Re: Gspca USB driver zc3xx and STV06xx probe the same device ..

[Hans de Goede]

Hi,

On 03/03/2010 02:17 PM, Erik Andrén wrote:
> 2010/3/3 Gabriel C<nix.or.die@xxxxxxxxxxxxxx>:
> > Hello,
> >
> > I own a QuickCam Messanger webcam.. I didn't used it in ages but today
> > I plugged it in..
> > ( Device 002: ID 046d:08da Logitech, Inc. QuickCam Messanger )
> >
> > Now zc3xx and stv06xx are starting both to probe the device .. In
> > 2.6.33 that result in a not working webcam.
> > ( rmmod both&&  modprobe zc3xx one seems to fix that )
> >
> > On current git head zc3xx works fine even when both are probing the device.
> >
> > Also I noticed stv06xx fails anyway for my webcam with this error:
> > ....
> >
> > [  360.910243] STV06xx: Configuring camera
> > [  360.910244] STV06xx: st6422 sensor detected
> > [  360.910245] STV06xx: Initializing camera
> > [  361.161948] STV06xx: probe of 6-1:1.0 failed with error -32
> > [  361.161976] usbcore: registered new interface driver STV06xx
> > [  361.161978] STV06xx: registered
> > .....
> >
> > Next thing is stv06xx tells it is an st6422 sensor and does not work
> > with it while zc3xx tells it is an HV7131R(c) sensor and works fine
> > with it.
> >
> > What is right ?
>
> Hans,
> As you added support for the st6422 sensor to the stv06xx subdriver I
> imagine you best know what's going on.

I took the USB-ID in question from the out of tree v4l1 driver I was basing my
st6422 work on. Looking at the other ID's (which are very close together) and
combining that with this bug report, I think it is safe to say that the USB-ID
in question should be removed from the stv06xx driver.

Erik will you handle this, or shall I ?

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/