[GIT PULL] davinci platform updates for 2.6.35
From: Kevin Hilman
Date: Wed May 19 2010 - 15:00:54 EST
Linus,
Please pull the following davinci platform updates for 2.6.35.
Sorry for the last-minute revert, but realized that one RTC patch had
not recieved the proper signoffs from RTC maintainers, and I figured a
revert would be preferred over a rebase at this point.
Thanks,
Kevin
The following changes since commit 66f41d4c5c8a5deed66fdcc84509376c9a0bf9d8:
Linus Torvalds (1):
Linux 2.6.34-rc6
are available in the git repository at:
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci.git davinci-for-linus
Anuj Aggarwal (1):
davinci: edma: clear interrupt status for interrupt enabled channels only
Cyril Chemparathy (28):
Davinci: allow SOCs based on other ARM CPUs
Davinci: enable timer clock before use
Davinci: cpintc host map configuration
Davinci: support LPSC SwRstDisable state
Davinci: promote da8xx_pinmux_setup()
Davinci: tnetv107x pin list
Davinci: tnetv107x LPSC modules
Davinci: tnetv107x IRQ definitions
Davinci: tnetv107x cpu types
Davinci: configurable pll divider mask
Davinci: gpio - minor cleanup
Davinci: gpio - structs and functions renamed
Davinci: gpio - register layout invariant inlines
Davinci: gpio - controller type support
Davinci: gpio - fine grained locking
Davinci: eliminate pinmux offset verbosity
Davinci: watchdog reset separation across socs
Davinci: serial - remove unnecessary define
Davinci: serial - use ioremap()
Davinci: serial - conditional reset via pwremu
Davinci: gpio - use ioremap()
Davinci: da8xx: rtc - use ioremap
Davinci: jtag_id - use ioremap()
Davinci: timer - use ioremap()
Davinci: psc - use ioremap()
Davinci: aintc/cpintc - use ioremap()
Davinci: pinmux - use ioremap()
Davinci: iotable based ioremap() interception
Kevin Hilman (3):
davinci: misc cleanups from sparse
davinci: sparse: gpio: void casting
Revert "rtc: omap: let device wakeup capability be configured from chip init logic"
Miguel Aguilar (1):
RTC: DaVinci RTC driver
Sekhar Nori (5):
rtc: omap: let device wakeup capability be configured from chip init logic
davinci: edma: use a more intuitive name for edma_info
davinci: edma: fix coding style issue related to usage of braces
davinci: edma: use BIT() wherever possible
davinci: edma: fix coding style issue related to breaking lines
Sergei Shtylyov (3):
DaVinci: move AEMIF #define's to the proper headers
DA830 EVM: use DA8XX_AEMIF_*_BASE #define's
DaVinci: move IDE platform device to its proper place
Thomas Koeller (5):
davinci: DM365: Allow use of GPIO64_57
davinci: mach/common.h: add missing includes
DM365: Added PINMUX definitions for GPIO30..32
DM365: Make CLKOUTx available
DM365: Added more PINMUX configurations for AEMIF
Vipin Bhandari (2):
davinci: da830/omap-l137 evm: add support for GPIO based MMC/SD card detection
davinci: da830/omap-l137 evm: use 8-wire MMC/SD card support
arch/arm/Kconfig | 1 -
arch/arm/mach-davinci/Kconfig | 2 +
arch/arm/mach-davinci/board-da830-evm.c | 52 ++-
arch/arm/mach-davinci/board-da850-evm.c | 28 +-
arch/arm/mach-davinci/board-dm355-evm.c | 18 +-
arch/arm/mach-davinci/board-dm355-leopard.c | 18 +-
arch/arm/mach-davinci/board-dm365-evm.c | 12 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 60 +--
arch/arm/mach-davinci/board-dm646x-evm.c | 22 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 54 +--
arch/arm/mach-davinci/board-sffsdr.c | 20 +-
arch/arm/mach-davinci/cdce949.c | 1 +
arch/arm/mach-davinci/clock.c | 32 +-
arch/arm/mach-davinci/clock.h | 9 +-
arch/arm/mach-davinci/common.c | 57 ++-
arch/arm/mach-davinci/cp_intc.c | 22 +-
arch/arm/mach-davinci/da830.c | 29 +-
arch/arm/mach-davinci/da850.c | 30 +-
arch/arm/mach-davinci/devices-da8xx.c | 15 +-
arch/arm/mach-davinci/devices.c | 50 ++-
arch/arm/mach-davinci/dm355.c | 21 +-
arch/arm/mach-davinci/dm365.c | 34 +-
arch/arm/mach-davinci/dm644x.c | 21 +-
arch/arm/mach-davinci/dm646x.c | 53 +--
arch/arm/mach-davinci/dma.c | 234 +++++-----
arch/arm/mach-davinci/gpio.c | 160 ++++---
arch/arm/mach-davinci/include/mach/common.h | 32 +-
arch/arm/mach-davinci/include/mach/cp_intc.h | 3 +-
arch/arm/mach-davinci/include/mach/cputype.h | 8 +
arch/arm/mach-davinci/include/mach/da8xx.h | 29 +-
arch/arm/mach-davinci/include/mach/dm355.h | 3 +
arch/arm/mach-davinci/include/mach/dm365.h | 4 +
arch/arm/mach-davinci/include/mach/dm644x.h | 6 +
arch/arm/mach-davinci/include/mach/dm646x.h | 4 +-
arch/arm/mach-davinci/include/mach/gpio.h | 72 ++--
arch/arm/mach-davinci/include/mach/irqs.h | 97 ++++
arch/arm/mach-davinci/include/mach/mux.h | 290 +++++++++++-
arch/arm/mach-davinci/include/mach/psc.h | 55 ++-
arch/arm/mach-davinci/include/mach/serial.h | 1 -
arch/arm/mach-davinci/include/mach/system.h | 5 +-
arch/arm/mach-davinci/io.c | 20 +-
arch/arm/mach-davinci/irq.c | 7 +-
arch/arm/mach-davinci/mux.c | 19 +-
arch/arm/mach-davinci/mux.h | 2 +-
arch/arm/mach-davinci/psc.c | 10 +-
arch/arm/mach-davinci/serial.c | 34 +-
arch/arm/mach-davinci/time.c | 37 +-
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-davinci.c | 673 ++++++++++++++++++++++++++
50 files changed, 1813 insertions(+), 664 deletions(-)
create mode 100644 drivers/rtc/rtc-davinci.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/