Re: [PATCH v2] sata_sil24: Use memory barriers before issuing commands
From: Robert Hancock
Date: Thu Jun 10 2010 - 20:43:17 EST
On 06/10/2010 10:23 AM, Catalin Marinas wrote:
On Thu, 2010-06-10 at 17:12 +0100, Tejun Heo wrote:
On 06/10/2010 06:02 PM, Catalin Marinas wrote:
The data in the cmd_block buffers may reach the main memory after the
writel() to the device ports. This patch introduces two calls to wmb()
to ensure the relative ordering.
Signed-off-by: Catalin Marinas<catalin.marinas@xxxxxxx>
Tested-by: Colin Tuckley<colin.tuckley@xxxxxxx>
Cc: Tejun Heo<tj@xxxxxxxxxx>
Cc: Jeff Garzik<jeff@xxxxxxxxxx>
I suppose you have tested and verified that this is actually
necessary, right?
Yes, otherwise we get random failures with this device on ARM.
I've been looking through the docs but couldn't
find anything which described the ordering between writes to main
memory and write[bwl]()'s. One thing that kind of bothers me is that
r/wmb()'s are for ordering memory accesses among CPUs which
participate in cache coherency protocol and although it may work right
in the above case I'm not really sure whether this is the right thing
to do. Do you have more information on the subject?
The mb() are not for ordering accesses among CPUs (though they would
cover this case as well). For inter-CPU ordering, we have smp_mb() and
friends. For all other cases, we have the mandatory barriers mb() and
friends and DMA is one of them.
Apart from the memory-barriers.txt document, there is the Device I/O
docbook which mentions something about DMA buffers, though not very
clear on which barriers to use (something like just make sure that the
writes to the buffer reached the memory).
There were some past discussions on linux-arch before and I'm cc'ing
this list again (ARM is not the only architecture with a weakly memory
ordering model).
I'm copying the patch below again for the linux-arch people that haven't
seen the beginning of the thread:
My memory is fuzzy but I thought this came up before on PPC and I also
thought the conclusion was that the platform code (for writel, etc.)
should enforce ordering of MMIO accesses with respect to normal RAM
accesses. (Or maybe it was just MMIO accesses with respect to each
other?) I don't think the answer to that question has been clearly
documented anywhere, which is somewhat unfortunate.
If the answer is that this is needed then there are likely a lot of
other drivers in libata and elsewhere which need to be fixed as well.
For example, I don't see any such barriers in libahci.c when I presume
it would need them.
IMHO, it would be better for the platform code to ensure that MMIO
access was strongly ordered with respect to each other and to RAM
access. Drivers are just too likely to get this wrong, especially when
x86, the most tested platform, doesn't have such issues.
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e925051..a5d5aff 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -622,6 +622,11 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
+ /*
+ * The barrier is required to ensure that writes to cmd_block reach
+ * the memory before the write to PORT_CMD_ACTIVATE.
+ */
+ wmb();
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
writel((u64)paddr>> 32, port + PORT_CMD_ACTIVATE + 4);
@@ -895,6 +900,11 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
activate = port + PORT_CMD_ACTIVATE + tag * 8;
+ /*
+ * The barrier is required to ensure that writes to cmd_block reach
+ * the memory before the write to PORT_CMD_ACTIVATE.
+ */
+ wmb();
writel((u32)paddr, activate);
writel((u64)paddr>> 32, activate + 4);
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/