Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to 2.6.35

From: Masayuki Ohtake
Date: Wed Aug 11 2010 - 00:34:48 EST


Hi Qi-san

I have found Macro 'TRUE' and 'FALSE' are used as setting value in the driver; still,
can't I use TRUE/FALSE macro ?
If not, How should we implement ?

+static u32 pch_interrupt_pending(struct pch_dev *pch_pdata)
+{
+
+ if (pch_pps_evt_get(pch_pdata) || pch_amms_evt_get(pch_pdata) ||
+ pch_asms_evt_get(pch_pdata) || pch_ttm_evt_get(pch_pdata)) {
+ pending = TRUE;
+ } else {
+ pending = FALSE;
+ }

+static enum pch_status
+pch_ptp_port_config_set(enum pch_ptpport ptpport,
+{
+
+ if (ptpportmode == PCH_1588PTP_PORT_MASTER) {
+ master_mode = TRUE;
+ timestamp_set = FALSE;
+ } else if (ptpportmode == PCH_1588PTP_PORT_SLAVE) {
+ master_mode = FALSE;
+ timestamp_set = FALSE;
+ } else if (ptpportmode == PCH_1588PTP_PORT_ANYMODE) {
+ master_mode = FALSE;
+ timestamp_set = TRUE;
+ } else {

Thanks, Ohtake

----- Original Message -----
From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
To: "Wang, Qi" <qi.wang@xxxxxxxxx>; "Greg KH" <gregkh@xxxxxxx>
Cc: <arjan@xxxxxxxxxxxxxxx>; "Khor, Andrew Chih Howe" <andrew.chih.howe.khor@xxxxxxxxx>; "Wang, Yong Y"
<yong.y.wang@xxxxxxxxx>; "LKML" <linux-kernel@xxxxxxxxxxxxxxx>; <meego-dev@xxxxxxxxx>
Sent: Wednesday, August 11, 2010 11:31 AM
Subject: Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to 2.6.35


> Hi Qi,
>
> > if (a == TRUE).... isn't necessary. Just if (a)... so you needn't 'TRUE'.
> > If (a == FALSE)... isn't necessary also. Just if (!a)..
> I understand.
> I will delete TRUE/FALSE definition.
>
> Thanks, Ohtake.
>
> ----- Original Message -----
> From: "Wang, Qi" <qi.wang@xxxxxxxxx>
> To: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>; "Greg KH" <gregkh@xxxxxxx>
> Cc: <arjan@xxxxxxxxxxxxxxx>; "Khor, Andrew Chih Howe" <andrew.chih.howe.khor@xxxxxxxxx>; "Wang, Yong Y"
> <yong.y.wang@xxxxxxxxx>; "LKML" <linux-kernel@xxxxxxxxxxxxxxx>; <meego-dev@xxxxxxxxx>
> Sent: Wednesday, August 11, 2010 11:18 AM
> Subject: RE: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to 2.6.35
>
>
> > > -----Original Message-----
> > > From: Masayuki Ohtake [mailto:masa-korg@xxxxxxxxxxxxxxx]
> > > Sent: Wednesday, August 11, 2010 10:15 AM
> > > To: Greg KH; Wang, Qi
> > > Cc: arjan@xxxxxxxxxxxxxxx; Khor, Andrew Chih Howe; Wang, Yong Y; LKML;
> > > meego-dev@xxxxxxxxx
> > > Subject: Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to
> > > 2.6.35
> > >
> > > > > > +#define TRUE 1
> > > > > > +#define FALSE 0
> > > > >
> > > > > These lines should not be needed at all.
> > > > OKI-san, please remove them, Those definition is useless.
> > >
> > > Is the above definition is necessary?
> > > I can't find appropriate header file defines 'TRUE' and 'FALSE'.
> > > In addition, some drivers have these definitions.
> > > For example, drivers/char/mwave/smapi.h has the above definitions.
> >
> > if (a == TRUE).... isn't necessary. Just if (a)... so you needn't 'TRUE'.
> > If (a == FALSE)... isn't necessary also. Just if (!a)..
> >
> > Best Regards,
> > Qi.
> > >
> > > Thanks, Ohtake
> > > ----- Original Message -----
> > > From: "Wang, Qi" <qi.wang@xxxxxxxxx>
> > > To: "Greg KH" <gregkh@xxxxxxx>; "Masayuki Ohtak"
> > > <masa-korg@xxxxxxxxxxxxxxx>
> > > Cc: <meego-dev@xxxxxxxxx>; "LKML" <linux-kernel@xxxxxxxxxxxxxxx>;
> > > "Wang, Yong Y" <yong.y.wang@xxxxxxxxx>; "Khor, Andrew
> > > Chih Howe" <andrew.chih.howe.khor@xxxxxxxxx>; <arjan@xxxxxxxxxxxxxxx>
> > > Sent: Wednesday, August 11, 2010 10:20 AM
> > > Subject: RE: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to
> > > 2.6.35
> > >
> > >
> > > > > -----Original Message-----
> > > > > From: Greg KH [mailto:gregkh@xxxxxxx]
> > > > > Sent: Wednesday, August 11, 2010 1:14 AM
> > > > > To: Masayuki Ohtak
> > > > > Cc: meego-dev@xxxxxxxxx; LKML; Wang, Qi; Wang, Yong Y; Khor, Andrew
> > > > > Chih Howe; arjan@xxxxxxxxxxxxxxx
> > > > > Subject: Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_IEEE1588 driver to
> > > > > 2.6.35
> > > > >
> > > > > On Tue, Aug 10, 2010 at 07:32:04PM +0900, Masayuki Ohtak wrote:
> > > > > > IEEE1588 driver of Topcliff PCH
> > > > > >
> > > > > > Topcliff PCH is the platform controller hub that is going to be used in
> > > > > > Intel's upcoming general embedded platform. All IO peripherals in
> > > > > > Topcliff PCH are actually devices sitting on AMBA bus.
> > > > > > Topcliff PCH has IEEE1588 I/F. This driver enables IEEE1588 function on
> > > CAN
> > > > > or
> > > > > > Ethernet communications.
> > > > >
> > > > > So it's a CAN or Ethernet driver? If so, why isn't this a network
> > > > > driver like the CAN and Ethernet drivers?
> > > >
> > > > This socket CAN drivers which can use Berkeley socket API, and the Linux
> > > network stack and implements the CAN device
> > > drivers as network interfaces.
> > > > >
> > > > > > +#ifdef __GNUC__
> > > > > > +#define UNUSED __attribute__ ((unused))
> > > > > > +#define UNUSED_ARG(x)
> > > > > > +#else
> > > > > > +#define UNUSED
> > > > > > +#define UNUSED_ARG(x) (void) x
> > > > > > +#endif
> > > > > > +
> > > > > > +
> > > > > > +#define TRUE 1
> > > > > > +#define FALSE 0
> > > > >
> > > > > These lines should not be needed at all.
> > > > OKI-san, please remove them, Those definition is useless.
> > > > >
> > > > > > +#define IOC_1588_BASE 0xf8
> > > > >
> > > > > Do you have documentation for these new ioctls you are creating? It's a
> > > > > lot of them:
> > > > >
> > > > > > +#define IOCTL_1588_PORT_CONFIG_SET \
> > > > > > + _IOW(IOC_1588_BASE, 0, struct pch_portcfg_ioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_PORT_CONFIG_GET \
> > > > > > + _IOWR(IOC_1588_BASE, 1, struct pch_portcfg_ioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_RX_POLL _IOWR(IOC_1588_BASE, 2, struct
> > > > > pch_rxtxpoll_ioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_TX_POLL _IOWR(IOC_1588_BASE, 3, struct
> > > > > pch_rxtxpoll_ioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_CAN_POLL _IOWR(IOC_1588_BASE, 4, struct
> > > > > pch_canpoll_ioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_SYS_TIME_GET _IOR(IOC_1588_BASE, 5, struct
> > > > > pch_tim_val)
> > > > > > +
> > > > > > +#define IOCTL_1588_SYS_TIME_SET _IOW(IOC_1588_BASE, 6, struct
> > > > > pch_tim_val)
> > > > > > +
> > > > > > +#define IOCTL_1588_TICK_RATE_SET _IOW(IOC_1588_BASE, 7, __u32)
> > > > > > +
> > > > > > +#define IOCTL_1588_TICK_RATE_GET _IOR(IOC_1588_BASE, 8, __u32)
> > > > > > +
> > > > > > +#define IOCTL_1588_TARG_TIME_INTRPT_ENABLE _IO(IOC_1588_BASE,
> > > 9)
> > > > > > +
> > > > > > +#define IOCTL_1588_TARG_TIME_INTRPT_DISABLE
> > > _IO(IOC_1588_BASE,
> > > > > 10)
> > > > > > +
> > > > > > +#define IOCTL_1588_TARG_TIME_POLL \
> > > > > > + _IOR(IOC_1588_BASE, 11, struct pch_timepoll_ioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_TARG_TIME_SET \
> > > > > > + _IOW(IOC_1588_BASE, 12, struct pch_tim_val)
> > > > > > +
> > > > > > +#define IOCTL_1588_TARG_TIME_GET \
> > > > > > + _IOR(IOC_1588_BASE, 13, struct pch_tim_val)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TIME_INTRPT_ENABLE
> > > _IOW(IOC_1588_BASE,
> > > > > 14,\
> > > > > > + enum pch_auxmode)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TIME_INTRPT_DISABLE
> > > _IOW(IOC_1588_BASE,
> > > > > 15,\
> > > > > > + enum pch_auxmode)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TIME_POLL \
> > > > > > + _IOWR(IOC_1588_BASE, 16, struct pch_timepoll_ioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_RESET _IO(IOC_1588_BASE, 17)
> > > > > > +
> > > > > > +#define IOCTL_1588_CHNL_RESET _IOW(IOC_1588_BASE, 18, enum
> > > > > pch_ptpport)
> > > > > > +
> > > > > > +#define IOCTL_1588_STATS_GET _IOR(IOC_1588_BASE, 19, struct
> > > > > pch_stats)
> > > > > > +
> > > > > > +#define IOCTL_1588_STATS_RESET _IO(IOC_1588_BASE, 20)
> > > > > > +
> > > > > > +#define IOCTL_1588_SHOW_ALL _IO(IOC_1588_BASE, 21)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TARG_TIME_INTRPT_ENABLE
> > > > > _IO(IOC_1588_BASE, 22)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TARG_TIME_INTRPT_DISABLE
> > > > > _IO(IOC_1588_BASE, 23)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TARG_TIME_POLL \
> > > > > > + _IOR(IOC_1588_BASE, 24, struct pch_timepoll_ioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TARG_TIME_SET \
> > > > > > + _IOW(IOC_1588_BASE, 25, struct pch_tim_val)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TARG_TIME_GET \
> > > > > > + _IOR(IOC_1588_BASE, 26, struct pch_tim_val)
> > > > > > +
> > > > > > +#define IOCTL_1588_PULSE_PER_SEC_INTRPT_ENABLE
> > > > > _IO(IOC_1588_BASE, 27)
> > > > > > +
> > > > > > +#define IOCTL_1588_PULSE_PER_SEC_INTRPT_DISABLE
> > > > > _IO(IOC_1588_BASE, 28)
> > > > > > +
> > > > > > +#define IOCTL_1588_TARG_TIME_NOTIFY \
> > > > > > + _IOR(IOC_1588_BASE, 29, struct pch_tim_val)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TIME_NOTIFY \
> > > > > > + _IOR(IOC_1588_BASE, 30, struct pch_auxtimeioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TARG_TIME_NOTIFY \
> > > > > > + _IOR(IOC_1588_BASE, 31, struct pch_tim_val)
> > > > > > +
> > > > > > +#define IOCTL_1588_PULSE_PER_SEC_NOTIFY _IOR(IOC_1588_BASE,
> > > 32,
> > > > > __u32)
> > > > > > +
> > > > > > +#define IOCTL_1588_TARG_TIME_CLR_NOTIFY _IO(IOC_1588_BASE, 33)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TIME_CLR_NOTIFY _IO(IOC_1588_BASE, 34)
> > > > > > +
> > > > > > +#define IOCTL_1588_AUX_TARG_TIME_CLR_NOTIFY
> > > _IO(IOC_1588_BASE,
> > > > > 35)
> > > > > > +
> > > > > > +#define IOCTL_1588_PULSE_PER_SEC_CLR_NOTIFY
> > > _IO(IOC_1588_BASE,
> > > > > 36)
> > > > > > +
> > > > > > +#define IOCTL_1588_PULSE_PER_SEC_TIME_GET _IOR(IOC_1588_BASE,
> > > 37,
> > > > > __u32)
> > > > > > +
> > > > > > +#define IOCTL_1588_PULSE_PER_SEC_TIME_SET _IOW(IOC_1588_BASE,
> > > 38,
> > > > > __u32)
> > > > > > +
> > > > > > +#define IOCTL_1588_PORT_VERSION_SET \
> > > > > > + _IOW(IOC_1588_BASE, 39, struct pch_versionioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_PORT_VERSION_GET \
> > > > > > + _IOWR(IOC_1588_BASE, 40, struct pch_versionioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_PORT_OPERATION_MODE_SET \
> > > > > > + _IOW(IOC_1588_BASE, 41, struct pch_opemode_ioctl)
> > > > > > +
> > > > > > +#define IOCTL_1588_PORT_OPERATION_MODE_GET \
> > > > > > + _IOWR(IOC_1588_BASE, 42, struct pch_opemode_ioctl)
> > > > >
> > > > > Do they all have to be ioctls? What exactly are they doing?
> > > > >
> > > > > And are they 32/64bit safe?
> > > > >
> > > > > thanks,
> > > > >
> > > > > greg k-h
> > > >
> > > > Best Regards,
> > > > Qi
> > > >
> > >
> >
> >
>
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/