Re: Marvell eSATA - 88SE6121 on Asus M3A79-T Deluxe - not in AHCI

[Jeff Garzik]

On 05/11/2010 10:11 PM, Phil Turmel wrote:
> Hi Jeff,
>
> On 05/11/2010 05:09 PM, Jeff Garzik wrote:
> > On 05/11/2010 02:28 PM, Phil Turmel wrote:
> > > On 05/11/2010 01:21 PM, Phil Reynolds wrote:
> > > > Quoting "Phil Turmel"<pturmel-kernel@xxxxxxxxxx>:
> > > >
> > > > > I have a similar chipset in my office server: 88SE6145.  If yours
> > > > > can run
> > > > > in AHCI mode, you just need "ahci.marvell_enable=1" on your kernel
> > > > > command
> > > > > line, or "options ahci marvell_enable=1" in your modprobe.conf.  (I
> > > > > have
> > > > > ahci built-in, and no initramfs, so I put the option in my grub.conf.)
> > > >
> > > > Neither works for me unfortunately.
>
> [snip /]
>
> > sata_mv is not related to this hardware.
> >
> > pata_marvell works with 6101/6121/6141/6145 PATA ports.
> >
> > ahci works with 6101/6121/6141/6145 SATA ports, with marvell_enable=1.
> >
> >      Jeff
>
> I think you might have me (Phil T) confused with the original poster, Phil
> Reynolds [1].

No confusion.  You suggested blacklisting sata_mv, and I note above that 
sata_mv has nothing to do with the hardware in question.

	Jeff



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/