Re: [PATCH] Add quick erase format option

[Stefani Seibold]

Am Montag, den 09.08.2010, 09:37 +0100 schrieb David Woodhouse:
> On Mon, 2010-08-09 at 09:25 +0100, stefani@xxxxxxxxxxx wrote:
> > From: Stefani Seibold <stefani@xxxxxxxxxxx>
> > 
> > This patch add a quick format option which skips erasing of already erased
> > flash blocks. This is useful for first time production environments where
> > the flash arrived erased.
> > 
> > Signed-off-by: Stefani Seibold <stefani@xxxxxxxxxxx> 
> 
> This scares me, given the lengths we had to go to in JFFS2 to cope with
> blocks which *look* like they're erased, but which actually start losing
> data as soon as you start writing to them because the erase didn't
> complete.
> 

I know the drawback. This is why it is only an option which must be
enabled. And in most use cases there is a subsequent ubimkvol, which
will fail if the flash is not correct initialized.

Flash are normally delivered erased. So this save in our production
environment (Nokia Siemens Networks) about 5 minutes per device (256 MB
NOR CFI Flash).

The old JFFS2 was very fast to install the first time on a flash, it was
only a simple mount of the MTD partition. 

Which the quick format option i have now only a slightly first time
installation overhead compared to JFFS2. Without this option the
overhead is more than 5 minutes.

- Stefani


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/