[git patches] libata fixes

From: Jeff Garzik
Date: Wed May 05 2010 - 14:54:24 EST

Next message: Roland Dreier: "Re: [PATCH -next] infiniband: fix cxgb4 printk format warnings"
Previous message: Matthew Garrett: "Re: [PATCH 0/8] Suspend block api (version 6)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

A correction for an added-during-rc PCMCIA ID patch,
and a small doc update.

Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

Documentation/DocBook/libata.tmpl | 49 ++++++++++++-------------------------
drivers/ata/pata_pcmcia.c | 4 +-
drivers/ide/ide-cs.c | 4 +-
3 files changed, 20 insertions(+), 37 deletions(-)

Kristoffer Ericson (1):
pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs

Sergei Shtylyov (1):
libata: Fix several inaccuracies in developer's guide

diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index ba99757..ff3e5be 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
<para>
- Called by ata_device_add() after ata_dev_identify() determines
- a device is present.
- </para>
- <para>
This entry may be specified as NULL in ata_port_operations.
</para>

@@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in

<sect2><title>Taskfile read/write</title>
<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>

<para>
@@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
hardware registers / DMA buffers, to obtain the current set of
taskfile register values.
Most drivers for taskfile-based hardware (PIO or MMIO) use
- ata_tf_load() and ata_tf_read() for these hooks.
+ ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
</para>

</sect2>

<sect2><title>PIO data read/write</title>
<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
</programlisting>

<para>
All bmdma-style drivers must implement this hook. This is the low-level
operation that actually copies the data bytes during a PIO data
transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
</para>

</sect2>

<sect2><title>ATA command execute</title>
<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>

<para>
causes an ATA command, previously loaded with
->tf_load(), to be initiated in hardware.
- Most drivers for taskfile-based hardware use ata_exec_command()
+ Most drivers for taskfile-based hardware use ata_sff_exec_command()
for this hook.
</para>

@@ -218,8 +213,8 @@ command.

<sect2><title>Read specific ATA shadow registers</title>
<programlisting>
-u8 (*check_status)(struct ata_port *ap);
-u8 (*check_altstatus)(struct ata_port *ap);
+u8 (*sff_check_status)(struct ata_port *ap);
+u8 (*sff_check_altstatus)(struct ata_port *ap);
</programlisting>

<para>
@@ -227,20 +222,14 @@ u8 (*check_altstatus)(struct ata_port *ap);
hardware. On some hardware, reading the Status register has
the side effect of clearing the interrupt condition.
Most drivers for taskfile-based hardware use
- ata_check_status() for this hook.
- </para>
- <para>
- Note that because this is called from ata_device_add(), at
- least a dummy function that clears device interrupts must be
- provided for all drivers, even if the controller doesn't
- actually have a taskfile status register.
+ ata_sff_check_status() for this hook.
</para>

</sect2>

<sect2><title>Select ATA device on bus</title>
<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>

<para>
@@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
</para>
<para>
Most drivers for taskfile-based hardware use
- ata_std_dev_select() for this hook. Controllers which do not
- support second drives on a port (such as SATA contollers) will
- use ata_noop_dev_select().
+ ata_sff_dev_select() for this hook.
</para>

</sect2>
@@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *);
to struct ata_host_set.
</para>
<para>
- Most legacy IDE drivers use ata_interrupt() for the
+ Most legacy IDE drivers use ata_sff_interrupt() for the
irq_handler hook, which scans all ports in the host_set,
determines which queued command was active (if any), and calls
- ata_host_intr(ap,qc).
+ ata_sff_host_intr(ap,qc).
</para>
<para>
- Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+ Most legacy IDE drivers use ata_sff_irq_clear() for the
irq_clear() hook, which simply clears the interrupt and error
flags in the DMA status register.
</para>
@@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set);
data from port at this time.
</para>
<para>
- Many drivers use ata_port_stop() as this hook, which frees the
- PRD table.
- </para>
- <para>
->host_stop() is called after all ->port_stop() calls
have completed. The hook must finalize hardware shutdown, release DMA
and other resources, etc.
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 4164dd2..d94b8f0 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -424,7 +424,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
- PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
@@ -446,7 +446,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index defce28..b854508 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -409,7 +409,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
- PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
@@ -431,7 +431,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Roland Dreier: "Re: [PATCH -next] infiniband: fix cxgb4 printk format warnings"
Previous message: Matthew Garrett: "Re: [PATCH 0/8] Suspend block api (version 6)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]