Re: s2ram slow (radeon) / failing (usb)

[Alan Stern]

On Mon, 3 May 2010, Bruno [UTF-8] Prémont wrote:

> On Sun, 2 May 2010 17:59:17 -0400 (EDT) Alan Stern wrote:
> > On Sun, 2 May 2010, Bruno [UTF-8] Prémont wrote:
> > 
> > > > There's no way to fix the USB problem without knowing what goes
> > > > wrong. Let's see how far you get before the system freezes on a
> > > > kernel with CONFIG_USB_DEBUG enabled.
> > > 
> > > Am I missing something?
> > > 
> > > I've enabled CONFIG_USB_DEBUG but don't see any additional module
> > > parameter nor anything extra to toggle and I don't get more output
> > > than without it.
> > 
> > Depends what you mean by "output".  The kernel generates more log 
> > messages, but they may not get sent to your console.  You need to
> > make sure the console's log level is set high enough to see debugging 
> > messages.  For example:
> > 
> > 	echo 9 >/proc/sys/kernel/printk
> > 
> > or type Alt-SysRq-9.
> 
> I've been doing `dmesg -n 8` (9 is rejected as invalid) so it should
> send out everything.

Yes, that's equivalent to the other things.

> It looked like there was some more output during boot-up, but nothing
> during suspend, at least up to the freezing point.

Did you boot with "no_console_suspend"?  Are you using a VT console
instead of X (a serial console may or may not work as well)?

You might also want to #define VERBOSE_DEBUG at the start of 
drivers/usb/core/driver.c, before the first #include.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/