Re: [PATCH RT] ehea: make receive irq handler non-threaded (IRQF_NODELAY)

[Jan-Bernd Themann]

Hi Thomas

> Re: [PATCH RT] ehea: make receive irq handler non-threaded (IRQF_NODELAY)
>
> On Thu, 20 May 2010, Jan-Bernd Themann wrote:
> > > > Thought more about that. The case at hand (ehea) is nasty:
> > > >
> > > > The driver does _NOT_ disable the rx interrupt in the card in the
rx
> > > > interrupt handler - for whatever reason.
> > >
> > > Yeah I saw that, but I don't know why it's written that way. Perhaps
> > > Jan-Bernd or Doug will chime in and enlighten us? :)
> >
> > From our perspective there is no need to disable interrupts for the
> > RX side as the chip does not fire further interrupts until we tell
> > the chip to do so for a particular queue. We have multiple receive
>
> The traces tell a different story though:
>
>     ehea_recv_irq_handler()
>       napi_reschedule()
>     eoi()
>     ehea_poll()
>       ...
>       ehea_recv_irq_handler()    <---------------- ???
>         napi_reschedule()
>       ...
>       napi_complete()
>
> Can't tell whether you can see the same behaviour in mainline, but I
> don't see a reason why not.

Is this the same interrupt we are seeing here, or do we see a second other
interrupt popping up on the same CPU? As I said, with multiple receive
queues
(if enabled) you can have multiple interrupts in parallel.

Pleaes check if multiple queues are enabled. The following module parameter
is used for that:

MODULE_PARM_DESC(use_mcs, " 0:NAPI, 1:Multiple receive queues, Default = 0
");

you should also see the number of used HEA interrupts in /proc/interrupts


>
> > queues with an own interrupt each so that the interrupts can arrive
> > on multiple CPUs in parallel.  Interrupts are enabled again when we
> > leave the NAPI Poll function for the corresponding receive queue.
>
> I can't see a piece of code which does that, but that's probably just
> lack of detailed hardware knowledge on my side.

If you mean the "re-enable" piece of code, it is not very obvious, you are
right.
Interrupts are only generated if a particular register for our completion
queues
is written. We do this in the following line:

          ehea_reset_cq_ep(pr->recv_cq);
          ehea_reset_cq_ep(pr->send_cq);
          ehea_reset_cq_n1(pr->recv_cq);
          ehea_reset_cq_n1(pr->send_cq);

So this is in a way an indirect way to ask for interrupts when new
completions were
written to memory. We don't really disable/enable interrupts on the HEA
chip itself.

I think there are some mechanisms build in the HEA chip that should prevent
that
interrupts don't get lost. But that is something that is / was completely
hidden from
us, so my skill is very limited there.

If more details are needed here we should involve the PHYP guys + eHEA HW
guys if not
already done. Did anyone already talk to them?

Regards,
Jan-Bernd

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/