[patch 014/123] V4L/DVB (13991): gspca_mr973010a: Fix cif type 1 cameras not streaming on UHCI controllers

[Greg KH]

2.6.33-stable review patch.  If anyone has any objections, please let me know.

-----------------

From: Theodore Kilgore <kilgota@xxxxxxxxxx>

commit 70136081fc67ea77d849f86fa323e5773c8e40ea upstream.

If you read the mail to Oliver Neukum on the linux-usb list, then you know
that I found a cure for the mysterious problem that the MR97310a CIF "type
1" cameras have been freezing up and refusing to stream if hooked up to a
machine with a UHCI controller.

Namely, the cure is that if the camera is an mr97310a CIF type 1 camera, you
have to send it 0xa0, 0x00. Somehow, this is a timing reset command, or
such. It un-blocks whatever was previously stopping the CIF type 1 cameras
from working on the UHCI-based machines.

Signed-off-by: Theodore Kilgore <kilgota@xxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
 drivers/media/video/gspca/mr97310a.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -697,6 +697,12 @@ static int start_cif_cam(struct gspca_de
 			{0x13, 0x00, {0x01}, 1},
 			{0, 0, {0}, 0}
 		};
+		/* Without this command the cam won't work with USB-UHCI */
+		gspca_dev->usb_buf[0] = 0x0a;
+		gspca_dev->usb_buf[1] = 0x00;
+		err_code = mr_write(gspca_dev, 2);
+		if (err_code < 0)
+			return err_code;
 		err_code = sensor_write_regs(gspca_dev, cif_sensor1_init_data,
 					 ARRAY_SIZE(cif_sensor1_init_data));
 	}


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/