Re: BUG in drivers/dma/ioat/dma_v2.c:314

[Dan Williams]

On 6/30/2010 1:02 PM, Woodhouse, David wrote:
> On Wed, 2010-06-30 at 20:40 +0100, Williams, Dan J wrote:
> >    From the dmesg:
> > > IOMMU 0: reg_base_addr fe710000 ver 1:0 cap 900000c2f0462 ecap e01
> > > DMAR: DRHD base: 0x000000fe714000 flags: 0x0
> > > IOMMU 1: reg_base_addr fe714000 ver 1:0 cap 900000c2f0462 ecap e01
> > > DMAR: DRHD base: 0x000000fe719000 flags: 0x0
> > > IOMMU 2: reg_base_addr fe719000 ver 1:0 cap 900000c2f0462 ecap e01
> > > DMAR: DRHD base: 0x000000fe718000 flags: 0x1
> > > IOMMU 3: reg_base_addr fe718000 ver 1:0 cap 900000c2f0462 ecap e01
> >
> > Where we expect bit 54 to be set for the DMA iommu, and it does not
> > appear to show up.
>
> So the BIOS is lying to us about which PCI devices are attached to which
> IOMMU?

It certainly looks that way, or it is at least ignoring any iommu that 
is not associated with a root port.  I have a supermicro x7dwn+ board 
here with the same 5400 series chipset that "does the right thing (TM)":

> [    0.052101] DMAR: Host address width 38
> [    0.053004] DMAR: DRHD base: 0x000000fe710000 flags: 0x0
> [    0.054008] IOMMU fe710000: ver 1:0 cap 900800c2f0462 ecap e01
> [    0.055003] DMAR: DRHD base: 0x000000fe712000 flags: 0x0
> [    0.056012] IOMMU fe712000: ver 1:0 cap 900800c2f0462 ecap e01
> [    0.057003] DMAR: DRHD base: 0x000000fe714000 flags: 0x0
> [    0.058007] IOMMU fe714000: ver 1:0 cap 900800c2f0462 ecap e01
> [    0.059003] DMAR: DRHD base: 0x000000fe716000 flags: 0x0
> [    0.060006] IOMMU fe716000: ver 1:0 cap 900800c2f0462 ecap e01
> [    0.061003] DMAR: DRHD base: 0x000000fe719000 flags: 0x0
> [    0.062007] IOMMU fe719000: ver 1:0 cap 900800c2f0462 ecap e01
> [    0.063003] DMAR: DRHD base: 0x000000fe71a000 flags: 0x0
> [    0.064011] IOMMU fe71a000: ver 1:0 cap 4900800c2f0462 ecap e01

Here is our DMA iommu.

> [    0.065003] DMAR: DRHD base: 0x000000fe718000 flags: 0x1
> [    0.066007] IOMMU fe718000: ver 1:0 cap 900800c2f0462 ecap e01
> [    0.067003] DMAR: RMRR base: 0x000000bff6b000 end: 0x000000bff72fff
> [    0.068003] DMAR: No ATSR found
[..]
> # modprobe ioatdma
> [   36.311819] dca service started, version 1.12.1
> [   36.334934] ioatdma: Intel(R) QuickData Technology Driver 4.00
> [   36.341245]   alloc irq_desc for 57 on node -1
> [   36.342154]   alloc kstat_irqs on node -1
> [   36.350418] ioatdma 0000:00:0f.0: PCI INT A -> GSI 57 (level, low) -> IRQ 57
> [   36.357916] ioatdma 0000:00:0f.0: setting latency timer to 64
> [   36.364091]   alloc irq_desc for 104 on node -1
> [   36.365056]   alloc kstat_irqs on node -1
> [   36.373334] ioatdma 0000:00:0f.0: irq 104 for MSI/MSI-X
> [   36.378957]   alloc irq_desc for 105 on node -1
> [   36.379954]   alloc kstat_irqs on node -1
> [   36.388203] ioatdma 0000:00:0f.0: irq 105 for MSI/MSI-X
> [   36.400150]   alloc irq_desc for 106 on node -1
> [   36.401147]   alloc kstat_irqs on node -1
> [   36.409417] ioatdma 0000:00:0f.0: irq 106 for MSI/MSI-X
> [   36.415036]   alloc irq_desc for 107 on node -1
> [   36.416032]   alloc kstat_irqs on node -1
> [   36.424304] ioatdma 0000:00:0f.0: irq 107 for MSI/MSI-X
> [   36.430263] ioatdma 0000:00:0f.0: APICID_TAG_MAP set incorrectly by BIOS, disabling DCA

...and here is the ioatdma driver coming up correctly (albeit with a dca 
misconfiguration)

I don't see a way around this beyond blacklisting this (platform, vt-d 
setting, driver) combination.  Is there a quirk infrastructure for this 
sort of problem?

Chris, is there a BIOS update available for your platform?

--
Dan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/