Re: [2.6.35] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 BUG: unable to handle kernel NULL pointer dereference at 0000000000000198

From: Sander Eikelenboom
Date: Tue Aug 10 2010 - 13:37:54 EST

Next message: Randy Dunlap: "Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to2.6.35"
Previous message: Greg KH: "Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to2.6.35"
Next in thread: Joerg Roedel: "Re: [2.6.35] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 BUG:unable to handle kernel NULL pointer dereference at 0000000000000198"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello Joerg,

The requested info is attached.
So that would mean a bios problem ? (those are not on my wishlist :-p)

--
Sander

Tuesday, August 10, 2010, 6:26:06 PM, you wrote:

> On Tue, Aug 10, 2010 at 04:48:50PM +0200, Sander Eikelenboom wrote:
>> Hi Joerg,
>>
>> Trying to boot 2.6.35 with amd iommu enabled on a MSI 890FXA-GD70
>> motherboard with AMD 890FX chipset results in the oops below, complete
>> serial log attached.

> Ok, I have a theory whats going on. It looks like one of your devices
> aliases to an non-existent pci-bdf. But please send me the data I
> requested so I can verify this.

> Joerg

--
Best regards,
Sander mailto:linux@xxxxxxxxxxxxxx

Attachment: .config
Description: Binary data

[ 0.000000] Itializing cgroupubsys cpuset
[ 0.000000] Initlizing cgroup suys cpu
[ 0.0000] Linux versin 2.6.352.6.35-villa-xhci-isoc+ oot@serveerstert) (gcc version 4.2 (Debian 4.3.2.1) ) #2 SMP Tue
ug 10 16:10:45 CT 2010
[ 0.0000] Command lin: root=/dev/mapp/serveerstertje-ot ro console=tt console=ttyS0,1200n8 amd_iommu_mp
[ 0.00000 BIOS-provided pysical RAM map:[ 0.000000] BS-e820: 00000000000000 - 0000000009ac00 (usable)[ 0.000000] OS-e820: 0000000009ac00 - 000000000a000
0 (reserv)
[ 0.000000 BIOS-e820: 0000000000e4000 - 00000000100000 (rerved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7e90000 (usable)
[ 0.000000] BIOS-e820: 00000000c7e90000 - 00000000c7e9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7e9e000 - 00000000c7ee0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ee0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7e90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] RAMDISK: 34974000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb120 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7e90000 00048 (v01 MSI OEMSLIC 20100622 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7e90200 00084 (v01 7640MS A7640100 20100622 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7e905e0 09449 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7e9e000 00040
[ 0.000000] ACPI: APIC 00000000c7e90390 00088 (v01 7640MS A7640100 20100622 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7e90420 0003C (v01 7640MS OEMMCFG 20100622 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000c7e90460 00176 (v01 MSI OEMSLIC 20100622 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7e9e040 00072 (v01 7640MS A7640100 20100622 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7e9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000c7e9a6f0 00038 (v01 7640MS OEMHPET 20100622 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000c7e9a730 00100 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 00000000c7e9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000c7e90
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at c7f00000 (gap: c7f00000:37f00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001a00000 s86144 r8192 d24448 u262144
[ 0.000000] pcpu-alloc: s86144 r8192 d24448 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064858
[ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro console=tty0 console=ttyS0,115200n8 amd_iomm
u_dump
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] Subtract (56 early reservations)
[ 0.000000] #1 [0001000000 - 00018bd464] TEXT DATA BSS
[ 0.000000] #2 [0034974000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [00018be000 - 00018be10b] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009ac00 - 00000fd6a0] BIOS reserved
[ 0.000000] #7 [00000fd924 - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000fd6a0 - 00000fd924] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #11 [0000014000 - 0000015000] PGTABLE
[ 0.000000] #12 [00018be140 - 00018bf140] BOOTMEM
[ 0.000000] #13 [00018bd480 - 00018bd880] BOOTMEM
[ 0.000000] #14 [00020c0000 - 00020c1000] BOOTMEM
[ 0.000000] #15 [00020c1000 - 00020c2000] BOOTMEM
[ 0.000000] #16 [0002200000 - 0009400000] MEMMAP 0
[ 0.000000] #17 [00018bd880 - 00018bda00] BOOTMEM
[ 0.000000] #18 [00018bf140 - 00018d7140] BOOTMEM
[ 0.000000] #19 [00018d7140 - 00018ef140] BOOTMEM
[ 0.000000] #20 [00018f0000 - 00018f1000] BOOTMEM
[ 0.000000] #21 [00018bda00 - 00018bda41] BOOTMEM
[ 0.000000] #22 [00018bda80 - 00018bdb06] BOOTMEM
[ 0.000000] #23 [00018bdb40 - 00018bdd70] BOOTMEM
[ 0.000000] #24 [00018bdd80 - 00018bdde8] BOOTMEM
[ 0.000000] #25 [00018bde00 - 00018bde68] BOOTMEM
[ 0.000000] #26 [00018bde80 - 00018bdee8] BOOTMEM
[ 0.000000] #27 [00018bdf00 - 00018bdf68] BOOTMEM
[ 0.000000] #28 [00018bdf80 - 00018bdfe8] BOOTMEM
[ 0.000000] #29 [00018ef140 - 00018ef1a8] BOOTMEM
[ 0.000000] #30 [00018ef1c0 - 00018ef228] BOOTMEM
[ 0.000000] #31 [00018ef240 - 00018ef2a8] BOOTMEM
[ 0.000000] #32 [00018ef2c0 - 00018ef328] BOOTMEM
[ 0.000000] #33 [00018ef340 - 00018ef39b] BOOTMEM
[ 0.000000] #34 [00018ef3c0 - 00018ef41b] BOOTMEM
[ 0.000000] #35 [0001a00000 - 0001a1d000] BOOTMEM
[ 0.000000] #36 [0001a40000 - 0001a5d000] BOOTMEM
[ 0.000000] #37 [0001a80000 - 0001a9d000] BOOTMEM
[ 0.000000] #38 [0001ac0000 - 0001add000] BOOTMEM
[ 0.000000] #39 [0001b00000 - 0001b1d000] BOOTMEM
[ 0.000000] #40 [0001b40000 - 0001b5d000] BOOTMEM
[ 0.000000] #41 [00018ef440 - 00018ef448] BOOTMEM
[ 0.000000] #42 [00018ef480 - 00018ef488] BOOTMEM
[ 0.000000] #43 [00018ef4c0 - 00018ef4d8] BOOTMEM
[ 0.000000] #44 [00018ef500 - 00018ef530] BOOTMEM
[ 0.000000] #45 [00018ef540 - 00018ef660] BOOTMEM
[ 0.000000] #46 [00018ef680 - 00018ef6c8] BOOTMEM
[ 0.000000] #47 [00018ef700 - 00018ef748] BOOTMEM
[ 0.000000] #48 [00018f1000 - 00018f9000] BOOTMEM
[ 0.000000] #49 [0009400000 - 0009c00000] BOOTMEM
[ 0.000000] #50 [0001b5d000 - 0001f5d000] BOOTMEM
[ 0.000000] #51 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #52 [0009c00000 - 000dc00000] BOOTMEM
[ 0.000000] #53 [00018f9000 - 0001919000] BOOTMEM
[ 0.000000] #54 [0001919000 - 0001959000] BOOTMEM
[ 0.000000] #55 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 8060444k/9306112k available (4456k kernel code, 919448k absent, 326220k reserved, 2863k data, 512
k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3599.817 MHz processor.
[ 0.012004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.66 BogoMIPS (lpj=12799332
)
[ 0.020002] pid_max: default: 32768 minimum: 301
[ 0.024023] Security Framework initialized
[ 0.028003] SELinux: Disabled at boot.
[ 0.032009] Mount-cache hash table entries: 256
[ 0.036063] Initializing cgroup subsys ns
[ 0.040002] Initializing cgroup subsys cpuacct
[ 0.044002] Initializing cgroup subsys devices
[ 0.048020] CPU: Physical Processor ID: 0
[ 0.052001] CPU: Processor Core ID: 0
[ 0.056001] mce: CPU supports 6 MCE banks
[ 0.060005] using C1E aware idle routine
[ 0.064001] Performance Events: AMD PMU driver.
[ 0.068002] ... version: 0
[ 0.072001] ... bit width: 48
[ 0.076001] ... generic registers: 4
[ 0.080001] ... value mask: 0000ffffffffffff
[ 0.084001] ... max period: 00007fffffffffff
[ 0.088001] ... fixed-purpose events: 0
[ 0.092001] ... event mask: 000000000000000f
[ 0.096439] ACPI: Core revision 20100428
[ 0.110148] Setting APIC routing to flat
[ 0.112261] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.156330] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
[ 0.164000] Booting Node 0, Processors #1
[ 0.256010] System has AMD C1E enabled
[ 0.256048] #2
[ 0.256010] Switch to broadcast mode on CPU1
[ 0.348010] Switch to broadcast mode on CPU2
[ 0.348046] #3
[ 0.440026] Switch to broadcast mode on CPU3
[ 0.440068] #4
[ 0.532027] Switch to broadcast mode on CPU4
[ 0.532068] #5 Ok.
[ 0.624031] Switch to broadcast mode on CPU5
[ 0.624041] Brought up 6 CPUs
[ 0.624043] Total of 6 processors activated (38401.16 BogoMIPS).
[ 0.628046] Switch to broadcast mode on CPU0
[ 0.632438] regulator: core version 0.5
[ 0.636120] NET: Registered protocol family 16
[ 0.644189] TOM: 00000000c8000000 aka 3200M
[ 0.648009] TOM2: 0000000238000000 aka 9088M
[ 0.652061] ACPI: bus type pci registered
[ 0.656126] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.660001] PCI: not using MMCONFIG
[ 0.664001] PCI: Using configuration type 1 for base access
[ 0.668000] PCI: Using configuration type 1 for extended access
[ 0.673835] bio: create slab <bio-0> at 0
[ 0.680839] ACPI Error (dswload-0677): [PCI0] Namespace lookup failure, AE_NOT_FOUND
[ 0.688001] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20100428/psloop-231)
[ 0.696001] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff818a23d0), AE_NOT_FOUND
[ 0.705300] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.720687] ACPI: Interpreter enabled
[ 0.724001] ACPI: (supports S0 S5)
[ 0.727118] ACPI: Using IOAPIC for interrupt routing
[ 0.728034] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.732885] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.757317] ACPI Warning: Incorrect checksum in table [OEMB] - 0x8E, should be 0x8D (20100428/tbutils-314)
[ 0.766070] ACPI: No dock devices found.
[ 0.768001] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.772096] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.776243] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.780001] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.784001] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.788001] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.792001] pci_root PNP0A03:00: host bridge window [mem 0xc8000000-0xdfffffff]
[ 0.796001] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.800980] pci 0000:00:02.0: PCI bridge to [bus 0d-0d]
[ 0.804135] pci 0000:00:05.0: PCI bridge to [bus 0c-0c]
[ 0.808110] pci 0000:00:06.0: PCI bridge to [bus 0b-0b]
[ 0.812106] pci 0000:00:0a.0: PCI bridge to [bus 09-0a]
[ 0.816376] pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
[ 0.820100] pci 0000:00:0b.0: PCI bridge to [bus 05-08]
[ 0.824169] pci 0000:05:00.0: PCI bridge to [bus 06-08]
[ 0.828142] pci 0000:06:01.0: PCI bridge to [bus 08-08]
[ 0.832132] pci 0000:06:02.0: PCI bridge to [bus 07-07]
[ 0.836114] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.840119] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.848067] pci 0000:00:15.0: PCI bridge to [bus 02-02]
[ 0.860550] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 14 15)
[ 0.865920] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15)
[ 0.873738] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *7 10 11 14 15)
[ 0.880669] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
[ 0.885914] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 14 15)
[ 0.889895] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
[ 0.896634] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
[ 0.901888] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.906156] vgaarb: device added: PCI:0000:0d:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.908004] vgaarb: loaded
[ 0.912165] SCSI subsystem initialized
[ 0.916190] usbcore: registered new interface driver usbfs
[ 0.920074] usbcore: registered new interface driver hub
[ 0.924085] usbcore: registered new device driver usb
[ 0.928160] PCI: Using ACPI for IRQ routing
[ 0.932284] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.936916] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.941800] Switching to clocksource tsc
[ 0.944908] pnp: PnP ACPI init
[ 0.947648] ACPI: bus type pnp registered
[ 0.954240] pnp: PnP ACPI: found 14 devices
[ 0.958641] ACPI: ACPI bus type pnp unregistered
[ 0.963286] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.970269] system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved
[ 0.976905] system 00:08: [io 0x0600-0x06df] has been reserved
[ 0.982848] system 00:08: [io 0x0ae0-0x0aef] has been reserved
[ 0.988791] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.995778] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.002416] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 1.008358] system 00:0b: [io 0x040b] has been reserved
[ 1.013693] system 00:0b: [io 0x04d6] has been reserved
[ 1.019029] system 00:0b: [io 0x0c00-0x0c01] has been reserved
[ 1.024971] system 00:0b: [io 0x0c14] has been reserved
[ 1.030303] system 00:0b: [io 0x0c50-0x0c51] has been reserved
[ 1.036245] system 00:0b: [io 0x0c52] has been reserved
[ 1.041581] system 00:0b: [io 0x0c6c] has been reserved
[ 1.046914] system 00:0b: [io 0x0c6f] has been reserved
[ 1.052249] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved
[ 1.058191] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved
[ 1.064132] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved
[ 1.070074] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved
[ 1.076015] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved
[ 1.081956] system 00:0b: [io 0x0800-0x089f] has been reserved
[ 1.087896] system 00:0b: [io 0x0b00-0x0b1f] has been reserved
[ 1.093839] system 00:0b: [io 0x0b20-0x0b3f] has been reserved
[ 1.099779] system 00:0b: [io 0x0900-0x090f] has been reserved
[ 1.105720] system 00:0b: [io 0x0910-0x091f] has been reserved
[ 1.111662] system 00:0b: [io 0xfe00-0xfefe] has been reserved
[ 1.117605] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
[ 1.124238] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
[ 1.130874] system 00:0b: [mem 0xfed80000-0xfed80fff] has been reserved
[ 1.137509] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.144143] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.151125] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.157758] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.164754] system 00:0d: [mem 0x00100000-0xc7ffffff] could not be reserved
[ 1.171739] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.183293] pci 0000:00:02.0: PCI bridge to [bus 0d-0d]
[ 1.188866] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.194982] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.201793] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.209557] pci 0000:00:05.0: PCI bridge to [bus 0c-0c]
[ 1.214806] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 1.220921] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.227728] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 1.235494] pci 0000:00:06.0: PCI bridge to [bus 0b-0b]
[ 1.240755] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 1.246870] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 1.253677] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
[ 1.261444] pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
[ 1.266691] pci 0000:09:00.0: bridge window [io disabled]
[ 1.272376] pci 0000:09:00.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.279187] pci 0000:09:00.0: bridge window [mem pref disabled]
[ 1.285304] pci 0000:00:0a.0: PCI bridge to [bus 09-0a]
[ 1.290551] pci 0000:00:0a.0: bridge window [io disabled]
[ 1.296234] pci 0000:00:0a.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.303042] pci 0000:00:0a.0: bridge window [mem pref disabled]
[ 1.309156] pci 0000:06:01.0: PCI bridge to [bus 08-08]
[ 1.314402] pci 0000:06:01.0: bridge window [io disabled]
[ 1.320087] pci 0000:06:01.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 1.326893] pci 0000:06:01.0: bridge window [mem pref disabled]
[ 1.333011] pci 0000:06:02.0: PCI bridge to [bus 07-07]
[ 1.338261] pci 0000:06:02.0: bridge window [io 0xa000-0xbfff]
[ 1.344377] pci 0000:06:02.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 1.351183] pci 0000:06:02.0: bridge window [mem pref disabled]
[ 1.357299] pci 0000:05:00.0: PCI bridge to [bus 06-08]
[ 1.362545] pci 0000:05:00.0: bridge window [io 0xa000-0xbfff]
[ 1.368662] pci 0000:05:00.0: bridge window [mem 0xfe400000-0xfe5fffff]
[ 1.375470] pci 0000:05:00.0: bridge window [mem pref disabled]
[ 1.381585] pci 0000:00:0b.0: PCI bridge to [bus 05-08]
[ 1.386831] pci 0000:00:0b.0: bridge window [io 0xa000-0xbfff]
[ 1.392946] pci 0000:00:0b.0: bridge window [mem 0xfe300000-0xfe5fffff]
[ 1.399753] pci 0000:00:0b.0: bridge window [mem pref disabled]
[ 1.405870] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 1.411116] pci 0000:00:0d.0: bridge window [io disabled]
[ 1.416807] pci 0000:00:0d.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 1.423614] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 1.429731] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 1.434977] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 1.441092] pci 0000:00:14.4: bridge window [mem disabled]
[ 1.446774] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 1.452889] pci 0000:00:15.0: PCI bridge to [bus 02-02]
[ 1.458137] pci 0000:00:15.0: bridge window [io disabled]
[ 1.463817] pci 0000:00:15.0: bridge window [mem disabled]
[ 1.469497] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 1.475619] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 1.482346] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 1.489073] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.495801] pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
[ 1.502535] pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
[ 1.509263] pci 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 1.515989] pci 0000:06:01.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 1.522715] pci 0000:06:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
[ 1.529441] pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
[ 1.536168] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.543007] NET: Registered protocol family 2
[ 1.547481] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.555296] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.566203] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.573253] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.579919] TCP reno registered
[ 1.583084] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.589229] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.595917] NET: Registered protocol family 1
[ 1.680962] pci 0000:09:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
[ 1.691019] Trying to unpack rootfs image as initramfs...
[ 2.471294] Freeing initrd memory: 55792k freed
[ 2.495453] DMA-API: preallocated 32768 debug entries
[ 2.500902] DMA-API: debugging enabled by kernel config
[ 2.506258] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: 3e info 1300
[ 2.512993] AMD-Vi: mmio-addr: 00000000f6000000
[ 2.518177] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:00.0 flags: 00
[ 2.524728] AMD-Vi: DEV_RANGE_END devid: 00:00.2
[ 2.529715] AMD-Vi: DEV_SELECT devid: 00:02.0 flags: 00
[ 2.535398] AMD-Vi: DEV_SELECT_RANGE_START devid: 0d:00.0 flags: 00
[ 2.541946] AMD-Vi: DEV_RANGE_END devid: 0d:00.1
[ 2.546934] AMD-Vi: DEV_SELECT devid: 00:05.0 flags: 00
[ 2.552614] AMD-Vi: DEV_SELECT devid: 0c:00.0 flags: 00
[ 2.558296] AMD-Vi: DEV_SELECT devid: 00:06.0 flags: 00
[ 2.563978] AMD-Vi: DEV_SELECT devid: 0b:00.0 flags: 00
[ 2.569659] AMD-Vi: DEV_SELECT devid: 00:0a.0 flags: 00
[ 2.575338] AMD-Vi: DEV_SELECT devid: 09:00.0 flags: 00
[ 2.581022] AMD-Vi: DEV_ALIAS_RANGE devid: 0a:01.0 flags: 00 devid_to: 0a:00.0
[ 2.588611] AMD-Vi: DEV_RANGE_END devid: 0a:1f.7
[ 2.593602] AMD-Vi: DEV_SELECT devid: 00:0b.0 flags: 00
[ 2.599282] AMD-Vi: DEV_SELECT devid: 05:00.0 flags: 00
[ 2.604964] AMD-Vi: DEV_SELECT devid: 06:01.0 flags: 00
[ 2.610644] AMD-Vi: DEV_SELECT devid: 08:00.0 flags: 00
[ 2.616327] AMD-Vi: DEV_SELECT devid: 06:02.0 flags: 00
[ 2.622007] AMD-Vi: DEV_SELECT_RANGE_START devid: 07:00.0 flags: 00
[ 2.628556] AMD-Vi: DEV_RANGE_END devid: 07:00.0
[ 2.633543] AMD-Vi: DEV_SELECT devid: 00:0d.0 flags: 00
[ 2.639224] AMD-Vi: DEV_SELECT devid: 04:00.0 flags: 00
[ 2.644916] AMD-Vi: DEV_SELECT devid: 00:11.0 flags: 00
[ 2.650596] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:12.0 flags: 00
[ 2.657145] AMD-Vi: DEV_RANGE_END devid: 00:12.2
[ 2.662133] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:13.0 flags: 00
[ 2.668680] AMD-Vi: DEV_RANGE_END devid: 00:13.2
[ 2.673668] AMD-Vi: DEV_SELECT devid: 00:14.0 flags: d7
[ 2.679350] AMD-Vi: DEV_SELECT devid: 00:14.3 flags: 00
[ 2.685030] AMD-Vi: DEV_SELECT devid: 00:14.4 flags: 00
[ 2.690714] AMD-Vi: DEV_ALIAS_RANGE devid: 03:00.0 flags: 00 devid_to: 00:14.4
[ 2.698302] AMD-Vi: DEV_RANGE_END devid: 03:1f.7
[ 2.703292] AMD-Vi: DEV_SELECT devid: 00:14.5 flags: 00
[ 2.708973] AMD-Vi: DEV_SELECT devid: 00:15.0 flags: 00
[ 2.714656] AMD-Vi: DEV_SELECT devid: 00:15.1 flags: 00
[ 2.720336] AMD-Vi: DEV_SELECT devid: 01:00.0 flags: 00
[ 2.726017] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:16.0 flags: 00
[ 2.732565] AMD-Vi: DEV_RANGE_END devid: 00:16.2
[ 2.737562] pci 0000:00:00.2: PCI INT A -> GSI 55 (level, low) -> IRQ 55
[ 2.744588] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40
[ 2.758364] BUG: unable to handle kernel NULL pointer dereference at 0000000000000118
[ 2.760899] IP: [<ffffffff810274c2>] domain_for_device+0x21/0x7b
[ 2.760899] PGD 0
[ 2.760899] Oops: 0000 [#1] SMP
[ 2.760899] last sysfs file:
[ 2.760899] CPU 0
[ 2.760899] Modules linked in:
[ 2.760899]
[ 2.760899] Pid: 1, comm: swapper Not tainted 2.6.352.6.35-vanilla-xhci-isoc+ #2 890FXA-GD70 (MS-7640) /MS-7640
[ 2.760899] RIP: 0010:[<ffffffff810274c2>] [<ffffffff810274c2>] domain_for_device+0x21/0x7b
[ 2.760899] RSP: 0018:ffff880237c7fe20 EFLAGS: 00010282
[ 2.760899] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff812548b8
[ 2.760899] RDX: 0000000000000a08 RSI: 0000000000000037 RDI: ffff88023743c888
[ 2.760899] RBP: ffff880237c7fe50 R08: ffff880237442000 R09: ffff880237dceef0
[ 2.760899] R10: 3000001a00000000 R11: ffffffff810acaec R12: ffffffff816c7da0
[ 2.760899] R13: ffff880237fef380 R14: 0000000000000900 R15: ffff88023743c888
[ 2.760899] FS: 0000000000000000(0000) GS:ffff880001a00000(0000) knlGS:0000000000000000
[ 2.760899] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2.760899] CR2: 0000000000000118 CR3: 00000000016ba000 CR4: 00000000000006f0
[ 2.760899] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.760899] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 2.760899] Process swapper (pid: 1, threadinfo ffff880237c7e000, task ffff880237c7d3c0)
[ 2.760899] Stack:
[ 2.760899] ffffffff816c7da0 ffffffff81798c68 ffffffff816c7da0 ffff88022a82e800
[ 2.760899] <0> 0000000000000900 ffff88023743c800 ffff880237c7fea0 ffffffff81751dd7
[ 2.760899] <0> ffff880237c7fea0 ffff88022a82e810 ffff88023743c888 ffffffff81798c68
[ 2.760899] Call Trace:
[ 2.760899] [<ffffffff81751dd7>] amd_iommu_init_dma_ops+0x137/0x371
[ 2.760899] [<ffffffff81750d6e>] amd_iommu_init+0x288/0x466
[ 2.760899] [<ffffffff81745813>] ? pci_iommu_init+0x0/0x47
[ 2.760899] [<ffffffff81745833>] pci_iommu_init+0x20/0x47
[ 2.760899] [<ffffffff81002060>] do_one_initcall+0x5a/0x155
[ 2.760899] [<ffffffff8173e70b>] kernel_init+0x176/0x1ff
[ 2.760899] [<ffffffff81009364>] kernel_thread_helper+0x4/0x10
[ 2.760899] [<ffffffff8173e595>] ? kernel_init+0x0/0x1ff
[ 2.760899] [<ffffffff81009360>] ? kernel_thread_helper+0x0/0x10
[ 2.760899] Code: 41 5c 41 5d 41 5e 41 5f c9 c3 55 48 89 e5 41 57 49 89 ff 41 56 41 55 41 54 53 31 db 48 83 ec 08 4c
8b af 18 01 00 00 49 8b 45 18 <4c> 8b a0 18 01 00 00 4d 85 e4 74 3e 48 c7 c7 c0 7e 6c 81 e8 11
[ 2.760899] RIP [<ffffffff810274c2>] domain_for_device+0x21/0x7b
[ 2.760899] RSP <ffff880237c7fe20>
[ 2.760899] CR2: 0000000000000118
[ 3.005043] ---[ end trace 6d450e935ee1897c ]---
[ 3.009690] Kernel panic - not syncing: Attempted to kill init!
[ 3.015630] Pid: 1, comm: swapper Tainted: G D 2.6.352.6.35-vanilla-xhci-isoc+ #2
[ 3.023914] Call Trace:
[ 3.026390] [<ffffffff8145524f>] panic+0xb1/0x12a
[ 3.031204] [<ffffffff8108831f>] ? call_rcu_sched+0x10/0x12
[ 3.036893] [<ffffffff8108832a>] ? call_rcu+0x9/0xb
[ 3.041897] [<ffffffff81043f2e>] ? put_files_struct+0xb5/0xc2
[ 3.047751] [<ffffffff8104bfec>] ? exit_ptrace+0x33/0x131
[ 3.053262] [<ffffffff81045567>] do_exit+0x78/0x6fa
[ 3.058249] [<ffffffff81042fe9>] ? kmsg_dump+0x126/0x140
[ 3.063670] [<ffffffff8100c30c>] oops_end+0x91/0x96
[ 3.068659] [<ffffffff8102a786>] no_context+0x1f3/0x202
[ 3.073994] [<ffffffff810ac1b7>] ? get_page_from_freelist+0x410/0x4d3
[ 3.080542] [<ffffffff8102a955>] __bad_area_nosemaphore+0x1c0/0x1e6
[ 3.086916] [<ffffffff8102a989>] bad_area_nosemaphore+0xe/0x10
[ 3.092857] [<ffffffff8102ac82>] do_page_fault+0x16d/0x31a
[ 3.098454] [<ffffffff81457bb5>] page_fault+0x25/0x30
[ 3.103614] [<ffffffff810acaec>] ? get_zeroed_page+0x11/0x15
[ 3.109382] [<ffffffff812548b8>] ? match_pci_dev_by_id+0x0/0x5c
[ 3.115410] [<ffffffff810274c2>] ? domain_for_device+0x21/0x7b
[ 3.121352] [<ffffffff81751dd7>] amd_iommu_init_dma_ops+0x137/0x371
[ 3.127726] [<ffffffff81750d6e>] amd_iommu_init+0x288/0x466
[ 3.133408] [<ffffffff81745813>] ? pci_iommu_init+0x0/0x47
[ 3.139002] [<ffffffff81745833>] pci_iommu_init+0x20/0x47
[ 3.144511] [<ffffffff81002060>] do_one_initcall+0x5a/0x155
[ 3.150190] [<ffffffff8173e70b>] kernel_init+0x176/0x1ff
[ 3.155613] [<ffffffff81009364>] kernel_thread_helper+0x4/0x10
[ 3.161555] [<ffffffff8173e595>] ? kernel_init+0x0/0x1ff
[ 3.166975] [<ffffffff81009360>] ? kernel_thread_helper+0x0/0x10
00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part [1002:5a11] (rev 02)
Subsystem: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part [1002:5a11]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable-
Address: 00000000 Data: 0000

00:00.2 Generic system peripheral [0806]: ATI Technologies Inc Device [1002:5a23]
Subsystem: ATI Technologies Inc Device [1002:5a23]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Capabilities: [40] Secure device <?>
Capabilities: [54] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+

00:02.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 91.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee3f00c Data: 4171
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Controls <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:05.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 5, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee3f00c Data: 4179
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Controls <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:06.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000cfe00000-00000000cfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 6, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee3f00c Data: 4181
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Controls <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 2, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee3f00c Data: 4189
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Controls <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:0b.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=08, sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe300000-fe5fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 5, PowerLimit 31.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee3f00c Data: 4191
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Controls <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:0d.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe200000-fe2fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 4, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee3f00c Data: 4199
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Controls <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 82
Region 0: I/O ports at 6000 [size=8]
Region 1: I/O ports at 5000 [size=4]
Region 2: I/O ports at 3000 [size=8]
Region 3: I/O ports at 2000 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at fe0ff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
Address: 00000000fee3f00c Data: 41c9
Capabilities: [70] SATA HBA <?>
Capabilities: [a4] PCIe advanced features <?>
Kernel driver in use: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe0fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe0ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe0fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe0ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: i2c-piix4

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe0fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 20, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee3f00c Data: 41a1
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:0000]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe0fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe0ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: [b]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: amd64_edac_mod

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

03:06.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 9800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: C-Media PCI
Kernel modules: snd-cmipci

04:00.0 USB Controller [0c03]: NEC Corporation Device [1033:0194] (rev 03) (prog-if 30)
Subsystem: Micro-Star International Co., Ltd. Device [1462:4257]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at fe2fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable+ Mask- TabSize=8
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
Capabilities: [150] #18
Kernel driver in use: xhci_hcd

05:00.0 PCI bridge [0604]: PLX Technology, Inc. Device [10b5:8613] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe3e0000 (32-bit, non-prefetchable) [size=128K]
Bus: primary=05, secondary=06, subordinate=08, sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe400000-fe5fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2 Enable+
Address: 00000000fee3f00c Data: 41a9
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Upstream Port, MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-SlotPowerLimit 31.000000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <2us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [a4] Subsystem: PLX Technology, Inc. Device [10b5:8613]
Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
Capabilities: [fb4] Advanced Error Reporting <?>
Capabilities: [138] Power Budgeting <?>
Capabilities: [148] Virtual Channel <?>
Capabilities: [448] Vendor Specific Information <?>
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

06:01.0 PCI bridge [0604]: PLX Technology, Inc. Device [10b5:8613] (rev ba) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2 Enable+
Address: 00000000fee3f00c Data: 41b1
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <2us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 71, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
Capabilities: [a4] Subsystem: PLX Technology, Inc. Device [10b5:8613]
Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
Capabilities: [fb4] Advanced Error Reporting <?>
Capabilities: [148] Virtual Channel <?>
Capabilities: [520] Access Controls <?>
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

06:02.0 PCI bridge [0604]: PLX Technology, Inc. Device [10b5:8613] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2 Enable+
Address: 00000000fee3f00c Data: 41b9
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <2us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 72, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
Capabilities: [a4] Subsystem: PLX Technology, Inc. Device [10b5:8613]
Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
Capabilities: [fb4] Advanced Error Reporting <?>
Capabilities: [148] Virtual Channel <?>
Capabilities: [520] Access Controls <?>
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
Kernel modules: shpchp

07:00.0 SATA controller [0106]: Device [1b4b:9123] (rev 10) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 83
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at fe4ff800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fe4e0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee3f00c Data: 41d1
Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: ahci

08:00.0 USB Controller [0c03]: NEC Corporation Device [1033:0194] (rev 03) (prog-if 30)
Subsystem: ASUSTeK Computer Inc. Device [1043:8413]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: Memory at fe5fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable+ Mask- TabSize=8
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
Capabilities: [150] #18
Kernel driver in use: xhci_hcd

09:00.0 PCI bridge [0604]: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge [104c:8231] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [80] Subsystem: Gammagraphx, Inc. Device [0000:0000]
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Kernel modules: shpchp

0a:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd

0a:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 45
Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd

0a:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Device [1838:1074]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 46
Region 0: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd

0b:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 99
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at cfeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at cfef8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fe7e0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee3f00c Data: 41ca
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-03
Kernel driver in use: r8169
Kernel modules: r8169

0c:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 98
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at cffff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at cfff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fe8e0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee3f00c Data: 41ba
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-04
Kernel driver in use: r8169
Kernel modules: r8169

0d:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon HD 3450 [1002:95c5] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:01d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe9e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>

0d:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series] [1002:aa28]
Subsystem: ASUSTeK Computer Inc. Device [1043:aa28]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 100
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee3f00c Data: 41e2
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

Next message: Randy Dunlap: "Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to2.6.35"
Previous message: Greg KH: "Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to2.6.35"
Next in thread: Joerg Roedel: "Re: [2.6.35] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 BUG:unable to handle kernel NULL pointer dereference at 0000000000000198"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]