[PATCH 2/4] Fix typo: udpate => update

From: Thomas Weber
Date: Mon Mar 15 2010 - 16:58:20 EST


Signed-off-by: Thomas Weber <swirl@xxxxxx>
---
Documentation/kbuild/kconfig.txt | 2 +-
drivers/firewire/ohci.c | 2 +-
drivers/infiniband/hw/ipath/ipath_iba6110.c | 2 +-
drivers/infiniband/hw/ipath/ipath_iba6120.c | 4 ++--
drivers/infiniband/hw/ipath/ipath_iba7220.c | 2 +-
drivers/isdn/hisax/hfc4s8s_l1.c | 2 +-
drivers/staging/rtl8187se/r8180_core.c | 4 ++--
drivers/staging/rtl8187se/r8180_dm.c | 2 +-
drivers/staging/rtl8187se/r8185b_init.c | 2 +-
fs/jfs/jfs_dmap.c | 2 +-
10 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index 49efae7..b2cb16e 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -96,7 +96,7 @@ Environment variables for 'silentoldconfig'
KCONFIG_NOSILENTUPDATE
--------------------------------------------------
If this variable has a non-blank value, it prevents silent kernel
-config udpates (requires explicit updates).
+config updates (requires explicit updates).

KCONFIG_AUTOCONFIG
--------------------------------------------------
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 75dc698..8e180a2 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -1342,7 +1342,7 @@ static void bus_reset_tasklet(unsigned long data)
* was set up before this reset, the old one is now no longer
* in use and we can free it. Update the config rom pointers
* to point to the current config rom and clear the
- * next_config_rom pointer so a new udpate can take place.
+ * next_config_rom pointer so a new update can take place.
*/

if (ohci->next_config_rom != NULL) {
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 37d12e5..1d7aea1 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -1474,7 +1474,7 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
/**
* ipath_pe_put_tid - write a TID in chip
* @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
* @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
* @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
*
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index fbf8c53..4b4a30b 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -1328,7 +1328,7 @@ bail:
/**
* ipath_pe_put_tid - write a TID in chip
* @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
* @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
* @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
*
@@ -1394,7 +1394,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
/**
* ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher
* @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
* @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
* @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
*
diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
index a805402..34b778e 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -1738,7 +1738,7 @@ bail:
/**
* ipath_7220_put_tid - write a TID to the chip
* @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
* @tidtype: 0 for eager, 1 for expected
* @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
*
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index ab98e13..7ea0d07 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -309,7 +309,7 @@ wait_busy(hfc4s8s_hw * a)

/******************************************************/
/* function to read critical counter registers that */
-/* may be udpated by the chip during read */
+/* may be updated by the chip during read */
/******************************************************/
static u_char
Read_hfc8_stable(hfc4s8s_hw * hw, int reg)
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index b1757ac..54bbf41 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -2364,7 +2364,7 @@ void rtl8180_wmm_param_update(struct work_struct * work)
u8 u1bAIFS;
u32 u4bAcParam;
pAcParam = (PAC_PARAM)(&AcParam);
- // Retrive paramters to udpate.
+ // Retrive paramters to update.
u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN *(((mode&IEEE_G) == IEEE_G)?9:20) + aSifsTime;
u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit))<<AC_PARAM_TXOP_LIMIT_OFFSET)|
(((u32)(pAcParam->f.Ecw.f.ECWmax))<<AC_PARAM_ECW_MAX_OFFSET)|
@@ -2400,7 +2400,7 @@ void rtl8180_wmm_param_update(struct work_struct * work)
u8 u1bAIFS;
u32 u4bAcParam;

- // Retrive paramters to udpate.
+ // Retrive paramters to update.
eACI = pAcParam->f.AciAifsn.f.ACI;
//Mode G/A: slotTimeTimer = 9; Mode B: 20
u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G)?9:20) + aSifsTime;
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index fc49078..462f46a 100644
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -35,7 +35,7 @@ bool CheckHighPower(struct net_device *dev)
// See also DoRxHighPower() and SetTxPowerLevel8185() for reference.
//
// Note:
-// The reason why we udpate Tx power level here instead of DoRxHighPower()
+// The reason why we update Tx power level here instead of DoRxHighPower()
// is the number of IO to change Tx power is much more than channel TR switch
// and they are related to OFDM and MAC registers.
// So, we don't want to update it so frequently in per-Rx packet base.
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index a0ece1f..519383e 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -1128,7 +1128,7 @@ ActUpdateChannelAccessSetting(
u8 u1bAIFS;
u32 u4bAcParam;

- // Retrive paramters to udpate.
+ // Retrive paramters to update.
eACI = pAcParam->f.AciAifsn.f.ACI;
u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime;
u4bAcParam = ( (((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET) |
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index d9b031c..d13b930 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -2437,7 +2437,7 @@ dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc, int level)

/* check if this is a control page update for an allocation.
* if so, update the leaf to reflect the new leaf value using
- * dbSplit(); otherwise (deallocation), use dbJoin() to udpate
+ * dbSplit(); otherwise (deallocation), use dbJoin() to update
* the leaf with the new value. in addition to updating the
* leaf, dbSplit() will also split the binary buddy system of
* the leaves, if required, and bubble new values within the
--
1.6.4.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/