[PATCH 3/3] [RFC] power/ds2760_battery: use factor of 50 for rated_capacity

[Daniel Mack]

In the ds2760 driver, the currently used factor of 10 to store the rated
battery capacity internally is not sufficient for batteries > 2.55 Ah,
as the 8-bit register will overflow.

Change the factor to 20 to broaden that range. Note that due to
RATED_CAPACITY_FACTOR, the internal interface won't change, neither for
the writeable sysfs entires nor for the kernel rated_capacity module
parameter.

Signed-off-by: Daniel Mack <daniel@xxxxxxxx>
Cc: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
Cc: Matt Reimer <mreimer@xxxxxxxx>
Cc: Evgeniy Polyakov <zbr@xxxxxxxxxxx>
Cc: Tejun Heo <tj@xxxxxxxxxx>
Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Cc: Len Brown <len.brown@xxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
 drivers/power/ds2760_battery.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 14df424..66d8dae 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -78,7 +78,7 @@ MODULE_PARM_DESC(current_accum, "current accumulator value");
 
 /* Some batteries have their rated capacity stored a N * 10 mAh, while
  * others use an index into this table. */
-#define RATED_CAPACITY_FACTOR 10
+#define RATED_CAPACITY_FACTOR 20
 static int rated_capacities[] = {
 	0,
 	920,	/* Samsung */
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/