[PATCH] spi: davinci: Added support for chip select using gpio

[Raffaele Recalcati]

From: Raffaele Recalcati <raffaele.recalcati@xxxxxxxxxx>

    It is not everytime possible, due to hardware constraints,
    to use the hw chip select available on spi port.
    So I add this possibility using a gpio as chip select.
    If controller_data variable is not null it is
    the gpio to be used as chip select.
    The default case is compatible with evmdm365.
    This patch has been developed against the
    http://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci.git
    git tree and has been tested on bmx board (similar to dm365 evm but with
    gpio as spi chip select).

Signed-off-by: Raffaele Recalcati <raffaele.recalcati@xxxxxxxxxx>
Signed-off-by: Davide Bonfanti <davide.bonfanti@xxxxxxxxxx>
---
 arch/arm/mach-davinci/dm365.c |   10 ++++++----
 drivers/spi/davinci_spi.c     |   27 ++++++++++++++++++---------
 2 files changed, 24 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a146849..42fd4a4 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -677,10 +677,12 @@ void __init dm365_init_spi0(unsigned chipselect_mask,
 	davinci_cfg_reg(DM365_SPI0_SDO);
 
 	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM365_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM365_SPI0_SDENA1);
+	if  (!((unsigned long) info->controller_data)) {
+		if (chipselect_mask & BIT(0))
+			davinci_cfg_reg(DM365_SPI0_SDENA0);
+		if (chipselect_mask & BIT(1))
+			davinci_cfg_reg(DM365_SPI0_SDENA1);
+	}
 
 	spi_register_board_info(info, len);
 
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index 95afb6b..621ae46 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -29,6 +29,7 @@
 #include <linux/spi/spi_bitbang.h>
 #include <linux/slab.h>
 
+#include <mach/gpio.h>
 #include <mach/spi.h>
 #include <mach/edma.h>
 
@@ -270,18 +271,26 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
 	pdata = davinci_spi->pdata;
 
 	/*
-	 * Board specific chip select logic decides the polarity and cs
-	 * line for the controller
-	 */
+	* Board specific chip select logic decides the polarity and cs
+	* line for the controller
+	*/
 	if (value == BITBANG_CS_INACTIVE) {
-		set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT);
-
-		data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT;
-		iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
-
+		if  ((unsigned long) spi->controller_data) {
+			gpio_set_value(spi->controller_data, \
+				!(spi->mode & SPI_CS_HIGH));
+		} else {
+			set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT);
+
+			data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT;
+			iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+		}
 		while ((ioread32(davinci_spi->base + SPIBUF)
-					& SPIBUF_RXEMPTY_MASK) == 0)
+				& SPIBUF_RXEMPTY_MASK) == 0)
 			cpu_relax();
+	} else {
+		if  ((unsigned long) spi->controller_data)
+			gpio_set_value(spi->controller_data, \
+				(spi->mode & SPI_CS_HIGH));
 	}
 }
 
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/