Re: pxa300 - DDRAM base value

[Mike Rapoport]

> hi,
>       Now, I can able to boot after editing following files
> arch/arm/mach-pxa/Makefile.boot and arch/arm/mach/pxa/include/mach/memory.h
> (0x80000000 changed to 0xa0000000). My doubt is
> 1.why 0x80000000 (DDR phy address) is aliased to 0xa0000000 in pxa
> architecture?
> 2.In my development board two DDRAMs mapped at 0x80000000-0x88000000 and
> 0xc0000000-0xc8000000, how can I inform to kernel about this different bank
> and size?.

enable CONFIG_HIGHMEM

> My Boot loader details,
> ------------------------------
> =>bdi
> arch_number = 0x00000B04
> env_t       = 0x00000000
> boot_params = 0x80000100
> DRAM bank   = 0x00000000
> -> start    = 0x80000000
> -> size     = 0x08000000
> DRAM bank   = 0x00000001
> -> start    = 0xC0000000
> -> size     = 0x08000000
> ethaddr     = 08:00:3e:26:0a:5b
> ip_addr     = 192.168.0.21
> baudrate    = 115200 bps
> =>ver
> U-Boot 2010.03 (Jun 01 2010 - 14:27:43)
>
>
> With Thanks
> J.Balakrishnan
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>



-- 
	Sincerely Yours,
		Mike.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/