Re: [PATCH 3/3] blkio: Add more debug-only per-cgroup stats
From: Divyesh Shah
Date: Fri Apr 09 2010 - 20:09:36 EST
On Fri, Apr 9, 2010 at 12:21 PM, Vivek Goyal <vgoyal@xxxxxxxxxx> wrote:
> On Thu, Apr 08, 2010 at 09:15:35PM -0700, Divyesh Shah wrote:
>> 1) group_wait_time - This is the amount of time the cgroup had to wait to get a
>> timeslice for one of its queues from when it became busy, i.e., went from 0
>> to 1 request queued. This is different from the io_wait_time which is the
>> cumulative total of the amount of time spent by each IO in that cgroup waiting
>> in the scheduler queue. This stat is a great way to find out any jobs in the
>> fleet that are being starved or waiting for longer than what is expected (due
>> to an IO controller bug or any other issue).
>> 2) empty_time - This is the amount of time a cgroup spends w/o any pending
>> requests. This stat is useful when a job does not seem to be able to use its
>> assigned disk share by helping check if that is happening due to an IO
>> controller bug or because the job is not submitting enough IOs.
>
> Divyesh,
>
> This empty_time looks like a redundant stats. One can just look at
> group_wait_time. If group_wait_time is not increasing, then application
> in cgroup is not doing any IO. If it is increasing then one can look
> at so many other stas like blkio.time, blkio.sectors etc to find out
> if cgroup is making any progress or not.
Vivek,
group_wait_time could not be increasing even when the cgroup
is dominating the disk by sending tons of IO all the time and you
can't conclude that the cgroup is not doing any IO. Even when it is
increasing, any of the other stats don't give what we are looking for
with this stat.. which is how busy is the application really able to
keep its IO queues over a given period of time. I do realize that
these 3 stats might not be of interest to all which is why I enable
them only in debug mode. I do think this stat adds value and is not
completely redundant.
>
> So IMHO, we really don't need anything like empty_time.
>
>
>> 3) idle_time - This is the amount of time spent by the IO scheduler idling
>> for a given cgroup in anticipation of a better request than the exising ones
>> from other queues/cgroups.
>>
>> All these stats are recorded using start and stop events. When reading these
>> stats, we do not add the delta between the current time and the last start time
>> if we're between the start and stop events. We avoid doing this to make sure
>> that these numbers are always monotonically increasing when read. Since we're
>> using sched_clock() which may use the tsc as its source, it may induce some
>> inconsistency (due to tsc resync across cpus) if we included the current delta.
>
> So what is that inconsistency? Time goes backwards? If yes, can't we just
> check that stop time is start time and only then any time sample is
> valid otherwise we ignore it?
Looks like I did a bad job in explaining the problem. We have
start-stop events and we do a good job at discarding any intervals
where time went backwards and hence stop_time is earlier than
start_time.
Say we are in the middle of the start and stop events and userspace
reads this value. We compute the delta between the start event and now
(and ignore if we see now before start event) and add that value to
the accumulated time and export to userspace. If the next read happens
right away and in between these 2 reads time goes backward (due to tsc
sync or any other issue) we will get a current delta which maybe
smaller than before and hence the stat that we export to userspace may
actually decrease in value. We want to avoid that and always export
monotonically increasing values to userspace (except when we
rollover... which takes a really long time).
If this does not clarify it, I can try again with an example too.
> Why same inconsistency in time (due to tsc resync) can't be introduced between start and stop event window?
The above explanation should have hopefully explained this too.
>
> In case of group_wait_time, there does not seem to be any stop event. It
> is just start and update event?
the stop event is when the the first queue from this group gets a
timeslice after the group became busy. We clear the blkg_waiting flag
on this event.
>
>>
>> Signed-off-by: Divyesh Shah<dpshah@xxxxxxxxxx>
>> ---
>>
>> Documentation/cgroups/blkio-controller.txt | 29 +++++
>> block/blk-cgroup.c | 159 +++++++++++++++++++++++++++-
>> block/blk-cgroup.h | 54 ++++++++++
>> block/cfq-iosched.c | 50 ++++++---
>> 4 files changed, 271 insertions(+), 21 deletions(-)
>>
>> diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt
>> index 6e52e7c..db054ea 100644
>> --- a/Documentation/cgroups/blkio-controller.txt
>> +++ b/Documentation/cgroups/blkio-controller.txt
>> @@ -150,6 +150,35 @@ Details of cgroup files
>> cgroup's existence. Queue size samples are taken each time one of the
>> queues of this cgroup gets a timeslice.
>>
>> +- blkio.group_wait_time
>> + - Debugging aid only enabled if CONFIG_DEBUG_CFQ_IOSCHED=y.
>> + This is the amount of time the cgroup had to wait since it became busy
>> + (i.e., went from 0 to 1 request queued) to get a timeslice for one of
>> + its queues. This is different from the io_wait_time which is the
>> + cumulative total of the amount of time spent by each IO in that cgroup
>> + waiting in the scheduler queue. This is in nanoseconds. If this is
>> + read when the cgroup is in a waiting (for timeslice) state, the stat
>> + will only report the group_wait_time accumulated till the last time it
>> + got a timeslice and will not include the current delta.
>> +
>> +- blkio.empty_time
>> + - Debugging aid only enabled if CONFIG_DEBUG_CFQ_IOSCHED=y.
>> + This is the amount of time a cgroup spends without any pending
>> + requests when not being served, i.e., it does not include any time
>> + spent idling for one of the queues of the cgroup. This is in
>> + nanoseconds. If this is read when the cgroup is in an empty state,
>> + the stat will only report the empty_time accumulated till the last
>> + time it had a pending request and will not include the current delta.
>> +
>> +- blkio.idle_time
>> + - Debugging aid only enabled if CONFIG_DEBUG_CFQ_IOSCHED=y.
>> + This is the amount of time spent by the IO scheduler idling for a
>> + given cgroup in anticipation of a better request than the exising ones
>> + from other queues/cgroups. This is in nanoseconds. If this is read
>> + when the cgroup is in an idling state, the stat will only report the
>> + idle_time accumulated till the last idle period and will not include
>> + the current delta.
>> +
>> - blkio.dequeue
>> - Debugging aid only enabled if CONFIG_DEBUG_CFQ_IOSCHED=y. This
>> gives the statistics about how many a times a group was dequeued
>> diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
>> index 1e0c497..1ecff7a 100644
>> --- a/block/blk-cgroup.c
>> +++ b/block/blk-cgroup.c
>> @@ -105,6 +105,76 @@ static void blkio_check_and_dec_stat(uint64_t *stat, bool direction, bool sync)
>> }
>>
>> #ifdef CONFIG_DEBUG_BLK_CGROUP
>> +/* This should be called with the blkg->stats_lock held. */
>> +static void blkio_set_start_group_wait_time(struct blkio_group *blkg,
>> + struct blkio_group *curr_blkg)
>> +{
>> + if (blkio_blkg_waiting(&blkg->stats))
>> + return;
>> + if (blkg == curr_blkg)
>> + return;
>> + blkg->stats.start_group_wait_time = sched_clock();
>> + blkio_mark_blkg_waiting(&blkg->stats);
>
> I am hoping that you have a good reason to maintain all these stats in ns
> and not in us.
Is trying to be consistent (w/ the exception of blkio.time) good enough? ;)
It would suck to have all stats export time in different units.
>
> My rough calculation says that it will take 584 years to overflow this
> :-). So probably ns is not bad.
Yep.. ns is not that bad
>
> 2^64/10^9 = 18446744073 sec
> 18446744073/60 = 307445734 mins
> 307445734/60 = 5124095 hrs
> 5124095/24= 213503 days
> 213503/365= 584 years
>
> Hopefully this calculation is right.
>
>> +}
>> +
>> +/* This should be called with the blkg->stats_lock held. */
>> +static void blkio_update_group_wait_time(struct blkio_group_stats *stats)
>> +{
>> + unsigned long long now;
>> +
>> + if (!blkio_blkg_waiting(stats))
>> + return;
>> +
>> + now = sched_clock();
>> + if (time_after64(now, stats->start_group_wait_time))
>> + stats->group_wait_time += now - stats->start_group_wait_time;
>> + blkio_clear_blkg_waiting(stats);
>> +}
>> +
>> +/* This should be called with the blkg->stats_lock held. */
>> +static void blkio_end_empty_time(struct blkio_group_stats *stats)
>> +{
>> + unsigned long long now;
>> +
>> + if (!blkio_blkg_empty(stats))
>> + return;
>> +
>> + now = sched_clock();
>> + if (time_after64(now, stats->start_empty_time))
>> + stats->empty_time += now - stats->start_empty_time;
>> + blkio_clear_blkg_empty(stats);
>> +}
>> +
>> +void blkiocg_update_set_idle_time_stats(struct blkio_group *blkg)
>> +{
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&blkg->stats_lock, flags);
>> + BUG_ON(blkio_blkg_idling(&blkg->stats));
>> + blkg->stats.start_idle_time = sched_clock();
>> + blkio_mark_blkg_idling(&blkg->stats);
>> + spin_unlock_irqrestore(&blkg->stats_lock, flags);
>> +}
>> +EXPORT_SYMBOL_GPL(blkiocg_update_set_idle_time_stats);
>> +
>> +void blkiocg_update_idle_time_stats(struct blkio_group *blkg)
>> +{
>> + unsigned long flags;
>> + unsigned long long now;
>> + struct blkio_group_stats *stats;
>> +
>> + spin_lock_irqsave(&blkg->stats_lock, flags);
>> + stats = &blkg->stats;
>> + if (blkio_blkg_idling(stats)) {
>> + now = sched_clock();
>> + if (time_after64(now, stats->start_idle_time))
>> + stats->idle_time += now - stats->start_idle_time;
>> + blkio_clear_blkg_idling(stats);
>> + }
>> + spin_unlock_irqrestore(&blkg->stats_lock, flags);
>> +}
>> +EXPORT_SYMBOL_GPL(blkiocg_update_idle_time_stats);
>> +
>> void blkiocg_update_set_active_queue_stats(struct blkio_group *blkg)
>> {
>> unsigned long flags;
>> @@ -116,9 +186,14 @@ void blkiocg_update_set_active_queue_stats(struct blkio_group *blkg)
>> stats->stat_arr[BLKIO_STAT_QUEUED][BLKIO_STAT_READ] +
>> stats->stat_arr[BLKIO_STAT_QUEUED][BLKIO_STAT_WRITE];
>> stats->avg_queue_size_samples++;
>> + blkio_update_group_wait_time(stats);
>
> Will cfq_choose_cfqg() be a better place to call this function. Why should
> we call it when an active queue is set. Instead when a group is chosen
> to dispatch request from, we can update the wait time.
Does that cover pre-emption cases too?
> That way the number of times this function is called will reduce as we
> can dispatch multiple cfqqs from single group.
>
>> spin_unlock_irqrestore(&blkg->stats_lock, flags);
>> }
>> EXPORT_SYMBOL_GPL(blkiocg_update_set_active_queue_stats);
>> +#else
>> +static inline void blkio_set_start_group_wait_time(struct blkio_group *blkg,
>> + struct blkio_group *curr_blkg) {}
>> +static inline void blkio_end_empty_time(struct blkio_group_stats *stats) {}
>> #endif
>>
>> void blkiocg_update_request_add_stats(struct blkio_group *blkg,
>> @@ -130,6 +205,8 @@ void blkiocg_update_request_add_stats(struct blkio_group *blkg,
>> spin_lock_irqsave(&blkg->stats_lock, flags);
>> blkio_add_stat(blkg->stats.stat_arr[BLKIO_STAT_QUEUED], 1, direction,
>> sync);
>> + blkio_end_empty_time(&blkg->stats);
>> + blkio_set_start_group_wait_time(blkg, curr_blkg);
>> spin_unlock_irqrestore(&blkg->stats_lock, flags);
>> }
>> EXPORT_SYMBOL_GPL(blkiocg_update_request_add_stats);
>> @@ -156,6 +233,33 @@ void blkiocg_update_timeslice_used(struct blkio_group *blkg, unsigned long time)
>> }
>> EXPORT_SYMBOL_GPL(blkiocg_update_timeslice_used);
>>
>> +void blkiocg_set_start_empty_time(struct blkio_group *blkg, bool ignore)
>> +{
>> + unsigned long flags;
>> + struct blkio_group_stats *stats;
>> +
>> + spin_lock_irqsave(&blkg->stats_lock, flags);
>> + stats = &blkg->stats;
>> +
>> + if (stats->stat_arr[BLKIO_STAT_QUEUED][BLKIO_STAT_READ] ||
>> + stats->stat_arr[BLKIO_STAT_QUEUED][BLKIO_STAT_WRITE]) {
>> + spin_unlock_irqrestore(&blkg->stats_lock, flags);
>> + return;
>> + }
>> +
>> + /*
>> + * If ignore is set, we do not panic on the empty flag being set
>> + * already. This is to avoid cases where there are superfluous timeslice
>> + * complete events (for eg., forced_dispatch in CFQ) when no IOs are
>> + * served which could result in triggering the empty check incorrectly.
>> + */
>> + BUG_ON(!ignore && blkio_blkg_empty(stats));
>> + stats->start_empty_time = sched_clock();
>> + blkio_mark_blkg_empty(stats);
>> + spin_unlock_irqrestore(&blkg->stats_lock, flags);
>> +}
>> +EXPORT_SYMBOL_GPL(blkiocg_set_start_empty_time);
>> +
>> void blkiocg_update_dispatch_stats(struct blkio_group *blkg,
>> uint64_t bytes, bool direction, bool sync)
>> {
>> @@ -317,19 +421,44 @@ blkiocg_reset_stats(struct cgroup *cgroup, struct cftype *cftype, u64 val)
>> {
>> struct blkio_cgroup *blkcg;
>> struct blkio_group *blkg;
>> + struct blkio_group_stats *stats;
>> struct hlist_node *n;
>> uint64_t queued[BLKIO_STAT_TOTAL];
>> int i;
>> +#ifdef CONFIG_DEBUG_BLK_CGROUP
>> + bool idling, waiting, empty;
>> + unsigned long long now = sched_clock();
>> +#endif
>>
>> blkcg = cgroup_to_blkio_cgroup(cgroup);
>> spin_lock_irq(&blkcg->lock);
>> hlist_for_each_entry(blkg, n, &blkcg->blkg_list, blkcg_node) {
>> spin_lock(&blkg->stats_lock);
>> + stats = &blkg->stats;
>> +#ifdef CONFIG_DEBUG_BLK_CGROUP
>> + idling = blkio_blkg_idling(stats);
>> + waiting = blkio_blkg_waiting(stats);
>> + empty = blkio_blkg_empty(stats);
>> +#endif
>> for (i = 0; i < BLKIO_STAT_TOTAL; i++)
>> - queued[i] = blkg->stats.stat_arr[BLKIO_STAT_QUEUED][i];
>> - memset(&blkg->stats, 0, sizeof(struct blkio_group_stats));
>> + queued[i] = stats->stat_arr[BLKIO_STAT_QUEUED][i];
>> + memset(stats, 0, sizeof(struct blkio_group_stats));
>> for (i = 0; i < BLKIO_STAT_TOTAL; i++)
>> - blkg->stats.stat_arr[BLKIO_STAT_QUEUED][i] = queued[i];
>> + stats->stat_arr[BLKIO_STAT_QUEUED][i] = queued[i];
>> +#ifdef CONFIG_DEBUG_BLK_CGROUP
>> + if (idling) {
>> + blkio_mark_blkg_idling(stats);
>> + stats->start_idle_time = now;
>> + }
>> + if (waiting) {
>> + blkio_mark_blkg_waiting(stats);
>> + stats->start_group_wait_time = now;
>> + }
>> + if (empty) {
>> + blkio_mark_blkg_empty(stats);
>> + stats->start_empty_time = now;
>> + }
>> +#endif
>> spin_unlock(&blkg->stats_lock);
>> }
>> spin_unlock_irq(&blkcg->lock);
>> @@ -401,6 +530,15 @@ static uint64_t blkio_get_stat(struct blkio_group *blkg,
>> sum = 0;
>> return blkio_fill_stat(key_str, MAX_KEY_LEN - 1, sum, cb, dev);
>> }
>> + if (type == BLKIO_STAT_GROUP_WAIT_TIME)
>> + return blkio_fill_stat(key_str, MAX_KEY_LEN - 1,
>> + blkg->stats.group_wait_time, cb, dev);
>> + if (type == BLKIO_STAT_IDLE_TIME)
>> + return blkio_fill_stat(key_str, MAX_KEY_LEN - 1,
>> + blkg->stats.idle_time, cb, dev);
>> + if (type == BLKIO_STAT_EMPTY_TIME)
>> + return blkio_fill_stat(key_str, MAX_KEY_LEN - 1,
>> + blkg->stats.empty_time, cb, dev);
>> if (type == BLKIO_STAT_DEQUEUE)
>> return blkio_fill_stat(key_str, MAX_KEY_LEN - 1,
>> blkg->stats.dequeue, cb, dev);
>> @@ -458,6 +596,9 @@ SHOW_FUNCTION_PER_GROUP(io_queued, BLKIO_STAT_QUEUED, 1);
>> #ifdef CONFIG_DEBUG_BLK_CGROUP
>> SHOW_FUNCTION_PER_GROUP(dequeue, BLKIO_STAT_DEQUEUE, 0);
>> SHOW_FUNCTION_PER_GROUP(avg_queue_size, BLKIO_STAT_AVG_QUEUE_SIZE, 0);
>> +SHOW_FUNCTION_PER_GROUP(group_wait_time, BLKIO_STAT_GROUP_WAIT_TIME, 0);
>> +SHOW_FUNCTION_PER_GROUP(idle_time, BLKIO_STAT_IDLE_TIME, 0);
>> +SHOW_FUNCTION_PER_GROUP(empty_time, BLKIO_STAT_EMPTY_TIME, 0);
>> #endif
>> #undef SHOW_FUNCTION_PER_GROUP
>>
>> @@ -518,6 +659,18 @@ struct cftype blkio_files[] = {
>> .read_map = blkiocg_avg_queue_size_read,
>> },
>> {
>> + .name = "group_wait_time",
>> + .read_map = blkiocg_group_wait_time_read,
>> + },
>> + {
>> + .name = "idle_time",
>> + .read_map = blkiocg_idle_time_read,
>> + },
>> + {
>> + .name = "empty_time",
>> + .read_map = blkiocg_empty_time_read,
>> + },
>> + {
>> .name = "dequeue",
>> .read_map = blkiocg_dequeue_read,
>> },
>> diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h
>> index bea7f3b..bfce085 100644
>> --- a/block/blk-cgroup.h
>> +++ b/block/blk-cgroup.h
>> @@ -43,6 +43,9 @@ enum stat_type {
>> BLKIO_STAT_SECTORS,
>> #ifdef CONFIG_DEBUG_BLK_CGROUP
>> BLKIO_STAT_AVG_QUEUE_SIZE,
>> + BLKIO_STAT_IDLE_TIME,
>> + BLKIO_STAT_EMPTY_TIME,
>> + BLKIO_STAT_GROUP_WAIT_TIME,
>> BLKIO_STAT_DEQUEUE
>> #endif
>> };
>> @@ -55,6 +58,13 @@ enum stat_sub_type {
>> BLKIO_STAT_TOTAL
>> };
>>
>> +/* blkg state flags */
>> +enum blkg_state_flags {
>> + BLKG_waiting = 0,
>> + BLKG_idling,
>> + BLKG_empty,
>> +};
>> +
>> struct blkio_cgroup {
>> struct cgroup_subsys_state css;
>> unsigned int weight;
>> @@ -74,6 +84,21 @@ struct blkio_group_stats {
>> uint64_t avg_queue_size_samples;
>> /* How many times this group has been removed from service tree */
>> unsigned long dequeue;
>> +
>> + /* Total time spent waiting for it to be assigned a timeslice. */
>> + uint64_t group_wait_time;
>> + uint64_t start_group_wait_time;
>> +
>> + /* Time spent idling for this blkio_group */
>> + uint64_t idle_time;
>> + uint64_t start_idle_time;
>> + /*
>> + * Total time when we have requests queued and do not contain the
>> + * current active queue.
>> + */
>> + uint64_t empty_time;
>> + uint64_t start_empty_time;
>> + uint16_t flags;
>
> Does this flags has to be inside blkio_group_stats? May be a better
> place is inside blkio_group as it represents the blkio_group status.
> That's a differnet thing that as of today all three flags are helping out
> only for stats purposes but in future we could add more flags?
I agree with you in principle. Would it make sense to move this to
blkg when we have a use-case for it beyond stats?
>
>> #endif
>> };
>>
>> @@ -137,12 +162,41 @@ static inline char *blkg_path(struct blkio_group *blkg)
>> void blkiocg_update_set_active_queue_stats(struct blkio_group *blkg);
>> void blkiocg_update_dequeue_stats(struct blkio_group *blkg,
>> unsigned long dequeue);
>> +void blkiocg_update_set_idle_time_stats(struct blkio_group *blkg);
>> +void blkiocg_update_idle_time_stats(struct blkio_group *blkg);
>> +void blkiocg_set_start_empty_time(struct blkio_group *blkg, bool ignore);
>> +
>> +#define BLKG_FLAG_FNS(name) \
>> +static inline void blkio_mark_blkg_##name( \
>> + struct blkio_group_stats *stats) \
>> +{ \
>> + stats->flags |= (1 << BLKG_##name); \
>> +} \
>> +static inline void blkio_clear_blkg_##name( \
>> + struct blkio_group_stats *stats) \
>> +{ \
>> + stats->flags &= ~(1 << BLKG_##name); \
>> +} \
>> +static inline int blkio_blkg_##name(struct blkio_group_stats *stats) \
>> +{ \
>> + return (stats->flags & (1 << BLKG_##name)) != 0; \
>> +} \
>> +
>> +BLKG_FLAG_FNS(waiting)
>> +BLKG_FLAG_FNS(idling)
>> +BLKG_FLAG_FNS(empty)
>> +#undef BLKG_FLAG_FNS
>> #else
>> static inline char *blkg_path(struct blkio_group *blkg) { return NULL; }
>> static inline void blkiocg_update_set_active_queue_stats(
>> struct blkio_group *blkg) {}
>> static inline void blkiocg_update_dequeue_stats(struct blkio_group *blkg,
>> unsigned long dequeue) {}
>> +static inline void blkiocg_update_set_idle_time_stats(struct blkio_group *blkg)
>> +{}
>> +static inline void blkiocg_update_idle_time_stats(struct blkio_group *blkg) {}
>> +static inline void blkiocg_set_start_empty_time(struct blkio_group *blkg,
>> + bool ignore) {}
>> #endif
>>
>> #if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE)
>> diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
>> index 8e0b86a..b6e095c 100644
>> --- a/block/cfq-iosched.c
>> +++ b/block/cfq-iosched.c
>> @@ -886,7 +886,7 @@ static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
>> }
>>
>> static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
>> - struct cfq_queue *cfqq)
>> + struct cfq_queue *cfqq, bool forced)
>> {
>> struct cfq_rb_root *st = &cfqd->grp_service_tree;
>> unsigned int used_sl, charge_sl;
>> @@ -916,6 +916,7 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
>> cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
>> st->min_vdisktime);
>> blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
>> + blkiocg_set_start_empty_time(&cfqg->blkg, forced);
>
> Why this needs to be called from CFQ? Can't we just internally call this
> from blkiocg_update_request_remove_stats() internally. So when we remove
> a request, we update the stats in blkio. That time blkio can checek if
> group became empty and start the time?
>From Documentation/cgroups/blkio-controller.txt:
This is the amount of time a cgroup spends without any pending
requests when not being served, i.e., it does not include any time
spent idling for one of the queues of the cgroup.
Calling this from remove_stats will add the idle time in here too.
>
>> }
>>
>> #ifdef CONFIG_CFQ_GROUP_IOSCHED
>> @@ -1528,6 +1529,12 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq,
>> return cfqq == RQ_CFQQ(rq);
>> }
>>
>> +static inline void cfq_del_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
>> +{
>> + del_timer(&cfqd->idle_slice_timer);
>> + blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
>> +}
>> +
>> static void __cfq_set_active_queue(struct cfq_data *cfqd,
>> struct cfq_queue *cfqq)
>> {
>> @@ -1547,7 +1554,7 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd,
>> cfq_clear_cfqq_fifo_expire(cfqq);
>> cfq_mark_cfqq_slice_new(cfqq);
>>
>> - del_timer(&cfqd->idle_slice_timer);
>> + cfq_del_timer(cfqd, cfqq);
>> }
>>
>> cfqd->active_queue = cfqq;
>> @@ -1558,12 +1565,12 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd,
>> */
>> static void
>> __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
>> - bool timed_out)
>> + bool timed_out, bool forced)
>> {
>> cfq_log_cfqq(cfqd, cfqq, "slice expired t=%d", timed_out);
>>
>> if (cfq_cfqq_wait_request(cfqq))
>> - del_timer(&cfqd->idle_slice_timer);
>> + cfq_del_timer(cfqd, cfqq);
>>
>> cfq_clear_cfqq_wait_request(cfqq);
>> cfq_clear_cfqq_wait_busy(cfqq);
>> @@ -1585,7 +1592,7 @@ __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
>> cfq_log_cfqq(cfqd, cfqq, "resid=%ld", cfqq->slice_resid);
>> }
>>
>> - cfq_group_served(cfqd, cfqq->cfqg, cfqq);
>> + cfq_group_served(cfqd, cfqq->cfqg, cfqq, forced);
>>
>> if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY_ROOT(&cfqq->sort_list))
>> cfq_del_cfqq_rr(cfqd, cfqq);
>> @@ -1604,12 +1611,13 @@ __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
>> }
>> }
>>
>> -static inline void cfq_slice_expired(struct cfq_data *cfqd, bool timed_out)
>> +static inline void cfq_slice_expired(struct cfq_data *cfqd, bool timed_out,
>> + bool forced)
>> {
>> struct cfq_queue *cfqq = cfqd->active_queue;
>>
>> if (cfqq)
>> - __cfq_slice_expired(cfqd, cfqq, timed_out);
>> + __cfq_slice_expired(cfqd, cfqq, timed_out, forced);
>> }
>>
>> /*
>> @@ -1865,6 +1873,7 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
>> sl = cfqd->cfq_slice_idle;
>>
>> mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
>> + blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
>> cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
>> }
>>
>> @@ -2176,7 +2185,7 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
>> }
>>
>> expire:
>> - cfq_slice_expired(cfqd, 0);
>> + cfq_slice_expired(cfqd, 0, false);
>> new_queue:
>> /*
>> * Current queue expired. Check if we have to switch to a new
>> @@ -2202,7 +2211,7 @@ static int __cfq_forced_dispatch_cfqq(struct cfq_queue *cfqq)
>> BUG_ON(!list_empty(&cfqq->fifo));
>>
>> /* By default cfqq is not expired if it is empty. Do it explicitly */
>> - __cfq_slice_expired(cfqq->cfqd, cfqq, 0);
>> + __cfq_slice_expired(cfqq->cfqd, cfqq, 0, true);
>> return dispatched;
>> }
>>
>> @@ -2218,7 +2227,7 @@ static int cfq_forced_dispatch(struct cfq_data *cfqd)
>> while ((cfqq = cfq_get_next_queue_forced(cfqd)) != NULL)
>> dispatched += __cfq_forced_dispatch_cfqq(cfqq);
>>
>> - cfq_slice_expired(cfqd, 0);
>> + cfq_slice_expired(cfqd, 0, true);
>> BUG_ON(cfqd->busy_queues);
>>
>> cfq_log(cfqd, "forced_dispatch=%d", dispatched);
>> @@ -2382,10 +2391,15 @@ static int cfq_dispatch_requests(struct request_queue *q, int force)
>> cfqq->slice_dispatch >= cfq_prio_to_maxrq(cfqd, cfqq)) ||
>> cfq_class_idle(cfqq))) {
>> cfqq->slice_end = jiffies + 1;
>> - cfq_slice_expired(cfqd, 0);
>> + cfq_slice_expired(cfqd, 0, false);
>> }
>>
>> cfq_log_cfqq(cfqd, cfqq, "dispatched a request");
>> + /*
>> + * This is needed since we don't exactly match the mod_timer() and
>> + * del_timer() calls in CFQ.
>> + */
>> + blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
>
> Shouldn't we try to call cfq_del_timer() whereever appropriate, instead of
> directy trying to update idle_time_stats?
Done.
>
>> return 1;
>> }
>>
>> @@ -2413,7 +2427,7 @@ static void cfq_put_queue(struct cfq_queue *cfqq)
>> orig_cfqg = cfqq->orig_cfqg;
>>
>> if (unlikely(cfqd->active_queue == cfqq)) {
>> - __cfq_slice_expired(cfqd, cfqq, 0);
>> + __cfq_slice_expired(cfqd, cfqq, 0, false);
>> cfq_schedule_dispatch(cfqd);
>> }
>>
>> @@ -2514,7 +2528,7 @@ static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
>> struct cfq_queue *__cfqq, *next;
>>
>> if (unlikely(cfqq == cfqd->active_queue)) {
>> - __cfq_slice_expired(cfqd, cfqq, 0);
>> + __cfq_slice_expired(cfqd, cfqq, 0, false);
>> cfq_schedule_dispatch(cfqd);
>> }
>>
>> @@ -3143,7 +3157,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
>> static void cfq_preempt_queue(struct cfq_data *cfqd, struct cfq_queue *cfqq)
>> {
>> cfq_log_cfqq(cfqd, cfqq, "preempt");
>> - cfq_slice_expired(cfqd, 1);
>> + cfq_slice_expired(cfqd, 1, false);
>>
>> /*
>> * Put the new queue at the front of the of the current list,
>> @@ -3191,7 +3205,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
>> if (cfq_cfqq_wait_request(cfqq)) {
>> if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE ||
>> cfqd->busy_queues > 1) {
>> - del_timer(&cfqd->idle_slice_timer);
>> + cfq_del_timer(cfqd, cfqq);
>> cfq_clear_cfqq_wait_request(cfqq);
>> __blk_run_queue(cfqd->queue);
>> } else
>> @@ -3352,7 +3366,7 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
>> * - when there is a close cooperator
>> */
>> if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq))
>> - cfq_slice_expired(cfqd, 1);
>> + cfq_slice_expired(cfqd, 1, false);
>> else if (sync && cfqq_empty &&
>> !cfq_close_cooperator(cfqd, cfqq)) {
>> cfqd->noidle_tree_requires_idle |= !rq_noidle(rq);
>> @@ -3612,7 +3626,7 @@ static void cfq_idle_slice_timer(unsigned long data)
>> cfq_clear_cfqq_deep(cfqq);
>> }
>> expire:
>> - cfq_slice_expired(cfqd, timed_out);
>> + cfq_slice_expired(cfqd, timed_out, false);
>> out_kick:
>> cfq_schedule_dispatch(cfqd);
>> out_cont:
>> @@ -3655,7 +3669,7 @@ static void cfq_exit_queue(struct elevator_queue *e)
>> spin_lock_irq(q->queue_lock);
>>
>> if (cfqd->active_queue)
>> - __cfq_slice_expired(cfqd, cfqd->active_queue, 0);
>> + __cfq_slice_expired(cfqd, cfqd->active_queue, 0, false);
>>
>> while (!list_empty(&cfqd->cic_list)) {
>> struct cfq_io_context *cic = list_entry(cfqd->cic_list.next,
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/