[tip:timers/cleanup] cris: Convert cris to use read/update_persistent_clock
From: tip-bot for John Stultz
Date: Fri Mar 12 2010 - 19:23:05 EST
Commit-ID: 8eff8a5c1d3a1de7a2d173e0effc6cc9bcbb5177
Gitweb: http://git.kernel.org/tip/8eff8a5c1d3a1de7a2d173e0effc6cc9bcbb5177
Author: John Stultz <johnstul@xxxxxxxxxx>
AuthorDate: Wed, 3 Mar 2010 19:57:28 -0800
Committer: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
CommitDate: Sat, 13 Mar 2010 01:14:13 +0100
cris: Convert cris to use read/update_persistent_clock
This patch converts the cris architecture to use the generic
read_persistent_clock and update_persistent_clock interfaces, reducing
the amount of arch specific code we have to maintain, and allowing for
further cleanups in the future.
I have not built or tested this patch, so help from arch maintainers
would be appreciated.
Signed-off-by: John Stultz <johnstul@xxxxxxxxxx>
Cc: Mikael Starvik <starvik@xxxxxxxx>
Cc: Jesper Nilsson <jesper.nilsson@xxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
LKML-Reference: <1267675049-12337-14-git-send-email-johnstul@xxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
---
arch/cris/Kconfig | 3 ++
arch/cris/arch-v10/kernel/time.c | 37 +---------------------------------
arch/cris/arch-v32/kernel/time.c | 40 +------------------------------------
arch/cris/kernel/time.c | 20 ++++++++++--------
4 files changed, 18 insertions(+), 82 deletions(-)
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 059eac6..e25bf44 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -23,6 +23,9 @@ config RWSEM_XCHGADD_ALGORITHM
config GENERIC_TIME
def_bool y
+config GENERIC_CMOS_UPDATE
+ def_bool y
+
config ARCH_USES_GETTIMEOFFSET
def_bool y
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 31ca141..30adae5 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -26,7 +26,6 @@
/* it will make jiffies at 96 hz instead of 100 hz though */
#undef USE_CASCADE_TIMERS
-extern void update_xtime_from_cmos(void);
extern int set_rtc_mmss(unsigned long nowtime);
extern int have_rtc;
@@ -188,8 +187,6 @@ stop_watchdog(void)
#endif
}
-/* last time the cmos clock got updated */
-static long last_rtc_update = 0;
/*
* timer_interrupt() needs to keep up the real-time clock,
@@ -232,24 +229,6 @@ timer_interrupt(int irq, void *dev_id)
do_timer(1);
cris_do_profile(regs); /* Save profiling information */
-
- /*
- * If we have an externally synchronized Linux clock, then update
- * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- *
- * The division here is not time critical since it will run once in
- * 11 minutes
- */
- if (ntp_synced() &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
- if (set_rtc_mmss(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
- }
return IRQ_HANDLED;
}
@@ -274,22 +253,10 @@ time_init(void)
*/
loops_per_usec = 50;
- if(RTC_INIT() < 0) {
- /* no RTC, start at 1980 */
- xtime.tv_sec = 0;
- xtime.tv_nsec = 0;
+ if(RTC_INIT() < 0)
have_rtc = 0;
- } else {
- /* get the current time */
+ else
have_rtc = 1;
- update_xtime_from_cmos();
- }
-
- /*
- * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
- * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
- */
- set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
/* Setup the etrax timers
* Base frequency is 25000 hz, divider 250 -> 100 HZ
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index b1920d8..1ee0e10 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -44,7 +44,6 @@ unsigned long timer_regs[NR_CPUS] =
#endif
};
-extern void update_xtime_from_cmos(void);
extern int set_rtc_mmss(unsigned long nowtime);
extern int have_rtc;
@@ -198,9 +197,6 @@ handle_watchdog_bite(struct pt_regs* regs)
#endif
}
-/* Last time the cmos clock got updated. */
-static long last_rtc_update = 0;
-
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick.
@@ -238,25 +234,6 @@ timer_interrupt(int irq, void *dev_id)
/* Call the real timer interrupt handler */
do_timer(1);
-
- /*
- * If we have an externally synchronized Linux clock, then update
- * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- *
- * The division here is not time critical since it will run once in
- * 11 minutes
- */
- if ((time_status & STA_UNSYNC) == 0 &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
- if (set_rtc_mmss(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- /* Do it again in 60 s */
- last_rtc_update = xtime.tv_sec - 600;
- }
return IRQ_HANDLED;
}
@@ -309,23 +286,10 @@ time_init(void)
*/
loops_per_usec = 50;
- if(RTC_INIT() < 0) {
- /* No RTC, start at 1980 */
- xtime.tv_sec = 0;
- xtime.tv_nsec = 0;
+ if(RTC_INIT() < 0)
have_rtc = 0;
- } else {
- /* Get the current time */
+ else
have_rtc = 1;
- update_xtime_from_cmos();
- }
-
- /*
- * Initialize wall_to_monotonic such that adding it to
- * xtime will yield zero, the tv_nsec field must be normalized
- * (i.e., 0 <= nsec < NSEC_PER_SEC).
- */
- set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
/* Start CPU local timer. */
cris_timer_init();
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index a05dd31..c72730d 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -98,6 +98,8 @@ unsigned long
get_cmos_time(void)
{
unsigned int year, mon, day, hour, min, sec;
+ if(!have_rtc)
+ return 0;
sec = CMOS_READ(RTC_SECONDS);
min = CMOS_READ(RTC_MINUTES);
@@ -119,19 +121,19 @@ get_cmos_time(void)
return mktime(year, mon, day, hour, min, sec);
}
-/* update xtime from the CMOS settings. used when /dev/rtc gets a SET_TIME.
- * TODO: this doesn't reset the fancy NTP phase stuff as do_settimeofday does.
- */
-void
-update_xtime_from_cmos(void)
+int update_persistent_clock(struct timespec now)
{
- if(have_rtc) {
- xtime.tv_sec = get_cmos_time();
- xtime.tv_nsec = 0;
- }
+ return set_rtc_mmss(now.tv_sec);
}
+void read_persistent_clock(struct timespec *ts)
+{
+ ts->tv_sec = get_cmos_time();
+ ts->tv_nsec = 0;
+}
+
+
extern void cris_profile_sample(struct pt_regs* regs);
void
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/