Re: [PATCH 10/15] MTD: nand: make reads using MTD_OOB_RAW affectonly ECC validation
From: Maxim Levitsky
Date: Tue Feb 23 2010 - 02:24:11 EST
On Mon, 2010-02-22 at 23:34 +0200, Maxim Levitsky wrote:
> On Mon, 2010-02-22 at 22:29 +0100, Thomas Gleixner wrote:
> > On Mon, 22 Feb 2010, Maxim Levitsky wrote:
> > > On Mon, 2010-02-22 at 22:20 +0100, Thomas Gleixner wrote:
> > > > On Mon, 22 Feb 2010, Maxim Levitsky wrote:
> > > >
> > > > > This changes the behavier of MTD_OOB_RAW. It used to read both OOB and data
> > > > > to the data buffer, however you would still need to specify the dummy oob buffer.
> > > > >
> > > > > This is only used in one place, but makes it hard to read data+oob without ECC
> > > > > test, thus I removed that behavier, and fixed the user.
> > > > >
> > > > > Now MTD_OOB_RAW behaves just like MTD_OOB_PLACE, but doesn't do ECC validation
> > > >
> > > > Is this tested against existing user space tools like nanddump ? Can I
> > > > still get the raw data from flash ?
> > >
> > > Thats the point.
> > > Userspace doesn't/can't use that mode.
> > > It is not exposed through mtdchar.
> > > Userspace reads the page, and then reads the oob.
> > >
> > > It does use MTD_OOB_RAW, but without data buffer, and this path I don't
> > > change.
> > >
> > > The only user of this, is the nand itself, when it reads bad block
> > > table.
> > >
> > > I confess that I didn't run test that I ported this code correctly.
> > > But I did logically verified many times that the new code works just
> > > like old one.
Note that only this patch is in question, and only . Rest are tested
with my driver,
While doing some testing, I tried to use ubi, but it appears to try 256
byte writes (subpage write I guess), and it fails _without_ my patches:
[ 723.478676] UBI: attached mtd0 to ubi0
[ 723.478686] UBI: MTD device name: "NAND simulator partition 0"
[ 723.478701] UBI: MTD device size: 8 MiB
[ 723.478711] UBI: number of good PEBs: 1024
[ 723.478720] UBI: number of bad PEBs: 0
[ 723.478730] UBI: max. allowed volumes: 44
[ 723.478739] UBI: wear-leveling threshold: 4096
[ 723.478749] UBI: number of internal volumes: 1
[ 723.478758] UBI: number of user volumes: 0
[ 723.478767] UBI: available PEBs: 1010
[ 723.478777] UBI: total number of reserved PEBs: 14
[ 723.478787] UBI: number of PEBs reserved for bad PEB handling: 10
[ 723.478800] UBI: max/mean erase counter: 0/0
[ 723.478809] UBI: image sequence number: 0
[ 723.480508] UBI: background thread "ubi_bgt0d" started, PID 4556
[ 757.904206] UBI DBG (pid 4580): ubi_cdev_ioctl: create volume
[ 757.904231] UBI DBG (pid 4580): ubi_create_volume: search for vacant volume ID
[ 757.904246] UBI DBG (pid 4580): ubi_create_volume: create device 0, volume 0, 7756800 bytes, type 3, name aaa
[ 757.906376] UBI error: ubi_io_write: error -5 while writing 256 bytes to PEB 0:256, written 0 bytes
[ 757.906398] Pid: 4580, comm: ubimkvol Tainted: P 2.6.33-rc8-wl #25
[ 757.906412] Call Trace:
[ 757.906431] [<ffffffffa0d8b1f2>] ubi_io_write+0x252/0x270 [ubi]
[ 757.906447] [<ffffffffa0d8b283>] ubi_io_write_vid_hdr+0x73/0x190 [ubi]
[ 757.906464] [<ffffffffa0d89f58>] ubi_eba_write_leb+0x198/0x7b0 [ubi]
[ 757.906481] [<ffffffff81350c90>] ? _raw_spin_unlock+0x30/0x60
[ 757.906497] [<ffffffffa0d892b1>] ? leb_write_unlock+0xa1/0xf0 [ubi]
[ 757.906515] [<ffffffffa0d82483>] ubi_change_vtbl_record+0x103/0x1c0 [ubi]
[ 757.906534] [<ffffffff81234474>] ? device_create_file+0x14/0x20
[ 757.906552] [<ffffffffa0d837ee>] ubi_create_volume+0x4ce/0x710 [ubi]
[ 757.906569] [<ffffffff8103418b>] ? release_console_sem+0x1eb/0x240
[ 757.906586] [<ffffffffa0d86589>] ubi_cdev_ioctl+0x2e9/0xb50 [ubi]
[ 757.906603] [<ffffffff810bf399>] ? __dentry_open+0x149/0x330
[ 757.906619] [<ffffffff810d0658>] vfs_ioctl+0x38/0xd0
[ 757.906632] [<ffffffff810d082a>] do_vfs_ioctl+0x8a/0x5b0
[ 757.906645] [<ffffffff8105e69d>] ? trace_hardirqs_on+0xd/0x10
[ 757.906658] [<ffffffff810d0d9a>] sys_ioctl+0x4a/0x80
[ 757.906672] [<ffffffff81002cab>] system_call_fastpath+0x16/0x1b
[ 757.906753] UBI DBG (pid 4580): ubi_dbg_dump_flash: dumping 256 bytes of data from PEB 0, offset 256
[ 757.906772] 00000000: 55 42 49 21 01 01 00 05 7f ff ef ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 UBI!............................
[ 757.906797] 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 65 b3 bd 2d ............................e..-
[ 757.906821] 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.906846] 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.906874] 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.906898] 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.906920] 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.906943] 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.906977] UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 2147479551:0, PEB 0
[ 757.907016] UBI: run torture test for PEB 0
[ 757.908132] UBI: PEB 0 passed torture test, do not mark it a bad
[ 757.908211] UBI: try another PEB
[ 757.908227] UBI error: ubi_io_write: error -5 while writing 256 bytes to PEB 0:256, written 0 bytes
[ 757.908243] Pid: 4580, comm: ubimkvol Tainted: P 2.6.33-rc8-wl #25
[ 757.908256] Call Trace:
[ 757.908268] [<ffffffffa0d8b1f2>] ubi_io_write+0x252/0x270 [ubi]
[ 757.908284] [<ffffffffa0d8b283>] ubi_io_write_vid_hdr+0x73/0x190 [ubi]
[ 757.908300] [<ffffffffa0d89f58>] ubi_eba_write_leb+0x198/0x7b0 [ubi]
[ 757.908314] [<ffffffff81350c90>] ? _raw_spin_unlock+0x30/0x60
[ 757.908329] [<ffffffffa0d892b1>] ? leb_write_unlock+0xa1/0xf0 [ubi]
[ 757.908345] [<ffffffffa0d82483>] ubi_change_vtbl_record+0x103/0x1c0 [ubi]
[ 757.908359] [<ffffffff81234474>] ? device_create_file+0x14/0x20
[ 757.908374] [<ffffffffa0d837ee>] ubi_create_volume+0x4ce/0x710 [ubi]
[ 757.908388] [<ffffffff8103418b>] ? release_console_sem+0x1eb/0x240
[ 757.908404] [<ffffffffa0d86589>] ubi_cdev_ioctl+0x2e9/0xb50 [ubi]
[ 757.908418] [<ffffffff810bf399>] ? __dentry_open+0x149/0x330
[ 757.908431] [<ffffffff810d0658>] vfs_ioctl+0x38/0xd0
[ 757.908443] [<ffffffff810d082a>] do_vfs_ioctl+0x8a/0x5b0
[ 757.908455] [<ffffffff8105e69d>] ? trace_hardirqs_on+0xd/0x10
[ 757.908467] [<ffffffff810d0d9a>] sys_ioctl+0x4a/0x80
[ 757.908479] [<ffffffff81002cab>] system_call_fastpath+0x16/0x1b
[ 757.908543] UBI DBG (pid 4580): ubi_dbg_dump_flash: dumping 256 bytes of data from PEB 0, offset 256
[ 757.908560] 00000000: 55 42 49 21 01 01 00 05 7f ff ef ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 UBI!............................
[ 757.908582] 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 d8 79 d1 e3 .............................y..
[ 757.908605] 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.908628] 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.908650] 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.908673] 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.908695] 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.908718] 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................................
[ 757.908752] UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 2147479551:0, PEB 0
[ 757.908788] UBI: run torture test for PEB 0
[ 757.909892] UBI: PEB 0 passed torture test, do not mark it a bad
[ 757.909971] UBI: try another PEB
[ 757.909987] UBI error: ubi_io_write: error -5 while writing 256 bytes to PEB 0:256, written 0 bytes
[ 757.910214] Pid: 4580, comm: ubimkvol Tainted: P 2.6.33-rc8-wl #25
What I did so far:
sudo modprobe nandsim
sudo modprobe ubi
sudo ubiformat /dev/mtd0
sudo ubiattach /dev/ubi_ctrl -m0 -d 0
sudo ubimkvol -m -N test /dev/ubi0
Then I suppose I can mount /dev/ubi0 with ubifs, right?
(If there were no errors of course)
Best regards,
Maxim Levitsky
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/