[PATCH 3/4] x86: use wake_system_ram_range instead of e820_any_mappedin agp path

[Yinghai Lu]

put apterture_valid back to .c
and early path still use e820_any_mapped()

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>

---
 arch/x86/include/asm/gart.h   |   22 ----------------------
 arch/x86/kernel/aperture_64.c |   22 ++++++++++++++++++++++
 drivers/char/agp/amd64-agp.c  |   39 ++++++++++++++++++++++++++++++++++++++-
 3 files changed, 60 insertions(+), 23 deletions(-)

Index: linux-2.6/arch/x86/include/asm/gart.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/gart.h
+++ linux-2.6/arch/x86/include/asm/gart.h
@@ -74,26 +74,4 @@ static inline void enable_gart_translati
         pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
 }
 
-static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
-{
-	if (!aper_base)
-		return 0;
-
-	if (aper_base + aper_size > 0x100000000ULL) {
-		printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
-		return 0;
-	}
-	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
-		printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
-		return 0;
-	}
-	if (aper_size < min_size) {
-		printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
-				 aper_size>>20, min_size>>20);
-		return 0;
-	}
-
-	return 1;
-}
-
 #endif /* _ASM_X86_GART_H */
Index: linux-2.6/arch/x86/kernel/aperture_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/aperture_64.c
+++ linux-2.6/arch/x86/kernel/aperture_64.c
@@ -146,6 +146,28 @@ static u32 __init find_cap(int bus, int
 	return 0;
 }
 
+static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
+{
+	if (!aper_base)
+		return 0;
+
+	if (aper_base + aper_size > 0x100000000ULL) {
+		printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
+		return 0;
+	}
+	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
+		printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
+		return 0;
+	}
+	if (aper_size < min_size) {
+		printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
+				 aper_size>>20, min_size>>20);
+		return 0;
+	}
+
+	return 1;
+}
+
 /* Read a standard AGPv3 bridge header */
 static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
 {
Index: linux-2.6/drivers/char/agp/amd64-agp.c
===================================================================
--- linux-2.6.orig/drivers/char/agp/amd64-agp.c
+++ linux-2.6/drivers/char/agp/amd64-agp.c
@@ -14,7 +14,6 @@
 #include <linux/agp_backend.h>
 #include <linux/mmzone.h>
 #include <asm/page.h>		/* PAGE_SIZE */
-#include <asm/e820.h>
 #include <asm/k8.h>
 #include <asm/gart.h>
 #include "agp.h"
@@ -231,6 +230,44 @@ static const struct agp_bridge_driver am
 	.agp_type_to_mask_type  = agp_generic_type_to_mask_type,
 };
 
+static int __devinit
+__is_ram(unsigned long pfn, unsigned long nr_pages, void *arg)
+{
+	return 1;
+}
+
+static int __devinit any_ram_in_range(u64 base, u64 size)
+{
+	unsigned long pfn, nr_pages;
+
+	pfn = base >> PAGE_SHIFT;
+	nr_pages = size >> PAGE_SHIFT;
+
+	return walk_system_ram_range(pfn, nr_pages, NULL, __is_ram) == 1;
+}
+
+static int __devinit aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
+{
+	if (!aper_base)
+		return 0;
+
+	if (aper_base + aper_size > 0x100000000ULL) {
+		printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
+		return 0;
+	}
+	if (any_ram_in_range(aper_base, aper_size)) {
+		printk(KERN_INFO "Aperture pointing to E820 RAM. Ignoring.\n");
+		return 0;
+	}
+	if (aper_size < min_size) {
+		printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
+				 aper_size>>20, min_size>>20);
+		return 0;
+	}
+
+	return 1;
+}
+
 /* Some basic sanity checks for the aperture. */
 static int __devinit agp_aperture_valid(u64 aper, u32 size)
 {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/