Re: [PATCH]460EX on-chip SATA driver <Kernel 2.6.33> < resubmission >

[Stefan Roese]

Hi Ben,

On Sunday 16 May 2010 01:40:28 Benjamin Herrenschmidt wrote:
> > > +		SATA0: sata@bffd1000 {
> > > +                        compatible = "amcc,sata-460ex";
> > > +			reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
> > > +                        interrupt-parent = <&UIC3>;
> > > +                        interrupts = <0x0 0x4       /* SATA */
> > > +                                      0x5 0x4>;     /* AHBDMA */
> > > +                };
> > > +
> > > 
> > >  		POB0: opb {
> > >  		
> > >  			compatible = "ibm,opb-460ex", "ibm,opb";
> > >  			#address-cells = <1>;
> >    
> >    Please put the device tree update in a separate patch to go thru the
> > 
> > PowerPC tree.
> 
> Additionally, the boot wrapper should probably either remove the node or
> at least use a status property "ok" / "disabled" to represent whether
> the board is configured for SATA or PCIe x1...

U-Boot already sets the "status" property of the PCIe or SATA node 
accordingly. Just let me know if this doesn't work for you.

Cheers,
Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/