPEED_1000 + HALF_DUPLEX:
- DPRINTK(PROBE, INFO,
- "Half Duplex is not supported at 1000 Mbps\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Half Duplex is not supported at 1000 Mbps\n");
/* fall through */
case SPEED_1000 + FULL_DUPLEX:
full_duplex_only:
- DPRINTK(PROBE, INFO,
- "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
break;
@@ -762,9 +774,8 @@ full_duplex_only:

/* Speed, AutoNeg and MDI/MDI-X must all play nice */
if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
- DPRINTK(PROBE, INFO,
- "Speed, AutoNeg and MDI-X specifications are "
- "incompatible. Setting MDI-X to a compatible value.\n");
+ netif_info(adapter, probe, adapter->netdev,
+ "Speed, AutoNeg and MDI-X specifications are incompatible. Setting MDI-X to a compatible value\n");
}
}

--
1.7.0.14.g7e948

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Joe Perches: "[PATCH net-next 7/7] drivers/net/igb: Use netdev_<level>"
Previous message: Joe Perches: "[PATCH net-next 6/7] drivers/net/e1000e: Use pr_<level> and netdev_<level>"
In reply to: Allan, Bruce W: "RE: [PATCH net-next 6/7] drivers/net/e1000e: Use pr_<level> andnetdev_<level>"
Next in thread: Joe Perches: "[PATCH net-next 7/7] drivers/net/igb: Use netdev_<level>"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]