Re: [PATCH] pcf857x: support working w/o platform data
From: Dmitry Eremin-Solenikov
Date: Sun Jun 27 2010 - 02:38:59 EST
Hello,
On 6/25/10, David Brownell <david-b@xxxxxxxxxxx> wrote:
>
> --- On Thu, 6/17/10, Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx> wrote:
>
>> Provide sane defaults for pcf857x, so
>> the driver can be used w/o
>> providing platform data (and thus can be simply bound via OF tree).
>
>
> Maybe we can get an ack from some OF folk
> who are using it in that way?
Please see arch/powerpc/boot//dts/mpc8349emitx.dts (the platform I'm using it).
>> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
>> ---
>> drivers/gpio/pcf857x.c | 9 ++++-----
>> 1 files changed, 4 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpio/pcf857x.c
>> b/drivers/gpio/pcf857x.c
>> index 29f19ce..879b473 100644
>> --- a/drivers/gpio/pcf857x.c
>> +++ b/drivers/gpio/pcf857x.c
>> @@ -190,7 +190,6 @@ static int pcf857x_probe(struct
>> i2c_client *client,
>> pdata = client->dev.platform_data;
>> if (!pdata) {
>>
>> dev_dbg(&client->dev, "no platform data\n");
>> - return -EINVAL;
>> }
>>
>> /* Allocate, initialize, and register
>> this gpio_chip. */
>> @@ -200,7 +199,7 @@ static int pcf857x_probe(struct
>> i2c_client *client,
>>
>> mutex_init(&gpio->lock);
>>
>> - gpio->chip.base =
>> pdata->gpio_base;
>> + gpio->chip.base = pdata ?
>> pdata->gpio_base : -1;
>> gpio->chip.can_sleep = 1;
>> gpio->chip.dev =
>> &client->dev;
>> gpio->chip.owner = THIS_MODULE;
>> @@ -278,7 +277,7 @@ static int pcf857x_probe(struct
>> i2c_client *client,
>> * to zero, our software copy
>> of the "latch" then matches the chip's
>> * all-ones reset
>> state. Otherwise it flags pins to be driven low.
>> */
>> - gpio->out = ~pdata->n_latch;
>> + gpio->out = pdata ?
>> ~pdata->n_latch : ~0;
>>
>> status =
>> gpiochip_add(&gpio->chip);
>> if (status < 0)
>> @@ -299,7 +298,7 @@ static int pcf857x_probe(struct
>> i2c_client *client,
>> /* Let platform code set up the GPIOs
>> and their users.
>> * Now is the first time
>> anyone could use them.
>> */
>> - if (pdata->setup) {
>> + if (pdata && pdata->setup)
>> {
>> status =
>> pdata->setup(client,
>>
>> gpio->chip.base, gpio->chip.ngpio,
>>
>> pdata->context);
>> @@ -322,7 +321,7 @@ static int pcf857x_remove(struct
>> i2c_client *client)
>> struct pcf857x
>> *gpio =
>> i2c_get_clientdata(client);
>> int
>>
>> status = 0;
>>
>> - if (pdata->teardown) {
>> + if (pdata &&
>> pdata->teardown) {
>> status =
>> pdata->teardown(client,
>>
>> gpio->chip.base, gpio->chip.ngpio,
>>
>> pdata->context);
>> --
>> 1.7.1
>>
>>
>
>
--
With best wishes
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/