[PATCH 2/2] DMAENGINE: U300 platform configuration

From: Linus Walleij
Date: Sat Mar 13 2010 - 04:43:06 EST

Next message: florian: "[PATCH] rename new rfkill sysfs knobs"
Previous message: Linus Walleij: "[PATCH 1/2] DMAENGINE: Support for ST-Ericssons DMA40 block"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This completes the DMA40 support with the platform-specific
configuration for U8500/DB8500.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
---
arch/arm/mach-ux500/board-mop500.c | 222 +++++++++++++++++++++
arch/arm/mach-ux500/clock.c | 4 +-
arch/arm/mach-ux500/include/mach/hardware.h | 16 ++-
arch/arm/mach-ux500/include/mach/ste_dma40.h | 268 ++++++++++++++++++++++++++
arch/arm/mach-ux500/ste-dma40-db8500.h | 133 +++++++++++++
5 files changed, 640 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-ux500/include/mach/ste_dma40.h
create mode 100644 arch/arm/mach-ux500/ste-dma40-db8500.h

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 4335186..cfcc5cb 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -16,6 +16,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/spi/spi.h>
+#include <mach/ste_dma40.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -25,6 +26,8 @@
#include <mach/hardware.h>
#include <mach/setup.h>

+#include "ste-dma40-db8500.h"
+
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}

@@ -183,6 +186,221 @@ U8500_I2C_PDEVICE(1);
U8500_I2C_PDEVICE(2);
U8500_I2C_PDEVICE(3);

+static struct resource dma40_resources[] = {
+ [0] = {
+ .start = U8500_DMA_BASE_V1,
+ .end = U8500_DMA_BASE_V1 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "base",
+ },
+ [1] = {
+ .start = U8500_DMA_LCPA_BASE,
+ .end = U8500_DMA_LCPA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcpa",
+ },
+ [2] = {
+ .start = U8500_DMA_LCLA_BASE,
+ .end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcla",
+ },
+ [3] = {
+ .start = IRQ_DMA,
+ .end = IRQ_DMA,
+ .flags = IORESOURCE_IRQ}
+};
+
+/* Default configuration for physcial memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+ .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
+ STEDMA40_LOW_PRIORITY_CHANNEL |
+ STEDMA40_PCHAN_BASIC_MODE),
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_PHY_1,
+
+ .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+
+};
+/* Default configuration for logical memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+ .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
+ STEDMA40_LOW_PRIORITY_CHANNEL |
+ STEDMA40_LCHAN_SRC_LOG_DST_LOG |
+ STEDMA40_NO_TIM_FOR_LINK),
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+
+ .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+
+};
+
+/*
+ * Mapping between destination event lines and physical device address.
+ * The event line is tied to a device and therefor the address is constant.
+ */
+const static dma_addr_t dma40_tx_map[STEDMA40_DEV_MAX] = {
+ [STEDMA40_DEV_SPI0_TX] = 0,
+ [STEDMA40_DEV_SD_MMC0_TX] = 0,
+ [STEDMA40_DEV_SD_MMC1_TX] = 0,
+ [STEDMA40_DEV_SD_MMC2_TX] = 0,
+ [STEDMA40_DEV_I2C1_TX] = 0,
+ [STEDMA40_DEV_I2C3_TX] = 0,
+ [STEDMA40_DEV_I2C2_TX] = 0,
+ [STEDMA40_DEV_SSP0_TX] = 0,
+ [STEDMA40_DEV_SSP1_TX] = 0,
+ [STEDMA40_DEV_UART2_TX] = 0,
+ [STEDMA40_DEV_UART1_TX] = 0,
+ [STEDMA40_DEV_UART0_TX] = 0,
+ [STEDMA40_DEV_MSP2_TX] = 0,
+ [STEDMA40_DEV_I2C0_TX] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_8] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_1_9] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_2_10] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_3_11] = 0,
+ [STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0] = 0,
+ [STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1] = 0,
+ [STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2] = 0,
+ [STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3] = 0,
+ [STEDMA40_DEV_DST_SXA0_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA1_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA2_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA3_RX_TX] = 0,
+ [STEDMA40_DEV_SD_MM2_TX] = 0,
+ [STEDMA40_DEV_SD_MM0_TX] = 0,
+ [STEDMA40_DEV_MSP1_TX] = 0,
+ [STEDMA40_SLIM0_CH0_TX] = 0,
+ [STEDMA40_DEV_MSP0_TX] = 0,
+ [STEDMA40_DEV_SD_MM1_TX] = 0,
+ [STEDMA40_DEV_SPI2_TX] = 0,
+ [STEDMA40_DEV_I2C3_TX2] = 0,
+ [STEDMA40_DEV_SPI1_TX] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_4_12] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_5_13] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_6_14] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_7_15] = 0,
+ [STEDMA40_DEV_SPI3_TX] = 0,
+ [STEDMA40_DEV_SD_MM3_TX] = 0,
+ [STEDMA40_DEV_SD_MM4_TX] = 0,
+ [STEDMA40_DEV_SD_MM5_TX] = 0,
+ [STEDMA40_DEV_DST_SXA4_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA5_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA6_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA7_RX_TX] = 0,
+ [STEDMA40_DEV_CAC1_TX] = 0,
+ [STEDMA40_DEV_CAC1_TX_HAC1_TX] = 0,
+ [STEDMA40_DEV_HAC1_TX] = 0,
+ [STEDMA40_DEV_CAC0_TX] = 0,
+ [STEDMA40_DEV_CAC0_TX_HAC0_TX] = 0,
+ [STEDMA40_DEV_HAC0_TX] = 0,
+};
+
+/* Mapping between source event lines and physical device address */
+const static dma_addr_t dma40_rx_map[STEDMA40_DEV_MAX] = {
+ [STEDMA40_DEV_SPI0_RX] = 0,
+ [STEDMA40_DEV_SD_MMC0_RX] = 0,
+ [STEDMA40_DEV_SD_MMC1_RX] = 0,
+ [STEDMA40_DEV_SD_MMC2_RX] = 0,
+ [STEDMA40_DEV_I2C1_RX] = 0,
+ [STEDMA40_DEV_I2C3_RX] = 0,
+ [STEDMA40_DEV_I2C2_RX] = 0,
+ [STEDMA40_DEV_SSP0_RX] = 0,
+ [STEDMA40_DEV_SSP1_RX] = 0,
+ [STEDMA40_DEV_MCDE_RX] = 0,
+ [STEDMA40_DEV_UART2_RX] = 0,
+ [STEDMA40_DEV_UART1_RX] = 0,
+ [STEDMA40_DEV_UART0_RX] = 0,
+ [STEDMA40_DEV_MSP2_RX] = 0,
+ [STEDMA40_DEV_I2C0_RX] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_8] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_1_9] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_2_10] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_3_11] = 0,
+ [STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0] = 0,
+ [STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1] = 0,
+ [STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2] = 0,
+ [STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3] = 0,
+ [STEDMA40_DEV_SRC_SXA0_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA1_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA2_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA3_RX_TX] = 0,
+ [STEDMA40_DEV_SD_MM2_RX] = 0,
+ [STEDMA40_DEV_SD_MM0_RX] = 0,
+ [STEDMA40_DEV_MSP1_RX] = 0,
+ [STEDMA40_SLIM0_CH0_RX] = 0,
+ [STEDMA40_DEV_MSP0_RX] = 0,
+ [STEDMA40_DEV_SD_MM1_RX] = 0,
+ [STEDMA40_DEV_SPI2_RX] = 0,
+ [STEDMA40_DEV_I2C3_RX2] = 0,
+ [STEDMA40_DEV_SPI1_RX] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_4_12] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_5_13] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_6_14] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_7_15] = 0,
+ [STEDMA40_DEV_SPI3_RX] = 0,
+ [STEDMA40_DEV_SD_MM3_RX] = 0,
+ [STEDMA40_DEV_SD_MM4_RX] = 0,
+ [STEDMA40_DEV_SD_MM5_RX] = 0,
+ [STEDMA40_DEV_SRC_SXA4_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA5_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA6_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA7_RX_TX] = 0,
+ [STEDMA40_DEV_CAC1_RX] = 0,
+ [STEDMA40_DEV_MSHC_RX] = 0,
+ [STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4] = 0,
+ [STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5] = 0,
+ [STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6] = 0,
+ [STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7] = 0,
+ [STEDMA40_DEV_CAC0_RX] = 0,
+};
+
+/* Reserved event lines for memcpy only */
+static int dma40_memcpy_event[] = {
+ STEDMA40_MEMCPY_TX_1,
+ STEDMA40_MEMCPY_TX_2,
+ STEDMA40_MEMCPY_TX_3,
+ STEDMA40_MEMCPY_TX_4,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+ .dev_len = STEDMA40_DEV_MAX,
+ .dev_rx = dma40_rx_map,
+ .dev_tx = dma40_tx_map,
+ .memcpy = dma40_memcpy_event,
+ .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+ .memcpy_conf_phy = &dma40_memcpy_conf_phy,
+ .memcpy_conf_log = &dma40_memcpy_conf_log,
+ .llis_per_log = 8,
+};
+
+static struct platform_device dma40_device = {
+ .dev = {
+ .platform_data = &dma40_plat_data,
+ },
+ .name = "dma40",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dma40_resources),
+ .resource = dma40_resources
+};
+
+static void dma40_u8500ed_updates(void)
+{
+ dma40_plat_data.memcpy = NULL;
+ dma40_plat_data.memcpy_len = 0;
+ dma40_resources[0].start = U8500_DMA_BASE_ED;
+ dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
+}
+
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
&uart1_device,
@@ -197,12 +415,16 @@ static struct platform_device *platform_devs[] __initdata = {
&i2c_controller1,
&i2c_controller2,
&i2c_controller3,
+ &dma40_device,
};

static void __init u8500_init_machine(void)
{
int i;

+ if (cpu_is_u8500ed())
+ dma40_u8500ed_updates();
+
/* Register the active AMBA devices on this board */
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index d16b8b5..74cdba2 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -1,6 +1,5 @@
/*
* Copyright (C) 2009 ST-Ericsson
- * Copyright (C) 2009 STMicroelectronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -170,6 +169,7 @@ static void clk_prcmu_disable(struct clk *clk)
}

/* ED doesn't have the combined set/clr registers */
+
static void clk_prcmu_ed_enable(struct clk *clk)
{
void __iomem *addr = __io_address(U8500_PRCMU_BASE)
@@ -407,7 +407,7 @@ static struct clk_lookup u8500_common_clks[] = {
CLK(apetraceclk, "apetrace", NULL),
CLK(mcdeclk, "mcde", NULL),
CLK(ipi2clk, "ipi2", NULL),
- CLK(dmaclk, "dma40", NULL),
+ CLK(dmaclk, "dma40.0", NULL),
CLK(b2r2clk, "b2r2", NULL),
CLK(tvclk, "tv", NULL),
};
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 99ca89f..5d12212 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -26,6 +26,19 @@
/* used by some plat-nomadik code */
#define io_p2v(n) __io_address(n)

+
+/* Base address and bank offsets for ESRAM */
+#define U8500_ESRAM_BASE 0x40000000
+#define U8500_ESRAM_BANK_SIZE 0x00020000
+#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE
+#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
+/* Use bank 4 for DMA LCLA and LCPA */
+#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4
+#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK4 + 0x4000)
+
/*
* Base address definitions for U8500 Onchip IPs. All the
* peripherals are contained in a single 1 Mbyte region, with
@@ -47,7 +60,8 @@

#define U8500_SGA_BASE 0xa0300000
#define U8500_MCDE_BASE 0xa0350000
-#define U8500_DMA_BASE 0xa0362000
+#define U8500_DMA_BASE_ED 0xa0362000
+#define U8500_DMA_BASE_V1 0x801C0000

#define U8500_SCU_BASE 0xa0410000
#define U8500_GIC_CPU_BASE 0xa0410100
diff --git a/arch/arm/mach-ux500/include/mach/ste_dma40.h b/arch/arm/mach-ux500/include/mach/ste_dma40.h
new file mode 100644
index 0000000..e66424a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/ste_dma40.h
@@ -0,0 +1,268 @@
+/*
+ * arch/arm/mach-ux500/include/mach/ste_dma40.h
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@xxxxxxxxxxxxxx>
+ * Author: Jonas Aaberg <jonas.aberg@xxxxxxxxxxxxxx>
+ */
+
+
+#ifndef STE_DMA40_H
+#define STE_DMA40_H
+
+#include <linux/dmaengine.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+
+/* dev types for memcpy */
+#define STEDMA40_DEV_DST_MEMORY (-1)
+#define STEDMA40_DEV_SRC_MEMORY (-1)
+
+/*
+ * Description of bitfields of channel_type variable is available in
+ * the info structure.
+ */
+
+/* Priority */
+#define STEDMA40_INFO_PRIO_TYPE_POS 2
+#define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS)
+#define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS)
+
+/* Mode */
+#define STEDMA40_INFO_CH_MODE_TYPE_POS 6
+#define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS)
+#define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS)
+#define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS)
+
+/* Mode options */
+#define STEDMA40_INFO_CH_MODE_OPT_POS 8
+#define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
+
+/* Interrupt */
+#define STEDMA40_INFO_TIM_POS 10
+#define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS)
+#define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS)
+
+/* End of channel_type configuration */
+
+#define STEDMA40_ESIZE_8_BIT 0x0
+#define STEDMA40_ESIZE_16_BIT 0x1
+#define STEDMA40_ESIZE_32_BIT 0x2
+#define STEDMA40_ESIZE_64_BIT 0x3
+
+/* The value 4 indicates that PEN-reg shall be set to 0 */
+#define STEDMA40_PSIZE_PHY_1 0x4
+#define STEDMA40_PSIZE_PHY_2 0x0
+#define STEDMA40_PSIZE_PHY_4 0x1
+#define STEDMA40_PSIZE_PHY_8 0x2
+#define STEDMA40_PSIZE_PHY_16 0x3
+
+/*
+ * The number of elements differ in logical and
+ * physical mode
+ */
+#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2
+#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4
+#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8
+#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
+
+enum stedma40_flow_ctrl {
+ STEDMA40_NO_FLOW_CTRL,
+ STEDMA40_FLOW_CTRL,
+};
+
+enum stedma40_endianess {
+ STEDMA40_LITTLE_ENDIAN,
+ STEDMA40_BIG_ENDIAN
+};
+
+enum stedma40_periph_data_width {
+ STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
+ STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
+ STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
+ STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
+};
+
+struct stedma40_half_channel_info {
+ enum stedma40_endianess endianess;
+ enum stedma40_periph_data_width data_width;
+ int psize;
+ enum stedma40_flow_ctrl flow_ctrl;
+};
+
+enum stedma40_xfer_dir {
+ STEDMA40_MEM_TO_MEM,
+ STEDMA40_MEM_TO_PERIPH,
+ STEDMA40_PERIPH_TO_MEM,
+ STEDMA40_PERIPH_TO_PERIPH
+};
+
+
+/**
+ * struct stedma40_chan_cfg - Structure to be filled by client drivers.
+ *
+ * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
+ * @channel_type: priority, mode, mode options and interrupt configuration.
+ * @src_dev_type: Src device type
+ * @dst_dev_type: Dst device type
+ * @src_info: Parameters for dst half channel
+ * @dst_info: Parameters for dst half channel
+ * @pre_transfer_data: Data to be passed on to the pre_transfer() function.
+ * @pre_transfer: Callback used if needed before preparation of transfer.
+ * Only called if device is set. size of bytes to transfer
+ * (in case of multiple element transfer size is size of the first element).
+ *
+ *
+ * This structure has to be filled by the client drivers.
+ * It is recommended to do all dma configurations for clients in the machine.
+ *
+ */
+struct stedma40_chan_cfg {
+ enum stedma40_xfer_dir dir;
+ unsigned int channel_type;
+ int src_dev_type;
+ int dst_dev_type;
+ struct stedma40_half_channel_info src_info;
+ struct stedma40_half_channel_info dst_info;
+ void *pre_transfer_data;
+ int (*pre_transfer) (struct dma_chan *chan,
+ void *data,
+ int size);
+};
+
+/**
+ * struct stedma40_platform_data - Configuration struct for the dma device.
+ *
+ * @dev_len: length of dev_tx and dev_rx
+ * @dev_tx: mapping between destination event line and io address
+ * @dev_rx: mapping between source event line and io address
+ * @memcpy: list of memcpy event lines
+ * @memcpy_len: length of memcpy
+ * @memcpy_conf_phy: default configuration of physical channel memcpy
+ * @memcpy_conf_log: default configuration of logical channel memcpy
+ * @llis_per_log: number of max linked list items per logical channel
+ *
+ */
+struct stedma40_platform_data {
+ u32 dev_len;
+ const dma_addr_t *dev_tx;
+ const dma_addr_t *dev_rx;
+ int *memcpy;
+ u32 memcpy_len;
+ struct stedma40_chan_cfg *memcpy_conf_phy;
+ struct stedma40_chan_cfg *memcpy_conf_log;
+ unsigned int llis_per_log;
+};
+
+/**
+ * setdma40_set_psize() - Used for changing the package size of an
+ * already configured dma channel.
+ *
+ * @chan: dmaengine handle
+ * @src_psize: new package side for src. (STEDMA40_PSIZE*)
+ * @src_psize: new package side for dst. (STEDMA40_PSIZE*)
+ *
+ * returns 0 on ok, otherwise negative error number.
+ */
+int stedma40_set_psize(struct dma_chan *chan,
+ int src_psize,
+ int dst_psize);
+
+
+/**
+ * setdma40_pause() - Pause an ongoing dma transfer.
+ *
+ * @chan: dmaengine handle
+ *
+ * returns 0 on ok, otherwise negative error number.
+ */
+int stedma40_pause(struct dma_chan *chan);
+
+/**
+ * setdma40_unpause() - Resumes an paused dma transfer.
+ *
+ * @chan: dmaengine handle
+ *
+ * returns 0 on ok, otherwise negative error number.
+ */
+int stedma40_unpause(struct dma_chan *chan);
+
+/**
+ * setdma40_residue() - Returna the remaining bytes to transfer.
+ *
+ * @chan: dmaengine handle
+ *
+ * returns 0 or positive number of remaning bytes,
+ * otherwise negative error number.
+ */
+int stedma40_residue(struct dma_chan *chan);
+
+/**
+ * stedma40_filter() - Provides stedma40_chan_cfg to the
+ * ste_dma40 dma driver via the dmaengine framework.
+ * does some checking of what's provided.
+ *
+ * Never directly called by client. It used by dmaengine.
+ * @chan: dmaengine handle.
+ * @data: Must be of type: struct stedma40_chan_cfg and is
+ * the configuration of the framework.
+ *
+ *
+ */
+
+bool stedma40_filter(struct dma_chan *chan, void *data);
+
+/**
+ * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from
+ * scattergatter lists.
+ *
+ * @chan: dmaengine handle
+ * @sgl_dst: Destination scatter list
+ * @sgl_src: Source scatter list
+ * @sgl_len: The length of each scatterlist. Both lists must be of equal length
+ * and each element must match the corresponding element in the other scatter
+ * list.
+ * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
+ */
+
+struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
+ struct scatterlist *sgl_dst,
+ struct scatterlist *sgl_src,
+ unsigned int sgl_len,
+ unsigned long flags);
+
+/**
+ * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
+ * (=device)
+ *
+ * @chan: dmaengine handle
+ * @addr: source or destination physicall address.
+ * @size: bytes to transfer
+ * @direction: direction of transfer
+ * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
+ */
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+ dma_addr_t addr,
+ unsigned int size,
+ enum dma_data_direction direction,
+ unsigned long flags)
+{
+ struct scatterlist sg;
+ sg_init_table(&sg, 1);
+ sg.dma_address = addr;
+ sg.length = size;
+
+ return chan->device->device_prep_slave_sg(chan, &sg, 1,
+ direction, flags);
+}
+
+#endif
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
new file mode 100644
index 0000000..8a4994e
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-ux500/ste_dma40_db8500.h
+ * DB8500-SoC-specific configuration for DMA40
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@xxxxxxxxxxxxxx>
+ * Author: Jonas Aaberg <jonas.aberg@xxxxxxxxxxxxxx>
+ */
+#ifndef STE_DMA40_DB8500_H
+#define STE_DMA40_DB8500_H
+
+#define STEDMA40_DEV_MAX 64
+
+enum dma_src_dev_type {
+ STEDMA40_DEV_SPI0_RX = 0,
+ STEDMA40_DEV_SD_MMC0_RX,
+ STEDMA40_DEV_SD_MMC1_RX,
+ STEDMA40_DEV_SD_MMC2_RX,
+ STEDMA40_DEV_I2C1_RX,
+ STEDMA40_DEV_I2C3_RX,
+ STEDMA40_DEV_I2C2_RX,
+ STEDMA40_DEV_SSP0_RX = 8,
+ STEDMA40_DEV_SSP1_RX,
+ STEDMA40_DEV_MCDE_RX,
+ STEDMA40_DEV_UART2_RX,
+ STEDMA40_DEV_UART1_RX,
+ STEDMA40_DEV_UART0_RX,
+ STEDMA40_DEV_MSP2_RX,
+ STEDMA40_DEV_I2C0_RX, /*15*/
+ STEDMA40_DEV_USB_OTG_IEP_8,
+ STEDMA40_DEV_USB_OTG_IEP_1_9,
+ STEDMA40_DEV_USB_OTG_IEP_2_10,
+ STEDMA40_DEV_USB_OTG_IEP_3_11,
+ STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0,
+ STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1,
+ STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2,
+ STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3,
+ STEDMA40_DEV_SRC_SXA0_RX_TX,
+ STEDMA40_DEV_SRC_SXA1_RX_TX,
+ STEDMA40_DEV_SRC_SXA2_RX_TX,
+ STEDMA40_DEV_SRC_SXA3_RX_TX,
+ STEDMA40_DEV_SD_MM2_RX,
+ STEDMA40_DEV_SD_MM0_RX,
+ STEDMA40_DEV_MSP1_RX,
+ STEDMA40_SLIM0_CH0_RX,
+ STEDMA40_DEV_MSP0_RX = STEDMA40_SLIM0_CH0_RX,
+ STEDMA40_DEV_SD_MM1_RX,
+ STEDMA40_DEV_SPI2_RX,
+ STEDMA40_DEV_I2C3_RX2,
+ STEDMA40_DEV_SPI1_RX,
+ STEDMA40_DEV_USB_OTG_IEP_4_12,
+ STEDMA40_DEV_USB_OTG_IEP_5_13,
+ STEDMA40_DEV_USB_OTG_IEP_6_14,
+ STEDMA40_DEV_USB_OTG_IEP_7_15,
+ STEDMA40_DEV_SPI3_RX,
+ STEDMA40_DEV_SD_MM3_RX,
+ STEDMA40_DEV_SD_MM4_RX,
+ STEDMA40_DEV_SD_MM5_RX,
+ STEDMA40_DEV_SRC_SXA4_RX_TX,
+ STEDMA40_DEV_SRC_SXA5_RX_TX,
+ STEDMA40_DEV_SRC_SXA6_RX_TX,
+ STEDMA40_DEV_SRC_SXA7_RX_TX,
+ STEDMA40_DEV_CAC1_RX,
+ STEDMA40_DEV_MSHC_RX = 51,
+ STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4,
+ STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5,
+ STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6,
+ STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7,
+ STEDMA40_DEV_CAC0_RX = 61,
+};
+
+enum dma_dest_dev_type {
+ STEDMA40_DEV_SPI0_TX = 0,
+ STEDMA40_DEV_SD_MMC0_TX,
+ STEDMA40_DEV_SD_MMC1_TX,
+ STEDMA40_DEV_SD_MMC2_TX,
+ STEDMA40_DEV_I2C1_TX,
+ STEDMA40_DEV_I2C3_TX,
+ STEDMA40_DEV_I2C2_TX,
+ STEDMA40_DEV_SSP0_TX = 8,
+ STEDMA40_DEV_SSP1_TX,
+ STEDMA40_DEV_UART2_TX = 11,
+ STEDMA40_DEV_UART1_TX,
+ STEDMA40_DEV_UART0_TX,
+ STEDMA40_DEV_MSP2_TX,
+ STEDMA40_DEV_I2C0_TX,
+ STEDMA40_DEV_USB_OTG_OEP_8,
+ STEDMA40_DEV_USB_OTG_OEP_1_9,
+ STEDMA40_DEV_USB_OTG_OEP_2_10,
+ STEDMA40_DEV_USB_OTG_OEP_3_11,
+ STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0,
+ STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1,
+ STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2,
+ STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3,
+ STEDMA40_DEV_DST_SXA0_RX_TX,
+ STEDMA40_DEV_DST_SXA1_RX_TX,
+ STEDMA40_DEV_DST_SXA2_RX_TX,
+ STEDMA40_DEV_DST_SXA3_RX_TX,
+ STEDMA40_DEV_SD_MM2_TX,
+ STEDMA40_DEV_SD_MM0_TX,
+ STEDMA40_DEV_MSP1_TX,
+ STEDMA40_SLIM0_CH0_TX,
+ STEDMA40_DEV_MSP0_TX = STEDMA40_SLIM0_CH0_TX,
+ STEDMA40_DEV_SD_MM1_TX,
+ STEDMA40_DEV_SPI2_TX,
+ STEDMA40_DEV_I2C3_TX2,
+ STEDMA40_DEV_SPI1_TX,
+ STEDMA40_DEV_USB_OTG_OEP_4_12,
+ STEDMA40_DEV_USB_OTG_OEP_5_13,
+ STEDMA40_DEV_USB_OTG_OEP_6_14,
+ STEDMA40_DEV_USB_OTG_OEP_7_15,
+ STEDMA40_DEV_SPI3_TX,
+ STEDMA40_DEV_SD_MM3_TX,
+ STEDMA40_DEV_SD_MM4_TX,
+ STEDMA40_DEV_SD_MM5_TX,
+ STEDMA40_DEV_DST_SXA4_RX_TX,
+ STEDMA40_DEV_DST_SXA5_RX_TX,
+ STEDMA40_DEV_DST_SXA6_RX_TX,
+ STEDMA40_DEV_DST_SXA7_RX_TX,
+ STEDMA40_DEV_CAC1_TX,
+ STEDMA40_DEV_CAC1_TX_HAC1_TX,
+ STEDMA40_DEV_HAC1_TX,
+ STEDMA40_MEMCPY_TX_1 = 56,
+ STEDMA40_MEMCPY_TX_2,
+ STEDMA40_MEMCPY_TX_3,
+ STEDMA40_MEMCPY_TX_4,
+ STEDMA40_DEV_CAC0_TX = 61,
+ STEDMA40_DEV_CAC0_TX_HAC0_TX,
+ STEDMA40_DEV_HAC0_TX,
+};
+
+#endif
--
1.6.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: florian: "[PATCH] rename new rfkill sysfs knobs"
Previous message: Linus Walleij: "[PATCH 1/2] DMAENGINE: Support for ST-Ericssons DMA40 block"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]