Re: [PATCH 1/5] staging: slicoss: Change return codes to -EYYY.
From: Denis Kirjanov
Date: Mon Jun 28 2010 - 06:17:44 EST
On Sun, Jun 27, 2010 at 5:20 PM, Kulikov Vasiliy <segooon@xxxxxxxxx> wrote:
> Change defined STATUS_XXX return codes to standard -EYYY.
>
> Signed-off-by: Kulikov Vasiliy <segooon@xxxxxxxxx>
> ---
> drivers/staging/slicoss/slicoss.c | 52 ++++++++++++++++++------------------
> 1 files changed, 26 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
> index bebf0fd..102d3ea 100644
> --- a/drivers/staging/slicoss/slicoss.c
> +++ b/drivers/staging/slicoss/slicoss.c
> @@ -452,7 +452,7 @@ static int __devinit slic_entry_probe(struct pci_dev *pcidev,
>
> status = slic_card_init(card, adapter);
>
> - if (status != STATUS_SUCCESS) {
> + if (status != 0) {
> card->state = CARD_FAIL;
> adapter->state = ADAPT_FAIL;
> adapter->linkstate = LINK_DOWN;
Can we really continue here?
> @@ -513,7 +513,7 @@ static int slic_entry_open(struct net_device *dev)
> }
> status = slic_if_init(adapter);
>
> - if (status != STATUS_SUCCESS) {
> + if (status != 0) {
> if (adapter->activated) {
> card->adapters_activated--;
> slic_global.num_slic_ports_active--;
> @@ -535,7 +535,7 @@ static int slic_entry_open(struct net_device *dev)
> locked = 0;
> }
>
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> static void __devexit slic_entry_remove(struct pci_dev *pcidev)
> @@ -628,7 +628,7 @@ static int slic_entry_halt(struct net_device *dev)
>
> spin_unlock_irqrestore(&slic_global.driver_lock.lock,
> slic_global.driver_lock.flags);
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
> @@ -1206,7 +1206,7 @@ static void slic_link_event_handler(struct adapter *adapter)
> #else
> Stop compilation;
> #endif
> - ASSERT((status == STATUS_SUCCESS) || (status == STATUS_PENDING));
> + ASSERT(status == 0);
> }
>
Now that looks useless since slic_upr_request can return STATUS_PENDING
or -ENOMEM. Same for slic_config_get
> static void slic_init_cleanup(struct adapter *adapter)
> @@ -1265,7 +1265,7 @@ static int slic_mcast_add_list(struct adapter *adapter, char *address)
> mlist = adapter->mcastaddrs;
> while (mlist) {
> if (!compare_ether_addr(mlist->address, address))
> - return STATUS_SUCCESS;
> + return 0;
> mlist = mlist->next;
> }
>
> @@ -1279,7 +1279,7 @@ static int slic_mcast_add_list(struct adapter *adapter, char *address)
> mcaddr->next = adapter->mcastaddrs;
> adapter->mcastaddrs = mcaddr;
>
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> /*
> @@ -1365,7 +1365,7 @@ static void slic_mcast_set_bit(struct adapter *adapter, char *address)
> static void slic_mcast_set_list(struct net_device *dev)
> {
> struct adapter *adapter = netdev_priv(dev);
> - int status = STATUS_SUCCESS;
> + int status = 0;
> char *addresses;
> struct netdev_hw_addr *ha;
>
> @@ -1374,7 +1374,7 @@ static void slic_mcast_set_list(struct net_device *dev)
> netdev_for_each_mc_addr(ha, dev) {
> addresses = (char *) &ha->addr;
> status = slic_mcast_add_list(adapter, addresses);
> - if (status != STATUS_SUCCESS)
> + if (status != 0)
> break;
> slic_mcast_set_bit(adapter, addresses);
> }
> @@ -1394,7 +1394,7 @@ static void slic_mcast_set_list(struct net_device *dev)
> adapter->devflags_prev = dev->flags;
> slic_config_set(adapter, true);
> } else {
> - if (status == STATUS_SUCCESS)
> + if (status == 0)
> slic_mcast_set_mask(adapter);
> }
> return;
> @@ -1476,7 +1476,7 @@ static int slic_if_init(struct adapter *adapter)
> adapter->macopts |= MAC_MCAST;
> }
> status = slic_adapter_allocresources(adapter);
> - if (status != STATUS_SUCCESS) {
> + if (status != 0) {
> dev_err(&dev->dev,
> "%s: slic_adapter_allocresources FAILED %x\n",
> __func__, status);
> @@ -1553,7 +1553,7 @@ static int slic_if_init(struct adapter *adapter)
> slic_link_config(adapter, LINK_AUTOSPEED, LINK_AUTOD);
> slic_link_event_handler(adapter);
>
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> static void slic_unmap_mmio_space(struct adapter *adapter)
> @@ -1587,7 +1587,7 @@ static int slic_adapter_allocresources(struct adapter *adapter)
> }
> adapter->intrregistered = 1;
> }
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> static void slic_config_pci(struct pci_dev *pcidev)
> @@ -1967,7 +1967,7 @@ static int slic_card_download(struct adapter *adapter)
> and reach mainloop */
> mdelay(20);
>
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> MODULE_FIRMWARE("slicoss/oasisdownload.sys");
> @@ -2027,7 +2027,7 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
> /* Download the microcode */
> status = slic_card_download(adapter);
>
> - if (status != STATUS_SUCCESS) {
> + if (status != 0) {
> dev_err(&adapter->pcidev->dev,
> "download failed bus %d slot %d\n",
> adapter->busnumber, adapter->slotnumber);
> @@ -2203,7 +2203,7 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
> card->state = CARD_UP;
> card->reset_in_progress = 0;
>
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> static u32 slic_card_locate(struct adapter *adapter)
> @@ -2267,7 +2267,7 @@ static u32 slic_card_locate(struct adapter *adapter)
>
> ASSERT(card);
> if (!card)
> - return STATUS_FAILURE;
> + return -ENOMEM;
Is -ENOMEM correct for this case?
> /* Put the adapter in the card's adapter list */
> ASSERT(card->adapter[adapter->port] == NULL);
> if (!card->adapter[adapter->port]) {
> @@ -2637,7 +2637,7 @@ static int slic_upr_queue_request(struct adapter *adapter,
> } else {
> adapter->upr_list = upr;
> }
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> static int slic_upr_request(struct adapter *adapter,
> @@ -2653,7 +2653,7 @@ static int slic_upr_request(struct adapter *adapter,
> upr_request,
> upr_data,
> upr_data_h, upr_buffer, upr_buffer_h);
> - if (status != STATUS_SUCCESS) {
> + if (status != 0) {
> spin_unlock_irqrestore(&adapter->upr_lock.lock,
> adapter->upr_lock.flags);
> return status;
> @@ -2661,7 +2661,7 @@ static int slic_upr_request(struct adapter *adapter,
> slic_upr_start(adapter);
> spin_unlock_irqrestore(&adapter->upr_lock.lock,
> adapter->upr_lock.flags);
> - return STATUS_PENDING;
> + return 0;
> }
>
> static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
> @@ -3032,7 +3032,7 @@ static int slic_rspqueue_init(struct adapter *adapter)
> dev_err(&adapter->pcidev->dev,
> "pci_alloc_consistent failed\n");
> slic_rspqueue_free(adapter);
> - return STATUS_FAILURE;
> + return -ENOMEM;
> }
> #ifndef CONFIG_X86_64
> ASSERT(((u32) rspq->vaddr[i] & 0xFFFFF000) ==
> @@ -3056,7 +3056,7 @@ static int slic_rspqueue_init(struct adapter *adapter)
> rspq->offset = 0;
> rspq->pageindex = 0;
> rspq->rspbuf = (struct slic_rspbuf *)rspq->vaddr[0];
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> static void slic_rspqueue_free(struct adapter *adapter)
> @@ -3180,13 +3180,13 @@ static int slic_cmdq_init(struct adapter *adapter)
> #endif
> if (!pageaddr) {
> slic_cmdq_free(adapter);
> - return STATUS_FAILURE;
> + return -ENOMEM;
> }
> slic_cmdq_addcmdpage(adapter, pageaddr);
> }
> adapter->slic_handle_ix = 1;
>
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> static void slic_cmdq_free(struct adapter *adapter)
> @@ -3407,9 +3407,9 @@ static int slic_rcvqueue_init(struct adapter *adapter)
> }
> if (rcvq->count < SLIC_RCVQ_MINENTRIES) {
> slic_rcvqueue_free(adapter);
> - return STATUS_FAILURE;
> + return -ENOMEM;
> }
> - return STATUS_SUCCESS;
> + return 0;
> }
>
> static void slic_rcvqueue_free(struct adapter *adapter)
> --
> 1.7.0.4
>
>
--
Regards,
Denis
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/