[announce] atang tree has been rebased on top of 2.6.33

From: Bartlomiej Zolnierkiewicz
Date: Mon Apr 05 2010 - 07:16:37 EST

Next message: Hans-Peter Jansen: "Re: 2.6.34-rc3: simple du (on a big xfs tree) triggers oom killer"
Previous message: Uwe Kleine-König: "Re: Memory corruption with 2.6.32.10, but not with 2.6.34-rc3"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Changes:
- whole tree has been re-based on top of 2.6.33 kernel
- individual patches adding 32-bit PIO support to PATA drivers
have been combined together
- duplicated ata_timing_* EXPORT_SYMBOLs have been removed

( As a net result the total number of patches kept in atang tree
has decreased from 261 to 224. )

The standalone patch for vanilla 2.6.33 is now also available at:

http://www.kernel.org/pub/linux/kernel/people/bart/atang/patch-2.6.33-atang1.bz2

atang tree highlights:

* Support for more ATA controllers (SIL3x12 SATA on IXP425 platform,
Cirrus Logic's EP93xx PATA, Altera CompactFlash PATA and Samsung
S3C PATA)

* Enhanced SSD detection so block layer optimizations can be applied
to many more SSD devices

* Fix to make SATA Asynchronous Notification work on distributions
using HAL (-> almost all current distributions)

* Fix for Promise PATA UDMA problems

* ide2libata framework

* Various bug fixes, cleanups & other improvements for both libata/ide
subsystems (please see the ChangeLog below for details)

The following changes since commit 60b341b778cc2929df16c0a504c91621b3c6a4ad:
Linus Torvalds (1):
Linux 2.6.33

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/bart/misc.git atang-v5.0

Bartlomiej Zolnierkiewicz (203):
ata_piix: unify code for programming PIO and MWDMA timings
libata: make ata_sff_data_xfer_noirq() work with 32-bit PIO
libata: add 32-bit PIO support to PATA drivers (part 1)
libata: add 32-bit PIO support to PATA drivers (part 2)
pata_sch: add 32-bit PIO support
pata_artop: fix chipsets naming
pata_artop: add Power Management support
pata_artop: unify ->prereset methods
pata_artop: remove dead 34MHz PCI clock support
pata_atiixp: no need to program PIO timings for MWDMA
pata_atiixp: add MWDMA0 support
pata_atiixp: remove custom BMDMA methods
pata_atiixp: add proper ->prereset method
pata_efar: fix register naming used in efar_set_piomode()
pata_efar: unify code for programming PIO and MWDMA timings
pata_cmd64x: add enablebits checking
pata_cmd64x: add cmd64x_fixup()
pata_cs5535: no need to program PIO0 timings during device init
pata_hpt366: add enablebits checking
pata_hpt366: add hpt36x_find_mode() helper
pata_hpt3x2n: add enablebits checking
pata_it8213: add UDMA100 and UDMA133 support
pata_it8213: fix register naming used in it8213_set_piomode()
pata_it8213: unify code for programming PIO and MWDMA timings
pata_legacy: do not probe extra ports automatically if PCI is not present
pata_legacy: unify QDI ->set_piomode methods
pata_legacy: use PIO mask defines
libata: remove no longer needed pata_qdi driver
libata: remove no longer needed pata_winbond driver
pata_oldpiix: unify code for programming PIO and MWDMA timings
pata_pdc2027x: add Power Management support
pata_pdc202xx_old: Power Management fix
pata_radisys: unify code for programming PIO and MWDMA timings
pata_rdc: unify code for programming PIO and MWDMA timings
pata_scc: add proper cable detection method
pata_serverworks: use standard cable detection methods
pata_serverworks: add serverworks_fixup()
pata_sl82c105: add Power Management support
pata_via: add via_fixup()
libata: add ata_mwdma_to_pio() inline helper
libata: add ->init_host method
pata_cmd640: document known issues
pata_cypress: document known issues
pata_pdc202xx_old: document known issues
icside: bring back ->maskproc method
scc_pata: fix module unloading
add PATA host controller support for Cirrus Logic's EP93xx CPUs (v2)
libata: fix CFA handling in ide_timing_compute()
pata_ali: documentation fixes
pata_ali: cleanup ali_set_piomode()
pata_amd: remove bogus code from timing_setup()
pata_atiixp: remove superfluous wrapper function
pata_atiixp: add locking for parallel scanning
pata_atiixp: enable parallel scan
pata_cmd64x: fix PIO setup
pata_cmd64x: fix handling of address setup timings
pata_cmd64x: cmd648_bmdma_stop() fix
pata_cmd64x: remove unused definitions
pata_cs5520: convert to use ->init_host method
pata_cs5535: use correct values for PIO1 and PIO2 data timings
pata_cypress: fix PIO timings underclocking
pata_efar: always program master_data before slave_data
pata_efar: fix secondary port support
pata_efar: add locking for parallel scanning
pata_efar: enable parallel scan
pata_serverworks: fix PIO setup for the second channel
pata_serverworks: fix error message
pata_serverworks: cleanup cable detection
pata_via: fix address setup timings underlocking
pata_via: store UDMA masks in via_isa_bridges table
ide: fix for ide_timing quantisation errors
ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
alim15x3: fix PIO timings calculations
alim15x3: add ali_fifo_control() helper
alim15x3: remove superfluous locking from ali_set_pio_mode()
alim15x3: cleanup ali_cable_detect()
amd74xx: don't change UDMA settings when programming PIO timings
cmd64x: fix PIO and MWDMA timings calculations
cmd64x: remove superfluous checks from cmd64x_set_dma_mode()
cy82c693: fix PIO timings calculations
cy82c693: remove stale driver history
opti621: remove stale driver history
pdc202xx_old: add ->init_hwif method
serverworks: cleanup svwks_udma_filter()
serverworks: add missing pci_dev_put() call
via82cxxx: vx855 is a single channel controller
ide: add SATA cable detection support
via82cxxx: fix SATA cable detection
via82cxxx: workaround h/w bugs
via82cxxx: add support for vt8261 and future chips
via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller
via82cxxx: fix UDMA settings programming
ide: add drive->pio_mode field
ide: add drive->dma_mode field
ide: change ->set_pio_mode method parameters
ide: change ->set_dma_mode method parameters
ide-timings: use ->pio_mode value to determine fastest PIO speed
alim15x3: fix handling of address setup timings
alim15x3: fix handling of command timings
alim15x3: fix handling of DMA timings
alim15x3: fix handling of UDMA enable bit
amd74xx: use ->pio_mode value to determine pair device speed
cmd64x: fix handling of address setup timings
cs5535: use ->pio_mode value to determine pair device speed
cs5536: use ->pio_mode value to determine pair device speed
it821x: use ->pio_mode value to determine pair device speed
palm_bk3710: use ->pio_mode value to determine pair device speed
siimage: use ->pio_mode value to determine pair device speed
tx493xide: use ->pio_mode value to determine pair device speed
via82cxxx: use ->pio_mode value to determine pair device speed
ide: make ide_get_best_pio_mode() static
libata: ata_timing_compute() fixup
ide: ide_timing_compute() fixup
piix: add new short cable IDs
libata: CodingStyle fixes for ATA timings code
libata: move ATA timings code to ata-timings.c
ata: make ATA timings code independent of libata
ata: enable XFER_PIO_SLOW mode in ata_timing table
ide: switch to generic ATA timings code
pata_pcmcia: move IDs table to pata_pcmcia.h
ide-cs: use pata_pcmcia.h
ata_piix: factor out short cable detection code to ich_short_ata40()
ata_piix: move short cable handling to ata_piix.h
piix: use ata_piix.h
pata_ali: move short cable handling to pata_ali.h
alim15x3: use pata_ali.h
pata_sis: move short cable handling to pata_sis.h
sis5513: use pata_sis.h
pata_via: move short cable handling to pata_via.h
via82cxxx: use pata_via.h
ide: split host->dev table
ide: add hwif->port_no field
ide: add hwif->udma_mask field
ide: add hwif->private_data field
ide: add drive->devno field
ide: add drive->class field
ide: change ->cable_detect method return type to 'int'
it8213: always program control bits
piix: always program control bits
slc90e66: always program control bits
add ide2libata header file
ata_piix: move code to be re-used by ide2libata to ata_piix.h
piix: convert to ide2libata
pata_ali: move code to be re-used by ide2libata to pata_ali.h
alim15x3: convert to ide2libata
pata_amd: move code to be re-used by ide2libata to pata_amd.h
amd74xx: convert to ide2libata
pata_artop: move code to be re-used by ide2libata to pata_artop.h
aec62xx: convert to ide2libata
pata_atiixp: move code to be re-used by ide2libata to pata_atiixp.h
atiixp: convert to ide2libata
pata_cmd64x: documentation fix
pata_cmd64x: move code to be re-used by ide2libata to pata_cmd64x.h
pata_cmd64x: convert to ide2libata
pata_cs5520: move code to be re-used by ide2libata to pata_cs5520.h
cs5520: convert to ide2libata
pata_cs5530: move code to be re-used by ide2libata to pata_cs5530.h
cs5530: convert to ide2libata
pata_cs5535: move code to be re-used by ide2libata to pata_cs5535.h
cs5535: convert to ide2libata
pata_cypress: move code to be re-used by ide2libata to pata_cypress.h
cy82c693: convert to ide2libata
pata_efar: move code to be re-used by ide2libata to pata_efar.h
slc90e66: convert to ide2libata
pata_it8213: move code to be re-used by ide2libata to pata_it8213.h
it8213: convert to ide2libata
pata_it821x: move code to be re-used by ide2libata to pata_it821x.h
it821x: convert to ide2libata
pata_pdc202xx_old: move code to be re-used by ide2libata to pata_pdc202xx_old.h
pdc202xx_old: convert to ide2libata
pata_sc1200: move code to be re-used by ide2libata to pata_sc1200.h
sc1200: convert to ide2libata
pata_serverworks: move cable handling to pata_serverworks.h
serverworks: convert to ide2libata
pata_sl82c105: move code to be re-used by ide2libata to pata_sl82c105.h
sl82c105: convert to ide2libata
pata_triflex: move code to be re-used by ide2libata to pata_triflex.h
triflex: convert to ide2libata
pata_via: factor out code for finding ISA bridge
pata_via: move code to be re-used by ide2libata to pata_via.h
via82cxxx: convert to ide2libata
pata_cs5536: forward port changes from cs5536
pata_sil680: CodingStyle fixes
siimage: cleanup I/O helpers
piix: move documentation to ata_piix.h
ide2libata: add missing credits
pata_cs5536: move code to be re-used by ide2libata to pata_cs5536.h
cs5536: convert to ide2libata
pata_sil680: move code to be re-used by ide2libata to pata_sil680.h
siimage: convert to ide2libata
pata_opti: move code to be re-used by ide2libata to pata_opti.h
opti621: convert to ide2libata
ide: remove obsolete /proc/ide/hdx/ settings
ide: remove obsolete /proc/ide/ interface
move host drivers for VLB IDE controllers to staging/out
ide: remove hwif_chipset_t type
pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards
pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets
pata_pdc202xx_old: update documentation
libata: pass host flags into __ata_pci_sff_init_one() helper
pata_oldpiix: add locking for parallel scanning
pata_oldpiix: enable parallel scan
libata: enhanced SSD detection

H Hartley Sweeten (1):
arm/ep93xx: platform support for EP93xx IDE

Krzysztof Halasa (1):
sata_sil: IXP425 workaround

Mikulas Patocka (1):
via82cxxx: don't use UDMA on VIA UDMA33 controller with Transcend SSD

Robert Hancock (1):
scsi: properly export media change notification capability in block device flags

Russell King (1):
Fix Promise UDMA33 IDE driver (pdc202xx_old)

Sergei Shtylyov (6):
hpt366: add debounce delay to cable_detect() method
pata_hpt3x2n: always stretch UltraDMA timing
pata_hpt{37x|3x2n}: unify mode programming
pata_hpt366: remove redundant code
pata_hpt{37x|3x2n}: improve timing register documentation
pata_hpt366: remove irrelevant TODO

Thomas Abraham (8):
S3C64XX: Add physical address definition for Compact Flash controller.
S3C64XX: Add MEM_SYS_CFG register definition.
S3C64XX: Add IDE controller register definitions.
S3C64XX: Add clock source definition for IDE controller.
S3C64XX: Add platform data and driver resources for IDE controller driver.
S3C6410: Add platform data for S3C IDE controller driver
S3C64XX: Include IDE device code in compilation.
drivers/staging: Add Samsung S3C IDE controller driver

Thomas Chou (1):
drivers/staging: New PATA driver for Altera CompactFlash.

Wolfram Sang (1):
ide/ide-cs: fix order of releasing resources

arch/arm/mach-ep93xx/core.c | 85 +++
arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 1 +
arch/arm/mach-ep93xx/include/mach/platform.h | 3 +
arch/arm/mach-s3c6400/include/mach/map.h | 4 +
arch/arm/mach-s3c6410/mach-smdk6410.c | 14 +-
arch/arm/plat-s3c/include/plat/devs.h | 1 +
arch/arm/plat-s3c/include/plat/ide.h | 36 +
arch/arm/plat-s3c/include/plat/regs-ide.h | 56 ++
arch/arm/plat-s3c64xx/Makefile | 1 +
arch/arm/plat-s3c64xx/clock.c | 6 +
arch/arm/plat-s3c64xx/dev-ide.c | 88 +++
arch/arm/plat-s3c64xx/include/plat/regs-clock.h | 3 +
drivers/ata/Kconfig | 32 +-
drivers/ata/Makefile | 5 +-
drivers/ata/ata-timings.c | 178 +++++
drivers/ata/ata_piix.c | 353 +----------
drivers/ata/ata_piix.h | 324 +++++++++
drivers/ata/libata-core.c | 177 +-----
drivers/ata/libata-scsi.c | 18 +-
drivers/ata/libata-sff.c | 14 +-
drivers/ata/pata_ali.c | 294 +--------
drivers/ata/pata_ali.h | 326 +++++++++
drivers/ata/pata_amd.c | 139 +----
drivers/ata/pata_amd.h | 94 +++
drivers/ata/pata_artop.c | 330 ++--------
drivers/ata/pata_artop.h | 293 ++++++++
drivers/ata/pata_at32.c | 8 +-
drivers/ata/pata_at91.c | 18 +-
drivers/ata/pata_atiixp.c | 200 +-----
drivers/ata/pata_atiixp.h | 116 ++++
drivers/ata/pata_atp867x.c | 5 +-
drivers/ata/pata_cmd640.c | 36 +-
drivers/ata/pata_cmd64x.c | 260 +-------
drivers/ata/pata_cmd64x.h | 246 +++++++
drivers/ata/pata_cs5520.c | 115 +---
drivers/ata/pata_cs5520.h | 60 ++
drivers/ata/pata_cs5530.c | 205 +------
drivers/ata/pata_cs5530.h | 185 +++++
drivers/ata/pata_cs5535.c | 127 +----
drivers/ata/pata_cs5535.h | 114 ++++
drivers/ata/pata_cs5536.c | 191 +------
drivers/ata/pata_cs5536.h | 195 ++++++
drivers/ata/pata_cypress.c | 91 +---
drivers/ata/pata_cypress.h | 108 +++
drivers/ata/pata_efar.c | 179 +-----
drivers/ata/pata_efar.h | 161 +++++
drivers/ata/pata_ep93xx.c | 776 +++++++++++++++++++++
drivers/ata/pata_hpt366.c | 120 ++--
drivers/ata/pata_hpt37x.c | 172 +++---
drivers/ata/pata_hpt3x2n.c | 129 ++--
drivers/ata/pata_hpt3x3.c | 32 +-
drivers/ata/pata_icside.c | 4 +-
drivers/ata/pata_it8213.c | 189 +-----
drivers/ata/pata_it8213.h | 157 +++++
drivers/ata/pata_it821x.c | 354 +----------
drivers/ata/pata_it821x.h | 337 ++++++++++
drivers/ata/pata_jmicron.c | 2 +-
drivers/ata/pata_legacy.c | 176 ++---
drivers/ata/pata_ninja32.c | 30 +-
drivers/ata/pata_ns87410.c | 7 +-
drivers/ata/pata_ns87415.c | 34 +-
drivers/ata/pata_octeon_cf.c | 4 +-
drivers/ata/pata_oldpiix.c | 106 +--
drivers/ata/pata_opti.c | 92 +---
drivers/ata/pata_opti.h | 141 ++++
drivers/ata/pata_pcmcia.c | 67 +--
drivers/ata/pata_pcmcia.h | 66 ++
drivers/ata/pata_pdc2027x.c | 24 +-
drivers/ata/pata_pdc202xx_old.c | 153 ++---
drivers/ata/pata_pdc202xx_old.h | 121 ++++
drivers/ata/pata_qdi.c | 366 ----------
drivers/ata/pata_radisys.c | 74 +--
drivers/ata/pata_rdc.c | 106 +--
drivers/ata/pata_rz1000.c | 2 +
drivers/ata/pata_sc1200.c | 110 +---
drivers/ata/pata_sc1200.h | 112 +++
drivers/ata/pata_scc.c | 14 +-
drivers/ata/pata_sch.c | 2 +-
drivers/ata/pata_serverworks.c | 336 +---------
drivers/ata/pata_serverworks.h | 303 +++++++++
drivers/ata/pata_sil680.c | 228 +-------
drivers/ata/pata_sil680.h | 284 ++++++++
drivers/ata/pata_sis.c | 34 +-
drivers/ata/pata_sis.h | 30 +
drivers/ata/pata_sl82c105.c | 112 +---
drivers/ata/pata_sl82c105.h | 110 +++
drivers/ata/pata_triflex.c | 74 +--
drivers/ata/pata_triflex.h | 69 ++
drivers/ata/pata_via.c | 334 +---------
drivers/ata/pata_via.h | 269 ++++++++
drivers/ata/pata_winbond.c | 282 --------
drivers/ata/sata_sil.c | 50 +-
drivers/ide/Kconfig | 84 +---
drivers/ide/Makefile | 15 -
drivers/ide/aec62xx.c | 175 +-----
drivers/ide/alim15x3.c | 286 +--------
drivers/ide/amd74xx.c | 92 +--
drivers/ide/at91_ide.c | 15 +-
drivers/ide/atiixp.c | 128 +----
drivers/ide/au1xxx-ide.c | 10 +-
drivers/ide/buddha.c | 1 -
drivers/ide/cmd640.c | 8 +-
drivers/ide/cmd64x.c | 228 +------
drivers/ide/cs5520.c | 50 +--
drivers/ide/cs5530.c | 152 +----
drivers/ide/cs5535.c | 145 +----
drivers/ide/cs5536.c | 187 +-----
drivers/ide/cy82c693.c | 236 +-------
drivers/ide/delkin_cb.c | 1 -
drivers/ide/falconide.c | 1 -
drivers/ide/gayle.c | 1 -
drivers/ide/hpt366.c | 29 +-
drivers/ide/icside.c | 69 ++-
drivers/ide/ide-cd.c | 54 --
drivers/ide/ide-cs.c | 92 +---
drivers/ide/ide-devsets.c | 6 +-
drivers/ide/ide-disk.c | 3 -
drivers/ide/ide-disk.h | 9 -
drivers/ide/ide-disk_proc.c | 174 -----
drivers/ide/ide-dma.c | 2 +-
drivers/ide/ide-floppy.c | 3 -
drivers/ide/ide-floppy.h | 9 -
drivers/ide/ide-floppy_proc.c | 45 --
drivers/ide/ide-gd.c | 18 -
drivers/ide/ide-generic.c | 1 -
drivers/ide/ide-h8300.c | 1 -
drivers/ide/ide-iops.c | 2 +-
drivers/ide/ide-pnp.c | 1 -
drivers/ide/ide-probe.c | 16 +-
drivers/ide/ide-proc.c | 789 ----------------------
drivers/ide/ide-tape.c | 98 ---
drivers/ide/ide-timings.c | 211 ------
drivers/ide/ide-xfer-mode.c | 43 +-
drivers/ide/ide.c | 8 +-
drivers/ide/ide_platform.c | 1 -
drivers/ide/it8172.c | 14 +-
drivers/ide/it8213.c | 144 +----
drivers/ide/it821x.c | 377 +----------
drivers/ide/jmicron.c | 8 +-
drivers/ide/macide.c | 1 -
drivers/ide/opti621.c | 185 +-----
drivers/ide/palm_bk3710.c | 22 +-
drivers/ide/pdc202xx_new.c | 12 +-
drivers/ide/pdc202xx_old.c | 101 +---
drivers/ide/piix.c | 266 +-------
drivers/ide/pmac.c | 18 +-
drivers/ide/q40ide.c | 1 -
drivers/ide/rapide.c | 1 -
drivers/ide/sc1200.c | 121 +----
drivers/ide/scc_pata.c | 27 +-
drivers/ide/serverworks.c | 311 +--------
drivers/ide/setup-pci.c | 6 +-
drivers/ide/sgiioc4.c | 3 +-
drivers/ide/siimage.c | 342 +---------
drivers/ide/sis5513.c | 35 +-
drivers/ide/sl82c105.c | 113 +---
drivers/ide/slc90e66.c | 119 +---
drivers/ide/tc86c001.c | 11 +-
drivers/ide/triflex.c | 61 +--
drivers/ide/tx4938ide.c | 10 +-
drivers/ide/tx4939ide.c | 13 +-
drivers/ide/via82cxxx.c | 349 +++-------
drivers/scsi/sd.c | 2 +
drivers/scsi/sr.c | 2 +
drivers/staging/Kconfig | 6 +
drivers/staging/Makefile | 3 +
drivers/staging/ide-vlb/Kconfig | 69 ++
drivers/staging/ide-vlb/Makefile | 7 +
drivers/staging/ide-vlb/TODO | 5 +
drivers/{ide => staging/ide-vlb}/ali14xx.c | 6 +-
drivers/{ide => staging/ide-vlb}/dtc2278.c | 5 +-
drivers/{ide => staging/ide-vlb}/ht6560b.c | 23 +-
drivers/{ide => staging/ide-vlb}/ide-4drives.c | 1 -
drivers/{ide => staging/ide-vlb}/qd65xx.c | 15 +-
drivers/{ide => staging/ide-vlb}/qd65xx.h | 0
drivers/{ide => staging/ide-vlb}/umc8672.c | 6 +-
drivers/staging/pata_altera_cf/Kconfig | 11 +
drivers/staging/pata_altera_cf/Makefile | 1 +
drivers/staging/pata_altera_cf/TODO | 5 +
drivers/staging/pata_altera_cf/pata_altera_cf.c | 582 ++++++++++++++++
drivers/staging/s3c-ide/Kconfig | 8 +
drivers/staging/s3c-ide/Makefile | 1 +
drivers/staging/s3c-ide/TODO | 6 +
drivers/staging/s3c-ide/s3c-ide.c | 822 +++++++++++++++++++++++
include/linux/ata.h | 54 ++
include/linux/ide.h | 163 +----
include/linux/ide2libata.h | 17 +
include/linux/libata.h | 52 +--
188 files changed, 8584 insertions(+), 11547 deletions(-)
create mode 100644 arch/arm/plat-s3c/include/plat/ide.h
create mode 100644 arch/arm/plat-s3c/include/plat/regs-ide.h
create mode 100644 arch/arm/plat-s3c64xx/dev-ide.c
create mode 100644 drivers/ata/ata-timings.c
create mode 100644 drivers/ata/ata_piix.h
create mode 100644 drivers/ata/pata_ali.h
create mode 100644 drivers/ata/pata_amd.h
create mode 100644 drivers/ata/pata_artop.h
create mode 100644 drivers/ata/pata_atiixp.h
create mode 100644 drivers/ata/pata_cmd64x.h
create mode 100644 drivers/ata/pata_cs5520.h
create mode 100644 drivers/ata/pata_cs5530.h
create mode 100644 drivers/ata/pata_cs5535.h
create mode 100644 drivers/ata/pata_cs5536.h
create mode 100644 drivers/ata/pata_cypress.h
create mode 100644 drivers/ata/pata_efar.h
create mode 100644 drivers/ata/pata_ep93xx.c
create mode 100644 drivers/ata/pata_it8213.h
create mode 100644 drivers/ata/pata_it821x.h
create mode 100644 drivers/ata/pata_opti.h
create mode 100644 drivers/ata/pata_pcmcia.h
create mode 100644 drivers/ata/pata_pdc202xx_old.h
delete mode 100644 drivers/ata/pata_qdi.c
create mode 100644 drivers/ata/pata_sc1200.h
create mode 100644 drivers/ata/pata_serverworks.h
create mode 100644 drivers/ata/pata_sil680.h
create mode 100644 drivers/ata/pata_sis.h
create mode 100644 drivers/ata/pata_sl82c105.h
create mode 100644 drivers/ata/pata_triflex.h
create mode 100644 drivers/ata/pata_via.h
delete mode 100644 drivers/ata/pata_winbond.c
delete mode 100644 drivers/ide/ide-disk_proc.c
delete mode 100644 drivers/ide/ide-floppy_proc.c
delete mode 100644 drivers/ide/ide-proc.c
delete mode 100644 drivers/ide/ide-timings.c
create mode 100644 drivers/staging/ide-vlb/Kconfig
create mode 100644 drivers/staging/ide-vlb/Makefile
create mode 100644 drivers/staging/ide-vlb/TODO
rename drivers/{ide => staging/ide-vlb}/ali14xx.c (97%)
rename drivers/{ide => staging/ide-vlb}/dtc2278.c (97%)
rename drivers/{ide => staging/ide-vlb}/ht6560b.c (98%)
rename drivers/{ide => staging/ide-vlb}/ide-4drives.c (98%)
rename drivers/{ide => staging/ide-vlb}/qd65xx.c (96%)
rename drivers/{ide => staging/ide-vlb}/qd65xx.h (100%)
rename drivers/{ide => staging/ide-vlb}/umc8672.c (97%)
create mode 100644 drivers/staging/pata_altera_cf/Kconfig
create mode 100644 drivers/staging/pata_altera_cf/Makefile
create mode 100644 drivers/staging/pata_altera_cf/TODO
create mode 100644 drivers/staging/pata_altera_cf/pata_altera_cf.c
create mode 100644 drivers/staging/s3c-ide/Kconfig
create mode 100644 drivers/staging/s3c-ide/Makefile
create mode 100644 drivers/staging/s3c-ide/TODO
create mode 100644 drivers/staging/s3c-ide/s3c-ide.c
create mode 100644 include/linux/ide2libata.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Hans-Peter Jansen: "Re: 2.6.34-rc3: simple du (on a big xfs tree) triggers oom killer"
Previous message: Uwe Kleine-König: "Re: Memory corruption with 2.6.32.10, but not with 2.6.34-rc3"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]