Re: bit errors on spitz

[Stanislav Brabec]

Andy Green wrote:

> I saw very similar failures for a long time on our iMX31 based device. 
> Eventually I found a Freescale errata where the RAM inside the USB2 
> macrocell started to make single bit errors below 1.38V Vcore; ours was 
> 1.4V at that time but dipped on CPU load.

Good tip. It seems that nobody ported driver for the voltage control
chip ISL6271 from 2.4 kernel, and bootloader probably does not set
correct values.

Datasheet:
http://www.penguin.cz/~utx/zaurus/datasheets/power/Xscale/ISL6271.pdf

-- 
Stanislav Brabec
http://www.penguin.cz/~utx/zaurus

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/