Re: Why is kslowd accumulating so much CPU time?

[Dave Airlie]

On Mon, Jun 14, 2010 at 5:49 AM,  <tytso@xxxxxxx> wrote:
> On Sun, Jun 13, 2010 at 06:23:45PM +1000, Dave Airlie wrote:
>>
>> Its an output polling feature of KMS, however it shouldn't cause
>> disruption elsewhere, but we are holding a mutex in there that there
>> isn't a real need to hold, so I suspect I'll drop that.
>
>> What GPU is it?
>
> It's a Lenovo T400, with an Intel GPU:
>
> (--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 Intel Corporation Mobile 4 Series Chipse
> t Integrated Graphics Controller rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268
> 435456, I/O @ 0x00001800/8
>
> Why does KMS need to poll so frequently?  40 minutes of CPU time
> accumulated in 4 hours of uptime translates to 16% of the CPU being
> consumed by kslowd daemons, which seems... excessive.
>
> I've seen upgraded the userspace to Ubuntu Lucid (from Karmic) and the
> kernel to a post 2.6.35-rc2 (without the vt memory corruptor), and
> after 4 days, 5 hours of uptime, and I'm seeing something better:
>
> root      6390  4.7  0.0      0     0 ?        S<   Jun12  49:12 [kslowd001]
> root      6784  2.4  0.0      0     0 ?        S<   Jun09 150:50 [kslowd003]
> root     20047  2.7  0.0      0     0 ?        S<   Jun10 122:38 [kslowd002]
> root     32324  4.6  0.0      0     0 ?        S<   Jun12  49:54 [kslowd000]
>
> So that's 372 minutes of CPU time accumulated by kslowd in 6060
> minutes, or about 6% of the CPU --- but part of tha time the laptop
> was suspended --- and it still seems high.
>
> I have the following patch which I'm going to install later tonight to
> see if I can figure out if it really is drm_crtc_helper.c which is
> really responsible for all of the kslowd time being burned, but an
> examination of the source doesn't seem to show any other that I'm
> using that would likely be using the slow workqueue.

It most likely is, but polling shouldn't really be taking huge amounts
of CPU, unless there are some u/mdelays in there which would be bad.

In theory on Intel with hotplug irqs we shouldn't be poilling at all,
I must check why, the other thing is you could be suffering from the
hotplug irq problem that others have reported, this would cause slow
work triggers which aren't part of the normal poll cycle.

Dave.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/